Updated BIOS for a boot with USB (external)?

Similar Questions

• Updating BIOS for Satellite 1625CDT with XP Pro

  OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exploitation f12, it did nothing but initialize and beep at me a lot.

  How can I update the bios without having to install a new os (especially when i cannot reinstall pro because of no installation disc or recovery)

  Help, please

  Hello

  I checked the page of the Toshiba driver and there is a single place BIOS:
  This is version 1.11 of the 18/11/02.
  Have you verified that the BIOS Toshiba upgrade document?
  Please check. You will find this under the FAQ section on the support page.
  You will find the proper procedure the update of the BIOS.
  As far as I know, is a procedure to upgrade the BIOS 6.

  But I don't know if the upgrade of the BIOS allows you to use a memory of 256 MB.
  I found some information that this device can handle only modules memory 32 MB, 64 MB, 128 MB and max 160 MB memory.
  In this case you cannot use the module memory 256 MB

• Question about updating BIOS for Satellite 2450-101

  Hi, I want to update BIOS for my Satellite 2450-101 (model: PS245E-01TMY-IT). I downloaded the BIOS "bios - 20071008123347.zip" on Toshiba Europe site (see link below). Is this the right one for my PC?
  What do you propose to make a backup of the existing before installing the new?

  I want to make an extension of memory, but I'm not sure whether this is necessary. Do you reccoment to update the bios anyway?

  Thank you very much!

  BIOS

  Hello!

  Yes, it's the good BIOS because it s also for your model (Satellite 2450-101).

  A BIOS update is an upgrade of RAM is not necessary. The BIOS has nothing to do with the maximum RAM capacity.
  Satellite 2450-101 supports up to 1 GB, type PC2100 DDR - RAM.

  Good bye

• Updating BIOS for Sony VAIO PCG-4F1L (VGN-TX650P)

  Hello

  I can't find the BIOS update for the Sony VAIO PCG-4F1L (VGN-TX650P).

  Hello

  Yes, update BIOS for VGN-TX650P of computer model is not available for download.

  If it is available in the future, you can mark the page below and chek.

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VGNTX650P&template_id=1&Region_ID=1&tab=download#/do...

  VAIO CAre advise for these updates if you are using the original factory installation operating system.

  Thank you
  Jack

• Updating BIOS for Compaq Presario V5201US with the version of BIOS F.41

  Hello. Is it possible to update the version of the BIOS for my Compaq Presario V5201US laptop? This version is F.41

  There is a BIOS F.54 available here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3184257#n765

  The problem is this is an executable of Vista and there was problems with trying to flash executable under Windows 7 Vista if that's what you run. What problem do you think that will set a BIOS update?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Boot from USB external HDD - Tecra M5

  Hello!

  Does anyone know is it possible for an OS boot from disk external DRIVE connected to the laptop via USB? There are 'Priority HARD drive' in the configuration of the BIOS with a possibility to choose: USB - integrable - second HARD drive. But it does not work :(

  I tried to start Windows 98 from the external USB - HDD even on my computer at home. Everything is OK...

  My Tecra M5 BIOS version is 3.20.

  TIA

  As far as I know, it won't work. Use of USB stick bootable Yes but not boot OS from the external HARD drive.

• HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

  My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

  The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

  I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

  Could someone help me please?

  Thank you very much!

  Hi @db69613,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

  I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

  First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

  If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

  However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

  I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

  Please take care now and have a wonderful week ahead.

• HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

  Hello

  I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

  Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

  Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

  Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Supports up to 8 GB on 64 bit computers

  Supports up to 4 GB on 32-bit computers

  4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

  BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

  Exit the: 2009-08-03

  Version: 5.05

  Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

  Fix/development:
  Resolves a problem with USB not detected mass storage devices.

  Updates the boot order to place the optical drive before the hard drive.

  Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

  Updates vBIOS to address issues HDMI.

  Updates the strategy thermal processor.

  Fixes an issue with the BIOS fault recovery if the card reader is connected.

• HP ProDesk 600 G1 - unable to boot with USB

  Hello

  I received a new HP ProDesk 600 G1 yesterday and have had no luck getting it to begin on a USB key or external hard drive USB.  I normally install our image Corp. (Win 7 x 64 business) via the USB port.  In the Setup program, the key USB and USB HD are detected, but no matter what I put in the boot order when selecting F9 for boot options, the USB device is not available.

  Suggestions?

  Thank you...

  Problem solved.  In the Bios under Boot Secure - Legacy Support, Setup I changed to "Enabled".
  
  For Secure Boot, I changed it to disabled.

• Updated BIOS for Equium L20 missing docs?

  I recently downloaded the upgrade of Bios for the Equium L20 PSL2ZE.
  I need to this day with a bootable CD-ROM.

