Updated vmware view a vsphere e 5.0 has 5.0... doubt successivi

Similar Questions

• VMware View and vSphere/ESX4

  I never tested with VMware View in any installation ESX so please forgive my ignorance on the subject.

  What I've read, I know that VMware View is not currently supported under vSphere but it should be later in the year.

  My question is: is it possible to run VMware View in vSphere/ESX4 and y at - it not crash you have experienced? I have a few clients who want to start a project with the product, but I'm tired to sell it to them without knowing if it is possible to run in vSphere or not.

  As I understand it, VMware View is just a series of virtual machines (View Manager for the management) and several other virtual machines for delivery of operating system invited to end users, so I think its possible to run, just not supported.

  Can anyone shed some light on this for me? Thank you.

  jjohnston1127 wrote:

  Thanks for the reply.

  Exactly how desktop computers are delivered to the end user? They give you a connection with the VI Client to vCenter and displays the available machines, they control?

  Display Client, Thin Client or View Portal (browser). Basically, we use RDP as the main Protocol for now (PCoverIP is the slate and many talked of the future Protocol). In simple terms, us tie in with the AD. The user connects by using one of the methods mentioned. The broker for connections check the user/pass, see what desktop computers - if any - they have right to and presents this list to the user. The user selects and then, if the SSO is enabled, records in their office environment. They have several desktop computers and screens (up to 4) if necessary.

  When the view is supported for vSphere and released, you know / think it will be difficult to migrate from individual offices shared through the clones related, or computers is - same not possible?

  God I hope not. For now, I have no idea, but I imagine they would create some sort of upgrade. View Manager is nothing else than a web application.

  I'm sure I think other issues later, but I can review the product documentation to answer most of them. I wanted to just grab a little better quickly because I have an appointment in an hour or two with a client

  Documentation has made a huge difference and give you a better idea of how this works.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• What version of VMware View is compatible with vSphere 5.1?

  Greetings,

  I checked the compatibility tables and I watched that indicated that no version of VMware View was compatible with vSphere 5.1.

  Tom

  You will have to wait until VMware releases a hotfix or an update that is compatible with vSphere 5.1. Usually short gap between the release of vSphere and a compatible version of the view.

  André

• VMWare View on VMware vSphere Hypervisor

  Hello

  VMWare View can run on VMware vSphere Hypervisor (free version)?

  As written, you have vCenter Server and vCenter does not free ESXi...

  There are only two solutions:

  • buy a package of vSphere with vCenter and view ESXi AND the licensing module
  • buy full them see packages that also include the part of vSphere

• vSphere Hypervisor w / VMware View

  Hello

  Is it possible to install VMware View on free ESXi installation? I have not installed ESXi yet because I'm still trying to understand what solution is better suited to my needs.

  I'm running it out of my basement and I'm not running an AD network but you can install it if necessary. I have about 40 developers to work wanting to virtual windows XP and windows 7 VPD (is that the correct term for virtual offices) for unrelated work software testing. I believe that the number of developers will double or triple possibly spreading by word of mouth in my office. I bought a new Beefy server to run these MeV on. My original plan was to use ESXI and remote desktop, but I read in VMware View and this sounds like it is made for what I'm trying to do, but I'm not even sure I can get seen working on the free esxi. My experience of VMware consists of VMWare Workstation, so this is a big step upwards. Because these virtual desktops must be always sure I know that view is even interesting to use for this. What do you guys suggest?

  Hey Warbuy,

  You don't need a vCenter Server and AD domain to see if technically free version came out. However, when the display is allowed, the license includes "vSphere for desktops", which includes hypervisor ESX\i and vCenter Server. Its vSphere actually Enterprise more you download providing you only run view components, servers, vCenter, offices etc. related connections. So contribution you will eventually purchase licenses you will be covered. On the otherhand, if you are going to only operate during the tests (60 days), you can obtain a license from vCenter server of the trial such as previously mentioned, this will be good also.

  Hope this helps?

• VMware View 4.6 and vSphere Client performance

  Hello world

  I prepare a demo for VMware View 4.6, a small, with internal disks (3 x 600 GB, 6 GB/s SAS, 10 k RPM RAID 5), network: 100 MB (it was never a problem demos), within IBM x 3650 M3, 32 GB of RAM, 2 x xeon 4 c E5620 2.4 GHz.

  There are 3 virtual machines of Windows 2008 R2 (4 GB RAM and 20 GB disks) and 6 virtual desktops (2 GB RAM) and 30 GB drive XP

  In 10 k RPM there is 150 IOPS / s, so 3 drives x 150 = 450 IOPS / s-> 450 / 9 mV = 50 IOPS / s p/vm. I know that if IOPSp/vm is over 30, it's good, so this seems like a good script.

  I don't know what should I look to find the cause of poor performance.

  VI Client is really slow, and worse even desktop computers.

  Can you guide me to find the problem please?

  Thank you!

  Your latency of storage time seems a bit high, how the store looks like it? Possible alignment issues?

  You have a lot of CPU resources, I'd give workstations an another vCPU.

  Linjo

• VMware View 6.1 Zero-Client disconnect

  We have recently updated our platform VDI of VMWare View 6.1 using vSphere 6.0 and Nvidia vGPU (K1 grid). (HP T310 ZeroClient 4.7.1)

  Some of our users complain disconnects, some users have this error more than others.

  The mouse stops and a disconnect after 30 seconds.

  Here are a few journal entries:

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: = > new connection request < =.

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_address in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:42:41.131 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_port in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:42:41.131 > LVL:2 RC: 0 AGENT: customer address is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: for gentle host: using Version 1 Tag

  25/03/2015, 08:42:41.132 > LVL:2 RC: PRI 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} for gentle host ID of Session: Tag: "W/AenY + In + UA" value: 5bf01e9d8f889fe5

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: server_listen_on_addr is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:42:41.132 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: type = 2

  25/03/2015, 08:42:41.132 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} ID of Session = 4; Codec = 2.

  25/03/2015, 08:42:41.132 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: backtrace Journal 1

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: {s_tag:0x5bf01e9d8f889fe5} pcoip_server_win32 launch

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: path to the logfile {s_tag:0x5bf01e9d8f889fe5} optional specified as "C:\ProgramData\VMware\VDM\logs\".

  25/03/2015, 08:42:41.133 > LVL:2 RC: AGENT 0: tera_agent_launch_server: {s_tag:0x5bf01e9d8f889fe5} use_vmware_launcher = true.

  25/03/2015, 08:42:41.135 > LVL:2 RC: AGENT 0: create_session_process: open pcoip server process handle 00000000000003DC

  25/03/2015, 08:42:41.135 > LVL:2 RC: AGENT 0: tera_agent_launch_server: code {s_tag:0x5bf01e9d8f889fe5} Launcher using VMWare: worked [system is vista or newer, windows session id: 0 x 1, pid: 0x1e4, handful of proc: 0x3dc].

  25/03/2015, 08:42:41.381 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 00 00 00 00, len = 144

  25/03/2015, 08:42:42.135 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] waiting for ready message.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] Got ready message.

  25/03/2015, 08:42:42.236 > LVL:2 RC: 0 AGENT: selected server_addr is 0.0.0.0:4172 (order of the host)

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] to connect to the mailbox on the server.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending the session tag.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 136 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #0 key ='pcoip.enable_tera2800 "value =" 1 ".

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 48 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #1 key ='pcoip.priority_level "value =" 4 ".

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} bytes 47

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending session option #2 key = 'pcoip.server_fqdn' value ='PS-VDI-01. PROJECTSERVE.local'.

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 71 bytes

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] end of options: sending message null-option

  25/03/2015, 08:42:42.236 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 26 bytes

  25/03/2015, 08:42:42.362 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 05 00 00 00, len = 136

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] session to add to the list.

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] the number of active sessions = 1

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] sending ok connection response.

  25/03/2015, 08:42:42.388 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x5bf01e9d8f889fe5} [4] connection_response (end), 0

  25/03/2015, 08:42:42.580 > LVL:2 RC: AGENT 0: sSERVER_SESSION::agent_receiver_callback: A:srvr4 message; B:srvr0004 to A:srvr4, message = 0 b 00 00 00, len = 16

  25/03/2015, 08:42:42.602 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} MBX_CON_COMPLETE

  25/03/2015, 08:42:42.602 > LVL:2 RC: AGENT 0: monitor_soft_hosts: connection_complete {s_tag:0x5bf01e9d8f889fe5}: SOFT - MBX_CON_COMPLETE

  25/03/2015, 08:42:43.645 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} thread of control: connection_complete (MBX_CON_COMPLETE) callback is successful

  25/03/2015, 08:42:43.646 > LVL:2 RC: AGENT 0: mb_send_acknowledgement: {s_tag:0x5bf01e9d8f889fe5} send ACK.

  25/03/2015, 08:42:43.646 > LVL:2 RC: AGENT 0: sSERVER_SESSION::send_message: {s_tag:0x5bf01e9d8f889fe5} 8 bytes

  25/03/2015, 08:42:43.748 > LVL:2 RC: AGENT 0: mb_send_acknowledgement: {s_tag:0x5bf01e9d8f889fe5} srvr0004 Succeeded

  25/03/2015, 08:52:46.565 > LVL:2 RC: AGENT 0: monitor_soft_hosts: {s_tag:0x5bf01e9d8f889fe5} server is dead.

  25/03/2015, 08:52:46.666 > LVL:2 RC: 0 AGENT: tera_agent_disconnect [guest]: close the agent code: 6, disconnect reason: 0

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_disconnect: {s_tag:0x5bf01e9d8f889fe5} sign out is * NOT * pending (hndl: 4 pid: process handle 484,: 000003dc)

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_disconnect: {s_tag:0x5bf01e9d8f889fe5} server process already stopped (hndl: 4 pid: process handle 484,: 000003dc)

  25/03/2015, 08:52:46.666 > LVL:2 RC: AGENT 0: tera_agent_finish_disconnect_thread: connection_closed 6

  25/03/2015, 08:52:46.939 > LVL:2 RC: AGENT 0: sSERVER_SESSION: ~ sSERVER_SESSION: {s_tag:0x5bf01e9d8f889fe5} closing pcoip server process handle 00000000000003DC

  25/03/2015, 08:53:01.517 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: = > new connection request < =.

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_address in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: tera_agent_read_external_udp_address: RegQueryValueEx couldn't find the value of pcoip.external_udp_port in the Software\Policies\Teradici\PCoIP\pcoip_admin_defaults key, sending no value to the server.

  25/03/2015, 08:53:01.518 > LVL:2 RC: 0 AGENT: customer address is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: for gentle host: using Version 1 Tag

  25/03/2015, 08:53:01.518 > LVL:2 RC: PRI 0: pcoip_agent_connect_req: {s_tag:0x3c5d2733bc4b5aa} for gentle host ID of Session: Tag: "A8XSczvEtaoA" value: 03c5d2733bc4b5aa

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: server_listen_on_addr is 0.0.0.0:0 (order of the host)

  25/03/2015, 08:53:01.518 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: type = 2

  25/03/2015, 08:53:01.518 > LVL:2 RC: AGENT 0: pcoip_agent_connect_req: {s_tag:0x3c5d2733bc4b5aa} ID of Session = 5; Codec = 2.

  25/03/2015, 08:53:01.518 > LVL:1 RC: AGENT 0: pcoip_agent_connect_req: backtrace Journal 1

  New Windows driver is GA and the ESX pilot remained the same so, fortunately, only an update of the Windows driver.

  Link is here.

  NVIDIA DRIVERS NVIDIA GRID VGPU SOFTWARE VERSION 346.68/348.27 WHQL

• ESX 4.1 &amp; Vmware View 5.0

  Hi, I install Vmware View 5.0 on ESX 4.1?

  Thank you too much.

  View 5 can be used in conjunction with the last update for vSphere 4.1.   I will also move this on VMware View forum.

• Requires ESX VMware view?

  Hey guys,.

  This may be a very stupid question, but do you need ESX(I) to run VMware View?
  I guess you need to create a cluster of some sort to host virtual offices and
  I wonder if ESX (i) comes into play at all. Try to determine the future needs of license here.

  See you soon

  Yes, VMware view must either ESX or ESX (i) to install and also a Virtual Center to be configured and cluster to build with the ESX hosts, added to the cluster.

  With regard to the requirement for Vmware View 4.5 Lincense

  VMware View is always available in editions company and first and can be purchased as a package or as an add-on for those who have existing vSphere licenses to a separate purchase (which is not part of a set of view). With view 4.5, customers have a way to upgrade available to view Enterprise and View first modules to complete sets. Key updates include:

  • See Business Starter Kit and View Prime Starter Kit now includes VMware vCenter Standard for desktop computers (updated VMware vCenter Foundation for desktop computers).
  • View first beams, View first add-ons and View first upgrades include now the two new components introduced with view 4.5: vShield Endpoint and View Client with Local Mode(formerly known as Offline Desktop)

  You can get more information about the licenses and prices here

  http://KB. VMware.com/kb/1027460

  Thank you

  Buddy.

• ThinPro with VMware View USB Redirection

  Hi all:

  I'm trying to configure my workstation (t620 ThinPro 5.1 running) to start required services necessary for USB with VMware View forwarding at startup.  I tried to add the command to /etc/rc.local and created my own init.d script, but none of these options automatically launch services.  Run manually /etc/rc.local and the custom init.d script launches the services successfully.

  Has someone managed to get the necessary USB redirection services running at the start?  Any guidance is appreciated.

  Thank you.

  Solved my problem... changed under USB Manager Remote Protocol of VMware View.  Updated this setting caused VMware services to run at startup.

• How to fix VMware View Server certificate revocation check connection error?

  Dear community,

  For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

  The view admin console shows the following for servers connection:

  The server certificate is not approved.

  The server certificate cannot be verified.

  For the vCenter, he said (that I have validated manually the certificate):

  No problems found.

  Certificate is not approved, but the thumbprint of the certificate is accepted.

  With the connection series on 'full', States that the login server logs for the vCenter server:

  TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

  As far as I can see there no similar entries for login server certificates in the newspaper.

  At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

  I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

  However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

  In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

  For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

  Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

  I appreciate the thoughts and responses! Thank you!

  Best regards

  Fabian

  Dear community,

  During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

  1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:
     1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
     2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
     3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
  2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
  3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
  4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
  5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

  So what will no doubt help in similar cases:

  • Reinstall the servers of connection one by one, including:
  • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
  • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
  • Reinstall/Update OS (may not be necessary, but I did not test that)
  • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

  My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

• VCSA 6.0u1 (updated 6.0 VCSA) vSphere Web Client error

  

  After that I upgraded my VCSA 6.0 to 6.0u1, I can't connect to the Web Client vSphere.

  How upgrade from 5.x and 6.x VCSA to VCSA 6.0 Update 1? virtuallyGhetto

  Clock animation Flash Adobe turn for a few moments, then it gives the error in the attached screenshot. «There is an internal error occurred - Index '0' specified is out of range.» It happens in IE10 and Chrome.

  It is a standalone PSC and I can connect to the device management https:// < vcsa >: 5480 and apparently in good health. Can I deploy a new VCSA from scratch, but it would be nice if I could fix it.

  Any suggestion would be appreciated!

  And if the clearing the cache of the web browser does not solve your problem, try to delete the database of serenity:

  To delete the files in the VMware vSphere Client Web serenity database:

  1. Stop the vSphere WebClient service. For more information, see stopping, starting, or you restart the services of VMware vCenter Server (1003895) and the stop, start, or restart services from VMware vCenter Server 6.0 (2109881).
  2. To delete the files in the database of serenity, type these commands:

     For Windows vCenter Server 5.x:

     Use File Explorer to delete the content of C:\programdata\vmware\vSphere Web Client\SerenityDB\serenity
     For Windows vCenter Server 6.0.x:

     Use File Explorer to delete the content of C:\programdata\vmware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity

     For the VMware vCenter Server Appliance 5.x:

     Type this command when logged in as root with a shell of the console or SSH session:

     rm - rf/etc/vmware-vsphere-client/SerenityDB/serenity / *.

     For the VMware vCenter Server Appliance 6.0.x:

     Type this command when logged in as root with a shell of the console or SSH session:

     rm - rf/storage/vsphere-client/SerenityDB/serenity / *.

  3. Restart the vSphere WebClient service. For more information, see stopping, starting, or you restart the services of VMware vCenter Server (1003895) and the stop, start, or restart services from VMware vCenter Server 6.0 (2109881).

  Source: VMware KB: The VMware vSphere Client Web reports an internal error 1009

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• Is it possible to remove the disposable disc to a pool configuration in VMware View?

  I would like to remove the option of disposable disc several persistent pools in VMware View Horizon 5.3.1 (where virtual machines are already using disposable disks); However, there doesn't seem to be a way to do this in the options of the pool. Is it possible to remove the disk otherwise option or should I remove the old pool and create a completely new without this option enabled?

  I used disposable disk option seems to be to save storage space, but I discovered that disposable disks have been updated only when displaying launched a turning off the virtual machines in the pool (which never happens). I thought that disposable records updated each time that a client shutdown/restarted the VM... but which is not the case. Given this information, I would like to stop using disposable disks as they really may not confer any advantage the way our persistent virtual machines are configured.

  Thanks in advance for any help!

  OK, you're right... only the drive letter customization is allowed.

  Now to answer your question, the one and only formally is to remove the pool by archiving all disks persistent (user data disk), and then create a pool with the same name (but without SDS).

  In addition, select all the archived UDD and then click on, "recreate". All new desktop computers will be recreated with the new spec,

  Another way (not officially committed / not sure of its effects)

  EAP-SVIVmPersistentDiskSpec entry will be there to ADAM OR = database server groups (VMware KB: connecting to the Database View ADAM)

  This entry will be there for disposable system that has a parameter "DiskUsage is SystemDisposable".

  Upron deleting the corresponding entry * may * end configuring don't not the SSD for the supply of others.