Updated HP P6310 ethernet adapter

Similar Questions

• Update the driver Via Rhine II Fast Ethernet Adapter

  Help, please!

  I can update my Via Rhine II Fast Ethernet Adapter driver with the 3.84.0.1 64 bit version of Windows XP same dough I'm running a 32-bit Windows XP?

  I could not find a version to 32 bit Win XP.

  My current driver version is 3.32.0.417, and a few programs scan driver free, that I found on the Internet it were classified as 'old '. My Internet connection isn't going very well.

  My system information:

  Widows XP, home edition, service pack 3, version 2002, intel celeron 420 CPU @ 1.60 Ghz, 160 Ghz, 384 MB RAM

  Thank you very much and God bless you!

  Tiberiu, Romania

  # No, if it's only for XP - 64.

  A driver is 'old' does not mean that you need to replace.  The general rule for Windows drivers is, "if it ain't broke, don't fix it."  You should only update a driver if the device does not work correctly and you have reason to believe that the driver is at fault, or (b) the new pilot adds features that you want or need.

  OTOH, if you go to the real Web SITE (instead of random file download sites), you can find a driver for XP 64 and XP (i.e., XP-32) who seems to be newer than yours - version 3.87.  This driver is for the following models, which can be yours (you have failed to identify the specific model you have).

  Integrated VT8251, VT8231, VT8233, VT8235 & VT8237 integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)

• So, updated for Win 7. Clean install. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

  Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7

• Equium P200: realtek ethernet adapter Linux installation error

  I have an old Equium P200 - 1Ed, who started to play up.

  When I try to install Linux, it gives me an error for realtek ethernet adapter and I studied the problem on the forums.

  Apparently, my hard drive is old and decrepit.

  I tried to reinstall Vista from the default Toshiba CD, just out of curiosity, and installed fine, except, seemed unwilling to connect internet.

  Tried Linux, but still the same problem from realtek.

  Apparently I can download the driver bios flash and try to reinstall the bios... it looks like my last hope.

  Anyone know where I can get the bios driver for P200-1ED?

  Updates to the BIOS, you can find on toshiba BIOS support page - http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp

  To be honest I don't know if the BIOS update will help with the installation of Linux, but you can try it.

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• The ethernet adapter has been removed from the program. How to restore the adapter ethernet to the program?

  Ethernet adapter - deleted.

  the ethernet adapter has been removed from the program.  How to restore the adapter ethernet to the program?

  Thank you

  Ed

  Hi Ed,

  When you deleted the program, program who are you referring?

  You can try to perform a system restore and see if it helps.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

• This device cannot start. (Code 10) Windows 7 64 bit JMicron PCIe Gigabit Ethernet Adapter

  Apparently, I get this error at random times in the day.  My ethernet port just no longer works and I tried disabling and reactivation that used to (a while back) work.

  Then recently I was disabling and re-enabling it, it gets stuck in the 'disabled' and this error message appears when I open "Properties".  I tried to reinstall the drivers for the device with the CD of my laptop came with, but that has not worked so I looked on the site Web of Jmicron and found a newer driver who, after installing again, did not work.  I have a fixed work wireless, but not with no LAN no is a pain in the thigh.

  WIndows 7 64 bit Home Premium edition
  Sager NP 5165 Notebook
  JMicron PCI Express Gigabit Ethernet adapt

  Try to update the laptop bios and chipset software provided by your computer laptop oem (dell, hp, whoever). Fixed an instance I had 10 with a device error.

• Windows 7 Upgrade Advisor - Rhine II fast ethernet ADAPTER

  I am currently running XP SP3 32 bit on AMD Athlon 64, 2 GB RAM machine.  I want to upgrade to Windows 7 64 bit.

  I read this: http://windows.microsoft.com/is-IS/windows7/help/upgrading-from-windows-xp-to-windows-7

  I ran the Windows 7 Upgrade Advisor - version 64 bit says 9 questions, 8 of whom are software (Adobe, shockwave, .NET 1.1, etc.), but that makes me nervous is VIA Rhine II Fast Ethernet adapt driver would need to be updated.
  I run Belarc and identified as VT8237 chipset. so I downloaded the latest driver here: http://www.via.com.tw/en/support/drivers.jsp and got the 3.87 driver version dated Date may 5, 2011.
  I have re-ran Upgrade Advisor, and it is still showing that I have to get the latest driver.  I have the latest driver, using my CURRENT operating system to choose.
  Do I need to download the driver for the VT8237 selecting Windows 7 as OS?

  You need to download and save the driver Windows 7 for the VT8237.

  After the upgrade, you must apply the driver. Until you install the Windows 7 driver after the update you will not be able to access the internet.

  It would be wise download and save all drivers Windows 7 you might need for your system.

  The upgrade cheaper, assuming that the offer is available where you are, is to upgrade to Windows 8 at price special launch. You'll need the drivers Windows 8 If you did.

  Given that you want to move to 64-bit, you must upgrade to a club. If you have access to a 64-bit system, you can buy and download an upgrade in line 64-bit on this system. The upgrade is not bound to the system on which it is downloaded.

• Best for PC to Macbook Pro Ethernet adapter to transfer files

  Hello

  I was looking for a straight answer to this question. I am a new Mac user (Woo hoo) and I need to transfer my files from a PC to my new Macbook pro. Which is the best ethernet adapter (if this is important) do so... a USB adapter or the adapter thunderbolt?

  I thought I read that love at first sight was the fastest, but then I read that I might have a question of transfer to a PC.

  Thanks in advance!

  The best ethernet adapter's ethernet cable connecting ports ethernet on both computers.

  There is no need to bother with love at first sight or USB to do this.

• Ethernet adapter does not

  I can't get the hang of lightning Gigabit Ethernet Adapter (MD463LL/A) working on my Macbook Pro 15 inch 2014 (11.2).

  When I plug the unit in each port thunderbolt I don't see anything on the screen. However, when I look in the section "Thunderbolt" in system information, I see the following:

  

  When I look in Network preferences, I don't see anything:

  

  And when I try to add a new network interface, ethernet Thunderbolt is not listed:

  

  I searched around for this problem, and some have recommended the removal of all interfaces, killing the networkpreferences plist and restart. I tried this, and it did not help.

  Also, I went back the dongle assuming that I just got a bad copy and bought a new one. The same problem.

  Any ideas would be very appreciated.

  Did you turn off wifi and move the Thunder bolt to the top of the list. Set to zero if necessary

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• HP DL180 Gen9 server: HP 10 GB 2 port 561T Ethernet adapter

  Hello

  Can you help me if this 561T HP 10 GB 2 Port Ethernet adapter is Compatible with my HP DL180 Gen9 Server?

  Thank you

  Mark

  Hello

  This compatible list does not DL 180, but it is compatible with many other DL Gen8 servers:

  http://h20564.www2.HPE.com/hpsc/doc/public/display?docid=emr_na-c03909467

  It must be. But my suggestion: talk with representatives of HP in your region drirectly, they are ready to help you.

  Kind regards.

• Thunderbolt to Gigabit Ethernet adapter not working

  Hello

  I'm new to this community has never had a problem on my mac since I had last year.  MacBook Pro retina mi 2014 running El captain.

  My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.

  I use also fell in love with VGA Converter works on the two test port.

  I also reset the PRAM and the MSC still nothing.  Also restored some peripheral preference to another forum I found on the internet.

  I created another account from administrator to test to see if the interface resumes, still nothing.  How ever wifi works without problem

  Thanks in advance if anyone could help with my problem.

  Dump of information systems presents its collection as below.

  Bolt of lightning to Gigabit Ethernet Adapter:

  Name of seller: Apple Inc..

  Device name: Thunderbolt to Gigabit Ethernet Adapter

  Vendor ID: 0 x 1

  Device ID: 0 x 8003

  Revision of the device: 0x1

  UID: 0X0001000203A8FCF0

  Apple serial number: DTN450706APDWKHBZ

  Route of chain: 1

  Firmware Version: 5.5

  Port (upstream):

  Status: Connected device

  Link status: 0x2

  Speed: up to 10 Gb/s x 1

  Port Micro Firmware Version: 0.0.8

  I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.

• Cannot install Ethernet adapter integrated into my 300 S1700

  Hi guys,.

  I reinstalled my S1700-300 Satellite with W2K Pro. At the back of the laptop, it is possible to connect an ethernet cable, left for the modem, labeled plugin with "Ether". But Win2k is not able to find the ethernet adapter, do you know what to do or do you know where to find the driver of fitting for her?
  I also looked at the manual provided to Toshiba, but for this model nr. There is no information on an ethernet card, but I'm sure that on mine is a.

  Thank you
  Babsi

  Hi Babsi

  Please go to http://eu.computers.toshiba-europe.com. Under Support & downloads, you can find download drivers. Select your type of machine, OS and driver. There you can find driver LAN for W2K.

  Good bye

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?