  In the FAQ, it says in the sub-heading "Option 2: update with CD-ROM" the following text:

  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"
  3. how to make a bootable CD-ROM please read the *.pdf file in the "docs" folder

  Problem is the Bios upgrade download does not contain the docs with the required pdf file. How to make the CD bootable, strange!

  Can someone please send me the document.

  Thank you very much
  Alum

  Hello

  Please don t mix old TRAD and new BIOS WIN updates.
  As far as I know old traditional BIOS update can be done with bootable CD but WIN version is updated to the BIOS which can be booted under Windows operating system.

• Last updated BIOS for E5 574G - 574L

  Hey guys, I need help here. to install Ubuntu 16.04.1 on my aspire, but I need to update my bios. But on the drivers Acer page, I found only updated to version 1.14, and I need at least a 1.15 or later to be able to install.  Can someone give me a light?

  Hey guys sorry not anwser before. Unfortunately I do not solve the problem with usb, so I did the installation with a dvd disc and it works. Don't know why but this happens, but will keep looking. Thanks for the support and the carel he really likes a community for me

• What the correct update BIOS for my Lenovo R61?

  Main question:

  I have a Lenovo R61 15.4 "laptop computer screen with IEEE. 1394  What is the good BIOS update version for my system?

  * The version on the Web the matrix file BIOS Lenovo page, 7KET72WW (1.22 - 1, 06), seems wrong and outdated compared to this page:

  http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us

  which indicates that it should be 7OETC1WW (2.21). **

  Background:

  This Lenovo R61 laptop has always been slow and difficult, with performance much worse than my old XP system with worst record.  Originally, I tried to reinstall Vista to remove the useless factory software I thought may be responsible for slowing down the system.  This was the beginning of many problems.  I had added a stick of 1 GB 2 brand new RAM for the system, and I couldn't properly reinstall Vista with the ThinkVantage tools.  When I contacted the support, they told me it was due to the system are different from the original specifications (additional RAM).  It's ridiculous, but also to correct.  In addition, my Windows key at the bottom of the laptop sticker was scratched and unreadable, directly from the factory.  Support told me that the key is not useful or necessary because the only way to reinstall Vista is using the ThinkVantage tools.  Once again, ridiculous, but after removing my extra RAM, I was able to reinstall Vista.  This did not help the performance, even with the additional software deleted.

  On the current problem:

  I have experience several daily BSOD. Analysis of accident of Vista generally points to the USB driver, sometimes the network adapter driver and often does not return anything.

  I want to update my BIOS, but I don't know which version to use.  According to the information of the system, my system model is 8932CTO. The current system BIOS is the 7OET24WW version (1.03).  I did a search on Google for this BIOS and found the following cached page:

  [ http://74.125.45.104/search?q=cache: jqsAECxdXDoJ:www-307.ibm.com/pc/support/site.wss/MIGR-68183.html+7OET24WW&hl=en&ct=clnk&cd=5&gl=us] It lists the following:

  This version supports the following systems:
  -ThinkPad R61 - 15.4-inch wide screen models
  Machine types: 8930 8933, 8934, 8935, 8936, 8937
  -ThinkPad R61i - model widescreen 15.4 inches with IEEE 1394
  Computer type: 8932

  The latest BIOS for my system model number is indicated as:

  Version:     2.21-1.08Release Date:     2008/09/16File link             File size             File description7ouj13us.exe             2,728,120             BIOS Update Utility
  
  The BIOS history is shown as:Utility version  BIOS version    Previous release  Embedded Controller version2.21-1.08        7OETC1WW (2.21) Current release   7KHT24WW (1.08)2.20-1.08        7OETC0WW (2.20) 7ouj12us          7KHT24WW (1.08)2.18-1.08        7OETB8WW (2.18) 7ouj10us          7KHT24WW (1.08)2.16-1.08        7OETB6WW (2.16) 7ouj09us          7KHT24WW (1.08)2.15-1.08        7OETB5WW (2.15) 7ouj08us          7KHT24WW (1.08)2.14-1.08        7OETB4WW (2.14) 7ouj07us          7KHT24WW (1.08)2.10-1.08        7OETB0WW (2.10) 7ouj05us          7KHT24WW (1.08)2.09-1.08        7OETA9WW (2.09) 7ouj04us          7KHT24WW (1.08)2.07-1.08        7OETA7WW (2.07) 7ouj03us          7KHT24WW (1.08)1.07-1.08        7OET28WW (1.07) 7ouj02us          7KHT24WW (1.08)1.03-1.06        7OET24WW (1.03) 7ouj01us          7KHT22WW (1.06)
  

  The first version of this list, 7OET24WW (1.03) matches the BIOS on my system, which indicates that I have to upgrade to the current version, 7OETC1WW (2.21).

  This page shows that my system model supports IEEE 1394 (Firewire), and of course, the Device Manager shows a RICOH OHCI Compliant IEEE 1394 Host Controller, even if my laptop is not a firewire port!  Then...

  QUESTION: why does my laptop have an IEEE 1394 controller, but no port?  It is used to something else? Safely disable the controller driver if it is pointless?

  The same page also lists the history of BIOS for thise models, and the current BIOS version does not match the name on the matrix of the file BIOS Lenovo - ThinkPad page here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=BMOE-3VAM8Y#r

  BIOS version          BIOS release date  Embedded controller version  Embedded controller release date
  R61 14.1 inch widescreen with IEEE 1394
  7LET52WW (1.22-1.06)  19 Sep 2007        Included in the BIOS Update Utility
  
  R61 14.1inch and 15.4inch widescreen without IEEE 1394
  7KET72WW (1.22-1.06)  28 Aug 2007        Included in the BIOS Update Utility
  
  R61 15 inch
  7QET25WW (1.07)       09 Sep 2007        Included in the BIOS Update Utility
  
  R61 14.1inch and 15.4inch widescreen without IEEE 1394
  7KET72WW (1.22-1.06)   28 Aug 2007       Included in the BIOS Update Utility
  

  My computer is a R61 widescreen 15.4 inches with IEEE 1394 (at least the controller).  NONE OF THESE VERSIONS OF BIOS MATCHES THE OTHER PAGE, I FOUND, WHICH SEEMS MORE ACCURATE!  Also, only one of the many, many BIOS versions presented on this page are from 2008.  So the page of the Lenovo BIOS file matrix totally out of date or what?

  What version of BIOS should I use to upgrade my system, and what else can I diagnose these BSOD and performance problems?

  Agotthelf is correct; 2.21 is the latest version of the BIOS, and to install it, you must burn it to a CD as an ISO file. I was too lazy to do.

  My R61, too, is the 15.4-inch (1680 x 1050) model, but unlike you, I have XP Professional and a 1394 a miniport. The reason your system shows Firewire, it's Ricoh Board which controls the 4 - 1 or 5-in-1 memory card reader includes the R61 Firewire controller. I guess it's convenient is you decide, as I do, to add a CardBus (or, as the case may be, an ExpressCard) with full major ports 1394 a(1) FireWire, 1394b (FireWire 2), or both.

• Updating BIOS for Satellite C55-A-1RG can not be downloaded - 404 not found

  I can't download the update of bios for laptop Satellite C55-A-1RG.
  I go to http://www.toshiba-greece.com/innovation/jsp/supportMyProduct.do?LNG=28&service=SE and when I click on the link

  02/12/14
  Update the BIOS
  Toshiba OS independent 1, 10 - WIN World Wide

  It shows me
  404 not found
  Nginx

  Nobody knows the correct link because I want to install windows 7, only the laptop for one of my clients and with the bios that have the laptop by default some options (start secure-> disable and start-> start MSC mode) and I can't install windows 7.

  If anyone knows of another way to install windows 7, it will be very useful.

  + The message was edited: link has been removed.

  Hello

  It seems that pilots could be downloaded again.

  You should be able to download this BIOS update package:
  [BIOS v1.10-VICTORY for Satellite C50-has, Satellite Pro C50-has, Satellite C55-has | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7936 & selSh ortMod = 4433 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 89306 & OS ID =-1 & driverLanguage = 42]

• Updating BIOS for Equium A60-181

  Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
  I was wondering is it worth the update, unfortunately, there is no information
  provided regarding the bugfixes or improvements? Also can I use the
  Windows update tool or use the bootable CD, it's just I'm not sure
  flashing Windows XP, except if it is a procedure without normal fault?

  see you soon,

  Richard S.

  Hi Richard

  Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.

  If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.

• Updating BIOS for Satellite Pro 4600

  Hello everyone,

  I'm trying to update the bios and I followed the instructions, but I don't know what the problem is.

  1 - download the files
  2 - unzip them filed in a non-bootable disk is.
  3 - restart the computer with the disk in.
  4 - press f12 during startup.
  5 - nothing happened, the system asks me remove the disk, but nothing is updated.

  Thanks for your help.

  Hello

  I found this statement to update the Toshiba BIOS for this series of portable:
  1 extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding the type of disk to use).
  2. make sure that the laptop is plugged into the sector.
  3. turn off the laptop.
  4. turn on the laptop with the F12 key. Press and hold until a short beep can be heard.
  5. the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward"will appear.
  6. place the floppy disk containing the BIOS upgrade in the floppy drive and press a key. FDD access will begin.
  7. When prompted by the message: "Please push the RESET switch (or turn the AC OFF power off / WE) to restart" remove the disk and press the RESET switch (if available) or turn the system off and turn it on again to restart the laptop.

  But note; Update the BIOS is always risky! If your laptop works ok, then update the BIOS is not really necessary!

  Greetings