Updated Windows huge problem?

Similar Questions

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Updates Windows 7 problem

  As of October 11, 2016, my Windows 7 Pro (64 bit) is not an update of Windows. Just spend 24-plus hours of updates. How to fix?

  Issue edited by the moderator to add clarity.* *.

  Windows 7 update problems? First read this.

  :)

• Update Windows 8 problem "error Code 8024402F".

  I bought a laptop with preinstalled windows activated two days ago 8 os (unilingual). I wanted to upgrade to 8.1 windows requiring that certain essential 8 windows update (as specified in the windows store), so I tried to search the windows update. The system is configured to install updates automatically. My network connection is OK and does not install additional software on my new laptop. However, I am facing problem, whenever I try to update my windows and the following error report is displayed:

  Windows could not search for new updates

  There was a problem of updates

  Error: Code 8024402F Windows update has encountered a problem

  Final check of updates: never

  Updates have been installed: never

  I tried troubleshooting, but it didn't help also. Please, let me know if additional information is required.

  Hi Anirban,

  If you receive the Windows Update updates 8024402f error, it may be due to the interruption of the connection between your computer and the Windows Update servers.

  Kindly, follow the troubleshooting of these links and check if that helps.

  How to solve the problems of connection with Windows Update

  http://Windows.Microsoft.com/en-CA/Windows-8/how-solve-connection-problems-Windows-Update

  Run the Fixit of this article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941/en-us

  You can also refer to the suggestion of John R and John Rubdy in the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_update/Windows-update-fails-with-error-8024402f-on/207a2621-0f3f-4EAA-918D-22dd47cee9db

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/problem-with-checking-Windows-updatesError-code/9d37e12b-6501-41cd-b26e-81a4be708e6d

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Update Windows (VISTA) problems :(

  Salvation during the installation of the updates of windows on my laptop, the power was cut to the configuraion now when I start laptop it just hangs at startup screen saying 3 3 config 0% complete then continuous itslf repeatadly I tried to restart restart in safe mode and tried to fix the system, but still puts me on the same screen:(delesde idées s'il vous plaît Merci roy)

  Hi, just found this solution and it has worked well for me

  :I used the following solution.
  Restart the computer. Press f8, then choose the computer restore option.
  Choose the open command.
  type: Guest winsxs (press enter)
  type: move C:\windows\winsxs\pending.xml text.xml (press enter)
  type: exit and then restart the computer.
  Computer should work again

  http://www.ANGUAS.com/?p=47

• Update windows E520 problem

  I bought an E520 a couple days ago and I tried to run windows update but in vain. There always fail and return to the original status when I start the laptop. What can I do? Help, please!

  Welcome to the community.

  you are probaby dealing with the known Microsoft issue described in this article to community knowledge base:

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/Windows-updates-not-installing-system-config-l...

  Basically, install only KB2647753 and reboot if necessary. run then all the other updates you need. they must pass.

  Please let us know if it works for you.

  Kind regards.

• Updated Windows 7 not work & Service record is missing or damaged

  Windows 7 Home Premium 64 bit - IE 11

  AV of Norton 360, v 22.7.0.76

  15 July: Windows 7 64-bit KB3161608: FAILURE

  15 July: Windows 7 64-bit KB3161608: FAILURE

  July 16: Windows 7 64-bit KB3161608: FAILURE

  16 July: MS Office 2010 32-bit KB2881030: FAILURE

  16 July: run Windows Update Troubleshooter:

  Problems encountered:

  Registration for the service is missing or damaged: DO NOT FIXED

  Windows update error 0 x 8007005(2016-07-16-T-11_22_48A): DO NOT FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Problems installing the recent updates: FIXED

  Especially do not show in history as installed.

  Several updates installed successfully on 18 June.  "Since running convenience store States ' control last updated: never" and updates have been installed: never.

  However, the history of the update is still present.  (From memory I think the last control was July 12.

  I think that there is a "silverlight" update which probably do not instal.

  Of Norton report that shows ' 14 July installed Adobe Flash Player 22 Active load 32-bit X' - do not appear in the history of the update?

  'Services' - status shows several 'start' but nothing running at all.

  Not sure what is relevant.  I am a silver surfer & sadly not computer illiterate.  A "RESTORE POINT" to June 18 would have a good effect?

  Thanks for any help

  I suspect that Norton might be part of the question, and if you were to perform an Internet search on something like:

  the failure of the Norton windows update

  You will see more than a million results with these words:

  

  Granted there are problems with Windows Update, because for several months but if your updates are downloading and just do not install I would suspect Norton - because in their community of support online, there are so many reports of problems and many, many debates and ideas for things to try that can work sometimes maybe (sometimes they work) , adjustments for Norton, the reinstall from scratch... it is very messy.

  In their community, they discuss especially Norton vs. Windows updates and you tell your update Adobe and Trusteer OK but those who use a different method to update that updates Windows, the problem could be JUST with Windows updates.

  Unless you are forced to use Norton for a reason, you should consider at least temporarily uninstall, then reboot your system without it and see what things look like.  You can always install it again later, no?

  You must be sure to use their custom tool to be sure that the uninstall is clean:

  https://support.Norton.com/SP/en/us/home/current/solutions/v60392881_EndUserProfile_en_us

  Some people dislike not so much of Norton (and the problems that come with it) they believe Norton its own type of computer infection and malware.  I would never recommend or install it, but your mileage may vary.

  Remember to replace Norton with something like Microsoft Security Essentials, which has a much smaller footprint, and you can download the low low price of free:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your system will give you better performance.

  As mentioned hit Windows Update for a long time too, but you can probably fix that part.

• After the last update Windows 10 - Z30 Satellite screen problem - has

  Hello

  After updating Windows 10 (threshold/1115) one of our Z30 - A sometimes wakes up after hibernation with the screen off. The only solution is to turn it off by holding the power and then turning it back on, button which is obviously annoying because open files may be lost or corrupted. The other Z30 - A that you don't show the behavior of sound.

  Someone at - it ideas? I would really appreciate the pointers.

  Thank you very much!

  Kind regards!

  Sounds like a driver problem.

  go to control panel and uninstall different drivers (sound, display, wireless, etc.), then let Windows update install the latest versions.

• Satellite 2410: Updates of Windows XP problem - it hangs after reboot

  Hello! I am a computer engineer and I never face a problem like this before.

  I install a new HD to the model 2410-601, after the installation of the restore CD and the conversion to NTFS I installed SP2. Now... after the computer start some automatic updates and ask for a reboot. When it restarts the computer will not fully start and stop at Midway to the windows xp logo... I checked updates of drivers of toshiba for a bios update. And the latest version was a 2002 V1.40. 2002 the last of them? in 4 years toshiba took the trouble to update a bios version?

  I even changed the RAM, because I though that might be the problem.
  I update SP2 from windows update and still does not. I formatted the machine 5 times already.

  Can anyone help?

  P. S.
  Excuse my English

  Hello

  Above all the BIOS update has nothing to do with a Microsoft SP2.
  You should know as a computer engineer.
  My laptop is about 6 years old and I've never updated a BIOS. It works well with all Microsoft OS.

  However; did you check Microsoft Windows XP SP2 update information?
  On the Toshiba driver download page, you will find this document or use this link:
  http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

• Problem updating Windows on Hp EliteBook 8560w - HP ProtectTools Security Manager 8.1

  When I ' try to update Windows 8 Preview of Windows 8.1 on a laptop HP EliteBook 8560w, I ' am getting this error message: "before upgrade you to Windows 8.1 Preview, uninstall these apps: HP ProtectTools Security manager, HP WebCam.

  Hp ProtectTools 8.0.2.1341 Security Manager is installed with the password manager and Credential Manager.

  Someone had this problem and fixed it yet?

  Thank ' s!

  Hello!
  Thanks for posting in the HP support forum!

  8.1 Microsoft Windows (although very good and big update ) is still in BETA (testing) phase and is not officially supported.

  Windows has features upgrade analysis and that it has detected that HP ProtectTools are not (yet) compatible with the new operating system (new update) - still in test.

  Note that this OS is still in beta and may contain bugs. In addition, he brings a few changes that any other 3rd party suppliers must take into account and it will take a while until the program is compatible.

  I recommend - if you want to test the new operating system, install fresh on another computer to test (processing Edition), not a production machine. Otherwise, for your laptops of business - use only the final versions of the software (such as Windows 7 SP1 or Windows 8).

  Let me know if I can help you further!

  IT_WinSec

  Please, take into consideration my location (Europe) and time zones. I'll try to give the answer as soon as possible.

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Update WIndows 7 Office 2007 problems

  I am usng Windows 7 Ultimate and Office 2007 Enterprise, and whenever I try to install updates for Office 2007, I get "WindowsUpdate_00000646" "WindowsUpdate_dt000"
  Also, when I try to update manually, I get 'and not the expected version '.
  Any help would be welcome

  Hello

  References to Vista also apply to Windows 7.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky