Updated to 1.11 and the box still says v1.1

Similar Questions

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• When I start the computer, I get a box entitled RUNDLL. Inside of the box, it says: "error loading c:\windows\system32\reranavu.dll." under that, it says "the specified module is not found." ___what is this? How should I do? Thank you.

  Rundll system32

  Next time put please the details of your question in the body of the message instead of the subject line.

  The reranavu.dll file is malware. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup - be done only when you are sure that the computer is completely free of malware:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• I am trying to re-download Lightroom and when I hit the download button begin who appear in my email and enter the order number and the password, it says no order found. Help please... Urgent

  I am trying to re-download Lightroom and when I hit the download button begin who appear in my email and enter the order number and the password, it says no order found. Help please... Urgent

  Chances are th eemail link is a download option once.  After that, you probably need to go to your Adobe account online and look for an option to download it.

  Depending on the version it is, you might be able to find a download link through one of the following links...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Photoshop cc 2015 cannot detect graphics processor, I've updated my Dev amd and intel, but still have the same problem!

  This my problem

  my system info:

  Adobe Photoshop Version: 20151114.r.301 2015.1 2015/11 / 14:23:59:59 CL 1053036 x 64

  Operating system: Windows 64-bit 8.1

  Version: 8.1

  System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading

  Physical processor count: 2

  Number of logical CPUs: 4

  Processor speed: 2494 MHz

  Built-in memory: 4012 MB

  Free memory: 1605 MB

  Memory available to Photoshop: 3256 MB

  Memory used by Photoshop: 70%

  Range of modifier: enabled.

  Space design: disabled.

  Work plans: enabled.

  Multi-frequency 3D printing: disabled.

  HighBeam: disabled.

  Tile image size: 128K

  Image cache level: 4

  Overview of fonts: medium

  TextComposer: Middle Eastern and South Asian

  Display: 1

  Limits of the display: top = 0, left = 0, low = 768, right = 1366

  The drawing OpenGL: disabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: basic

  OpenGL allows Normal Mode: fake.

  OpenGL allows Advanced Mode: fake.

  AIFCoreInitialized = 1

  AIFOGLInitialized = 1

  OGLContextCreated = 1

  NumGLGPUs = 1

  License type: free trial

  Serial number: Trial Version

  Feature::Photoshop / Extended: WE

  Feature::Photoshop/standard: WE

  Feature::Photoshop/trial: WE

  Feature:32 - Bit layers: WE

  Feature::CountTool: WE

  Feature::Acrobat3D: WE

  Feature::measurement: WE

  Feature::MATLAB: WE

  Feature::VanishingPointMeasurement: WE

  Feature::VanishingPoint3DSExport: WE

  Feature::VanishingPointDXFExport: WE

  Feature::DICOM: WE

  Feature::VideoLayers: WE

  Feature::Timeline: WE

  Feature::ExtendedMenuBar: WE

  Feature::3DPrint App: WE

  Feature::ImageStack creation: WE

  Feature::ImageStack edition: WE

  Feature:32 - Bit painting: WE

  Feature::ACRFilterAllowed: WE

  Feature::ACRFilterAvailable: WE

  Feature::ExportAssetsQueueFeature: OFF

  Feature::creative cloud staged: OFF

  Feature::3DMultitonePrinting: OFF

  Feature::artboards: WE

  Feature::Playground: OFF

  Feature::chording range: WE

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015\

  Temporary file path: C:\Users\"User"\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  99.3 G, 47.3 G free starter

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Required\Plug-Ins\ CC

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Plug-ins\ CC

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2015-09-09 at 18:52:48 79,567158 79.567158

  AdbePM.dll PatchMatch 0000-00-00-00: 00:00 1.   1.

  AdobeLinguistic.dll Adobe linguistic Library version 9.0.0

  AdobeOwl.dll Adobe Owl 5.2.9

  AdobePDFL.dll PDFL 2015/09/12-01: 10: 45 79,156620 79.156620

  Adobe AdobePIP.dll 7.3.1.70 product improvement program

  AdobeSVGAGM.dll AdobeSVGAGM 79.566705 79.566705

  AdobeXMP.dll Adobe XMP Core 2015/09/10-01: 10:20 79,158325 79.158325

  AdobeXMPFiles.dll Adobe XMP files 2015/09/10-01: 10:20 79,158325 79.158325

  Adobe XMP Script 2015/09/10-01: 10 AdobeXMPScript.dll: 20 79,158325 79.158325

  adobe_caps.dll Adobe CAPS 9,0,0,28

  AGM.dll AGM 2015-09-09 at 18:52:48 79,567158 79.567158

  ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2

  AIDE.dll HELP-2015/15/10-11: 58:31 79,568000 79.568000

  Amtlib.dll AMTLib (64 Bit) 9.0.0.89BuildVersion: 9.0; Brand: Tuesday, August 25, 2015 07:30:38) 1.000000

