Updated to windows 8.1 by the secure store of windows to 2013.10.17 or not?

Similar Questions

• just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  I have just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

  Just fixed this problem for me:

  Open the file/Program files (x 86).

  Search: vcredist_x64.exe

  3 results popped up for me. I ran all three and it fixed the problem for me. Hope this works for you as well.

• Windows Update continues to download and install the security patch

  Fix security, KB2538242 continues to be downloaded and installed. History of the update is not the list of people, but made of add/remove programs. Patch has been since 23 / 04/11 to 07.11/11. Ran online antivirus, Malware scans, complete scandisk at startup scans yet still suggests. Finally hid the security fix but, don't know if I would have. I / E 9 was also installed but not compatible bavec scanners online. Had to withdraw and return to I / E 8.

  Hi Barbara,

  You can check if the following is useful.

  Method 1: You can restore the hidden update and check to see if the following Help article.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Method 2: You can follow this article to the problem of Internet Explorer 9 that you have faced.

  Some sites Web may not behave as expected in Internet Explorer

• I can't turn on the automatic updates give me a message that the Security Center could not change the Automatic Updates settings. Please help me...

  Automatic updates not turn off why, I already scanned my computer for viruses and found nothing, I have already install service Pack 3 and did not work. I turn on manually but when I go on the center of Panel and the security of the control still appears off the coast.

  Maybe try the Microsoft Fix It solution found on this page http://support.microsoft.com/kb/971058

• error message: automatic updates of Windows to 0 x 80070424 does not illuminate

  Automatic updates of Windows won't turn on. I get the error code. : 0 x 80070424

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  07/05 / 1101:31:04

• Update for Windows vista 64-bit service is not running. I tried to restart. How to start or load update service? I explorer 8.

  Explorer 8

  I have Nortorn 360 installed and running.

  Windows Vista 64-bit

  So far the service is not running. I tried to restart, Fix.

  I deleted the update log I saw another thread, the fix o.

  Hello

  1 did you changes to the computer prior to this problem?
  2. you receive an error message?
  3. what solution did you try?
  4. What are the troubleshooting steps you have tried?
   
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can try to temporarily disable anti-virus installed on your computer and check.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 3:
  You can see the following link.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  For more information about how to back up and restore the registry, follow the steps from the following link:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  It will be useful.

• I can't download Windows updates or updates of Windows Defender, and my BITS will not start.

  Hi, I have a HP Pavilion dv4 Notebook PC, and I can't get my updates of windows to download anything. My BITS will not start.

  -Processor: Intel (r) Core (TM) 2 Duo CPU
  At 2.10 GHz, 2.10 GHz T6500
  -Memory (RAM): 4.00 GB
  -System type: 64-bit operating system
  -Windows Vista Home Premium Edition
  -Service Pack 2

  I have Webroot AntiVirus with Spy Sweeper and I recently downloaded the Malewarebytes Malware Anti.

  Whenever I try to download an update for anything, be it Itunes, Windows Defender, Windows updates, updates to HP or Microsoft Updates, they do not always arrive.

  When I go into the service menu & try to start BITS it comes up with this message:

  Windows cannot start the Service on the Local computer's Background Intelligent Transfer
  Error 126: The specified module is not found.

  When the updates of Windows fails to download updates, it comes up with the error Code: 80246008.

  I tried to download on microsoft.com BITS Repair tool, but it is said that the tool is not necessary.

  I really need someone to help me and to understand this point for me, it's happened now for about 3 months. When I bought the laptop I had Webroot AntiVirus with Spy Sweeper installed, and I just installed Malwarebytes' Anti Malware, a week ago.

  Anyway, do the following:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  5 test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updated to Windows 8... now can not find wireless network

  I've updated from windows vista to windows 8. Everything went well, but now the computer can not find wifi connection while it worked before the upgrade. Any ideas what's past? Or what I can do to find l ' internet and connect?

  Thank you.

  This 'upgrade' is really not much more than a NEW installation of the operating system.

  Did you visit the manufacturer's web page a computer for your computer model - more precisely their downloads and drivers for your system model - the article and enter all drivers of Windows 8/8.1 available to them for your if everything goes well supported by said manufacturer under Windows 8/8.1 computer system?  (This is a manual process.  Microsoft/Windows doesn't make or can't stand most (if any) of the hardware components inside your computer.  You must obtain and install these drivers yourself.

  The motherboard chipset.

  Hard drive controller.

  Video.

  Audio.

  Network.

  etc.

• I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

  I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?

  Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

• Find files on the data store that have been removed from inventory, but not deleted from the disk

  I have ESXi 4.1 and with vSphere Client to manage virtual machines.

  Some of my users continue to use the 'remove from inventory"rather than the option" remove disc "in vSphere when they want to delete the virtual machine.

  This leaves the computer virtual on the data store but not used. I have since removed this privilege among the offending users but I need to do a bit of cleaning.

  I have a lot of files on the data store where users have done this in recent years. Probably about 150 records but only 80 VM listed in the inventory.

  Is there a way I can output, a report showing the data of each machine store directory in inventory so that I can remove anything not on this list? ID rather not to manually check the parameters of all 80 VM in the inventory.

  Out ideal would be something like:

  MyVmNameHere 1, \MyVmDirectoryHere1\ [DataStore1]

  MyVmNameHere2, \MyVmDirectoryHere2\ [DataStore1]

  A great tool to discover all this and much more is RVTools

  André

• Cancellation of the assignment and reassign the data store by using different LUNS that datastore has not appeared.

  Hi all

  I have a data store after vdisk1 I have not assigned the vdisk to data store and reread the esxserver, the data store has disappeared.

  Again, I assigned the vdisk using the same number of logical unit as before and reread the esxserver, datastore appeared again return.

  But if I use a different assignment vdisk lun and on a new analysis of data store does not appear.

  Can someone tell me if the LUN must be even to see the store of data back again.

  If so why. ?

  Is there a vmware documentation to substantiate this claim.

  concerning

  Neela

  What do you mean by vdisk1?  The data store are stored as metadata on the LUN, when is formatted VMFS.  If you remove the LUN the VMFS is sitting on, then Yes, the data store will disappear.  If you only remove the vmdk who lives on this data store, then no, the data store must remain as it is, and you should be able to move the vmdk on the data store as needed.

  -KjB

  VMware vExpert

• After the automatic update of Windows 7 - Manager of tasks does not work

  Automatic update has occurred.  Now the Task Manager does not come with window with tabs upward.  Only a window with two columns ('Mission' and 'Status') and three option buttons ("end task", go to "and new task" ").  Even not a 'close button' - may not only close to the taskbar.

  Hi rw9683,

  ·         Have updates you installed?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2: Follow the steps in the article.

  Using the Task Manager: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/using-Task-Manager-frequently-asked-questions

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• After that update of windows 64 bit system Firefox does not start

  I've updated to IE 10 and it should be updated to complete. My preference is Firefox, but it does not start and produces an error box telling me that Firefox could not start, it also sends you a report of failure.
  It happened in a previous windows update and to reolve that I go back to an earlier era. I don't want to do that this time, I want to use 10 IE and Firefox. If you are unable to solve this I have to use IE 10, it is so much faster now.

  Yes thanks - please start firefox in safe mode (by pressing the shift key, while it launches) and go to firefox > options > advanced > general & disable hardware acceleration.

  for some information about this, you can also look at bug #812683

• Update for Windows Server 2012 R2 (KB2885698) is not available for download

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=40403 this download link does not provide a file for Windows Server, but only for Windows 8 RT MSU. I want to thank the ability to have more than one KMS key on the host, and without this update, it is not possible. Y at - it someone who can replace it for the MSU file?

  There is no way how to contact Microsoft through their support, because the page of 'cat' crash always :-(

  Thank you

  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• A few days ago got new updates of windows since then some software will not work as an assistant to hp

  When I star my computer my icons are more big hp assistant will not work and receive the same updates on and also I can't update mirosoft silverlite says my software is up to date, but I am also told as with silverlite is not there when it is in my programs when I look at

  stuwart,

  Your have the blues of the update, so here's a tool to heal if all goes well.

  This tool is being offered because an inconsistency was found in the store Windows Service that may prevent the installation of future updates, service packs, and software.