  ARE.dll ARE 2015-09-09 at 18:52:48 79,567158 79.567158

  Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390

  AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390

  Bib.dll BIB: 2015-09-09 at 18:52:48 79,567158 79.567158

  BIBUtils.dll BIBUtils: 2015-09-09 at 18:52:48 79,567158 79.567158

  boost_date_time.dll photoshopdva 8.0.0

  boost_signals.dll photoshopdva 8.0.0

  boost_system.dll photoshopdva 8.0.0

  boost_threads.dll photoshopdva 8.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.3.7.33275 2.3.7.33275

  Adobe CITThreading.dll CITThreading 2.3.7.33275 2.3.7.33275

  CoolType.dll CoolType 2015-09-09 at 18:52:48 79,567158 79.567158

  c:\windows\system32\dnssd.dll Hello 3,0,0,2

  dvaaudiodevice.dll photoshopdva 8.0.0

  dvacore.dll photoshopdva 8.0.0

  dvamarshal.dll photoshopdva 8.0.0

  dvamediatypes.dll photoshopdva 8.0.0

  dvametadata.dll photoshopdva 8.0.0

  dvametadataapi.dll photoshopdva 8.0.0

  dvametadataui.dll photoshopdva 8.0.0

  dvaplayer.dll photoshopdva 8.0.0

  dvatransport.dll photoshopdva 8.0.0

  dvaui.dll photoshopdva 8.0.0

  dvaunittesting.dll photoshopdva 8.0.0

  Dynamiclink.dll photoshopdva 8.0.0

  ExtendScript.dll ExtendScript 2015/04/17-16: 55.22 80.1017022 80.1017022

  icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  igestep30.dll IGES 9.3.0.113 drive

  imslib.dll IMSLib DLL 9.0.1.14

  JP2KLib.dll JP2KLib 2015/08/14-01: 13: 58 79,258941 79.258941

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 7.3.1.70

  Manta.dll Manta 1.   1.

  mediacoreif.dll photoshopdva 8.0.0

  MPS.dll MPS 2015/08/14-01: 13: 58 79,566687 79.566687

  pdfsettings.dll Adobe PDFSettings 1.04

  Photoshop.dll Adobe Photoshop CC 2015 16.1

  Adobe Photoshop CC 2015 plugin.dll 16.1

  PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 6.1.0 Standard Adobe

  PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 6.1.0.157

  PSArt.dll Adobe Photoshop CC 2015 16.1

  PSViews.dll Adobe Photoshop CC 2015 16.1

  SCCore.dll ScCore 2015/04/17-16: 55.22 80.1017022 80.1017022

  SVGRE.dll SVGRE 79.566690 79.566690

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 9.0.0.15 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 9.0.0.15

  VulcanControl.dll Vulcan Control Library 5.2.0.35 Application

  VulcanMessage5.dll Vulcan Message Library 5.2.0.35

  WRServices.dll WRServices Friday, July 31, 2015 07:50:10 build 0.21834 0,21834

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 16.1 (2015,1 x 001 003 x)

  Accented edges 16.1

  Adaptive wide-angle 16.1

  Angular Strokes 16.1

  Average 16.1 (2015,1 x 001 003 x)

  Bas-relief 16.1

  BMP 16.1

  Camera Raw 8.0

  Camera Raw Filter 8.0

  Chalk and charcoal 16.1

  16.1 charcoal

  Chrome 16.1

  Cineon 16.1 (2015,1 x 001 003 x)

  Clouds 16.1 (2015,1 x 001 003 x)

  COLLADA 16.1 (2015,1 x 001 003 x)

  Halftone color 16.1

  Color pencil 16.1

  CompuServe GIF 16.1

  Pencil tale 16.1

  Craquelure 16.1

  Crop and straighten Photos 16.1 (2015,1 x 001 003 x)

  Crop and straighten Photos filter 16.1

  Hatch: 16.1

  Crystallize 16.1

  Cutting 16.1

  Features dark 16.1

  Deinterlacing 16.1

  16.1 DICOM

  Difference clouds 16.1 (2015,1 x 001 003 x)

  Glow 16.1

  Move 16.1

  Dry brush 16.1

  Eazel acquire 16.1 (2015,1 x 001 003 x)

  Entropy 16.1 (2015,1 x 001 003 x)

  NO export VERSION color tables

  Extrude 16.1

  FastCore 16.1 routines (2015,1 x 001 003 x)

  16.1 the fibers

  Film Grain 16.1

  Gallery of filters 16.1

  3D Flash 16.1 (2015,1 x 001 003 x)

  Fresco 16.1

  16.1 glass

  Scarlet contours 16.1

  Google Earth 4 16.1 (2015,1 x 001 003 x)

  Grain 16.1

  Graphic pen 16.1

  Halftone Pattern 16.1

  HDRMergeUI 16.1

  HSB/HSL 16.1

  IFF Format 16.1

  IGES 16.1 (2015,1 x 001 003 x)

  Outlines in ink 16.1

  JPEG 2000 16.1

  Flattening coefficient 16.1 (2015,1 x 001 003 x)

  Blur of the lens 16.1

  Correction of the lens 16.1

  Lens Flare 16.1

  Liquefy 16.1

  Operation of Matlab 16.1 (2015,1 x 001 003 x)

  maximum 16.1 (2015,1 x 001 003 x)

  Average 16.1 (2015,1 x 001 003 x)

  Basis of measurement 16.1 (2015,1 x 001 003 x)

  Median 16.1 (2015,1 x 001 003 x)

  Mezzotint 16.1

  Minimum 16.1 (2015,1 x 001 003 x)

  MMXCore Routines 16.1 (2015,1 x 001 003 x)

  Mosaic tiles 16.1

  Multiprocessor support 16.1 (2015,1 x 001 003 x)

  Neon 16.1

  16.1 notes paper

  Color NTSC 16.1 (2015,1 x 001 003 x)

  Ocean Ripple 16.1

  16.1 OpenEXR

  16.1 paint Daubs

  16.1 palette knife

  Patchwork 16.1

  Paths to Illustrator 16.1

  PCX 16.1 (2015,1 x 001 003 x)

  16.1 photocopying

  3D Photoshop 16.1 engine (2015,1 x 001 003 x)

  Photoshop Touch 14.0

  Photo filter package 16.1 (2015,1 x 001 003 x)

  Pinch 16.1

  Pixar 16.1 (2015,1 x 001 003 x)

  Plaster 16.1

  Plastic wrap 16.1

  PLY 16.1 (2015,1 x 001 003 x)

  PNG 16.1

  Pointillism 16.1

  Polar coordinates 16.1

  Portable bitmap 16.1 (2015,1 x 001 003 x)

  Poster edges 16.1

  People's Republic of CHINA 16.1 (2015,1 x 001 003 x)

  Radial blur 16.1

  Radiance 16.1 (2015,1 x 001 003 x)

  16.1 range (2015,1 x 001 003 x)

  Color research grid NO VERSION rendering

  Crosslinking 16.1

  16.1 the ripple

  Rough Pastels 16.1

  Save for Web 16.1

  ScriptingSupport 16.1

  Shake Reduction 16.1

  16.1 shear

  Asymmetry 16.1 (2015,1 x 001 003 x)

  Smart Blur 16.1

  Smudge Stick 16.1

  Solarize 16.1 (2015,1 x 001 003 x)

  16.1 spaces

  Splash 16.1

  16.1 spherize

  Sponge 16.1

  Sprayed strokes 16.1

  Stained glass 16.1

  Stamp 16.1

  SD 16.1 (2015,1 x 001 003 x)

  STL 16.1 (2015,1 x 001 003 x)

  Sumi-e 16.1

  Summons 16.1 (2015,1 x 001 003 x)

  16.1 Targa

  Texture veneer 16.1

  16.1 tiles

  Torn edges 16.1

  16.1 twirl watch

  U3D 16.1 (2015,1 x 001 003 x)

  Draft of 16.1

  Vanishing Point 16.1

  Variance 16.1 (2015,1 x 001 003 x)

  Virtual Reality Modeling Language. VRML 16.1 (2015,1 x 001 003 x)

  Water paper 16.1

  Watercolor of 16.1

  16.1 Wave

  Wavefront | OBJ 16.1 (2015,1 x 001 003 x)

  WIA support 16.1 (2015,1 x 001 003 x)

  Wind 16.1

  Wireless Bitmap 16.1 (2015,1 x 001 003 x)

  Zig - zag 16.1

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Extensions:

  Recent files 1.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC

  2.1.24 libraries

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\index.html CC

  Beginning 1.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC

  Adobe 6.1.0 color themes

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC

  Export as 2.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  Overview of the appliance 1.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSPanel\panel.html CC

  Share on Behance 3.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.behance.shareonbehance.html\index.html CC

  com.adobe.preview.Loader 1.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSLoader\loader.html CC

  Export as 2.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  Install TWAIN devices: NONE

  first I want to thank sarsaxen for his concern to help.

  I lost hope of resolving this problem and went to set up the old amd driver, so I not unhooked the driver amd first and by chance I opened photoshop just it detects intel driver!

  Then I installed the latest driver amd again and re open photoshop, it detects the driver amd.

  I hope this can work with you webscultord83535506 try this solution!

  

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Vista updates suddenly stopped working and the message appears to me to be the victim of pirated software - error: 0x80070426

  Message came that said my copy of Vista can be victim of piracy and go online to validate that, I did it because I have been using this OS for more than 3 years on a Toshiba laptop with Windows Vista Home Premium 32-bit p2000 series. a few hours later my computer said it needed to restart and once it restarted it has a black screen with a message that he was trying to repair. It could not be repaired so he asked if ok to go to a restore point and clicked on Yes. I get the message that my copy is not genuine and my computer wants to restart once again, but I'm the delay of four hours. I did the command line to try to restart the service and access has been denied. 0x80070426. I found an ad on the forum and tried the steps there, but he failed. Mistake was 54. http://social.Microsoft.com/forums/en-us/genuinevista/thread/de089d6e-63b4-4D6E-b955-30bb8e9525d3. I had to contact support and have been waiting for more than 24 hours for assistance. My Control Panel opens and goes away, but I could remove tweetdeck which is among the most recent installations of software I did before this all happened. I am also running xampp on my desktop and I tried to put in place a virtual host by using a different port - could not get that to work and changed the host to the original file. Could it be the problem? I hope I did not reinstall my OS and destroy my computer :-(I also ran Microsofts diagnostic tool and write it here:

  Diagnostic report (1.9.0006.1):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0
  Validation code online: 0x80070426
  Cached Validation code: n/a, hr = 0x80070426
  Windows product key: *-* - JQMWD - 2QJRJ-RJ34F
  The Windows Product Key hash: R8gPTEFMoOygFewoq/uOoWMpz68 =
  Windows product ID: 89578-OEM-7332157-00237
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6001.2.00010300.1.0.003
  ID: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6001.vistasp1_gdr.090302 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  WGATray.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E57BD23E-724F-49E7-ACE4-57DC9E2AB49E}1.9.0006.16.0.6001.2.00010300.1.0.003x 32*-*-*-*-RJ34F89578-OEM-7332157-002372S-1-5-21-3871005671-4011101567-1094615180TOSHIBASatellite P205DTOSHIBAV1.0020070814000000.000000 + 00081333507018400FE04090409Time(GMT-08:00) Standard Pacific03TOSCPLTOSCPL00100100Microsoft Office home and Student 2007126B5697EF2510F1AMwy5C4A7Uv VTGRBwWVjHvNqHks plus 81602-909-4685496-68058 1

  Content Spsys.log: 0 x 80070002

  License data-->
  Software Licensing service is not working.

  --> HWID data
  Current HWID hash: NgAAAAEABAABAAEAAQABAAAAAwABAAEA6GGqskaeSvGGg5CmuJF0htam8vSSKt4YXv6sVniq

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP TOSCPL herring
  HPET PTLTD HPETTBL
  MCFG MCFG PTLTD
  TCPA TOSCPL
  SLIC TOSCPL TOSCPL00
  SSDT PTLTD POWERNOW
  ASF!               DMA AMDTBL

  Thanks for any help!

  ebflute

  Hello Ebflute,

  I suggest that you perform a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• Update of Adobe Flash and the player crashes.

  Original title:

  Update of Adobe Flash and Reader

  Hello

  Recently I tried to update my Adobe flash and reader. I get through all parts of it, but when it comes to the part of screen download simply of freezes and does not complete the download. Is there some bugs in the last editions or do something else?

  Hi Tom,

  Sorry for the late reply.

  If you are still having this problem and have followed all of the suggestions provided by Andre Da Costa replied on July 5, 2014, then contact Adobe support for further assistance.

  Reference:

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-errors-freezes-reader-Windows.html

• Updated to 4.3 and D600 NAVE still does not

  I've updated to 4.3 today and I was still unable to import my D600 NEF/RAW files.  After I updated, I restarted and it seemed that I could actually import the NAVE D600 files.  However moments later, somehow these images were no longer in my library/catalog and when I try to re-import them he says once again the files are not compatible and no preview was available in the import screen.  Any thoughts?

  Win 7, 64 bit

  When you import these files from? They are already on your hard drive? If they are on your hard drive, how you transfer? If it's an older version of Nikon Transfer that could be your problem.

• privious page arrow and the box for websites with dropdown disappeared fom my opening page

  my opening page counts Yahoo search with any of the other boxes. I can't go back to the previous page or find a web site without going through the main site through Yahoo search. I thought it was a problem with Yahoo (it's my opening page), but they say it's Firefox.

  Make sure that you are not running Firefox mode full screen with all the hidden toolbars.

  • Press F11 to toggle mode full screen (file/Firefox > fullscreen)

  If the menu bar is hidden, then press the F10 key or hold down the Alt key, which should make the convening of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

  See also:

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing