Updates Windows (maybe more updates I need?

Similar Questions

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• New update for Win 7 32 - bit XP - Windows Update will not, so have to do manual updates - that need me?

  I updated from XP to 7 Edition Home Premium in mid-March and have tried since then to run Windows Update, but I get the ubiquitous endless "check updates". I spent hours trying all of the fixes I could find (and understand) with no luck. So I decided to just manually download at least the critical updates, but I have no idea of what updates I need. I have Service Pack 1 and my system is 32-bit. I have 13 updates installed that I downloaded and installed in March because they seemed like it might be useful (I don't remember what most of them were for the moment), but I stopped here because I really didn't know what I was doing, or what I needed and I went back to try to fix Windows Update , but I gave that up. So, does anyone have a list of updates I should keep Windows 7 works correctly? Or should I say to hell with it and download Windows 10? I know my time is short if this is my best option. Any thoughts, advice, ideas, help welcome.

  It is not too hard to do. The value of the automatic updates to "never check updates" and then restart Windows. Download and install KB3020369 and KB3161608.

  https://support.Microsoft.com/en-us/KB/3020369

  https://support.Microsoft.com/en-us/KB/3161608

  Then, use Windows update again.

  Best regards, VZ

• I bought the wrong update, I need a Mac Version but ordered a Windows Version. What can I do?

  I bought the wrong update, I need a Mac Version but ordered a Windows Version. What can I do?

  I did exactly the same thing and contacted their customer service on the live chat. It took about an hour before someone was available, but he did return to normal and they also send me a box version that allows the two platforms at the same price. They just canceled my purchase of Windows, placed a Mac purchase on their system, sent me a new serial number and published records canned.

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• to make the pc to automatically update, I need to install sp3, but this isn't acceptting help yoh pls

  to make the pc to automatically update, I need to install sp3, but this isn't acceptting help yoh pls

  What do you mean by not accepting?

  Follow my tips on how to get SP3 here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/problm-with-update-0x80244019/d1ec3a13-2351-4C57-966D-f6e68d1e3475

  Tricky

• I have an old computer use more, but I need to get some documents, but I don't remember the username to connect to windows

  I have an old computer use more, but I need to get some documents but I don't remember the username to connect to windows and there is no index. How can I connect

  Hi joedoerksen,

  Follow these methods.

  Method 1: Start the computer in safe mode. Built-in Administrator account would be displayed on the Welcome screen. Choose the account administrator and you should be able to boot to the desktop, if you have not set a password for the default Administrator account.

  Method 2: If you have set a password for the default Administrator account, then the only option is to go for a parallel installation of Windows XP and retrieve documents.

  Follow the method 4 install Windows XP to a new folder (parallel installation) of the article.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Method 3: Follow the steps in the article.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  See the article on the Microsoft Policy on lost or forgotten passwords.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Double click does not open my files more, instead I need to select open in a popup window. can anyone help? I use windows XP

  Double click does not open my files more, instead I need to select open in a popup window.  can anyone help? I use windows XP

  This could be due to your double-click speed, look on your control panel and go to the mouse. There will be a tab for with double click on set your speed to what you want and test on it fake file.

  Hope this helped,
  James

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have the version of Lightroom 6 buy. I uninstalled and reinstalled. But now I can't update. Need me always to Adobe Creative cloud, which I did not. How can I do?

  I have the version of Lightroom 6 buy. I uninstalled and reinstalled. But now I can't update. Need me always to Adobe Creative cloud, which I did not. How can I do?

  At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

  I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code of 64 C. Please tell me what to do?

  I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to install the updates manually from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• Cannot open Windows 7 more.

  After a bombardment of automatic updates, I can't open Windows 7 more.

  Every time I get my password the message appears:

  "The service user profile Service has no logon.

  Unable to load the user profile.

  Nothing else has happened.

  The program seems to recognize the password, because a bad entry receives as response a red disk with a

  x in it.

  Hello

  Please contact Microsoft Community.

  I suggest you for this visit provided Microsoft article below.
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
   
  http://support.Microsoft.com/kb/947215
   
  Also I suggest you to activate the administrator account by default on your computer from WinRE and see if the problem is resolved.
   
  You must have the Windows 7 DVD, start the computer to Win from the elevated command prompt, you can follow these steps:
   
  (1) use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).
  (2) in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the appropriate language to install, time and
  currency format and keyboard or input method options and then click Next.
  (3) click on repair your computer.
  4) click 7 installation you want to repair, and then click Next.
  5) click on command prompt.
  At the command prompt, type the following command and press ENTER:
  lusrmgr.msc in the online search and press enter
  NOTE: This file is located in C:\Windows\System32\lusrmgr.msc
  1. open the User Manager and local groups.
  2. in the left pane, click the users folder.
  3. in the middle pane, right click Administrator, and then click Properties.
  4. to activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  5. to deactivate the account administrator of Buit-in-
  (a) check the account is disabled box.
  6. click on OK.
  7. close the windows local users and groups.
  8. close the session, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.
   
  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.
   
  Now of the foregoing provided steps that you need to check if you are able to solve the problem, if you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and check the question below.
   
  Create a new user profile.
   
  You must create a new user account and check the question of do you need to follow the steps below.
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Look for the question, for additional on this issue references, you can consult the forum link provided below.
   
  IF you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Where the client vSphere for Windows 8? You will need to download it / can not find or opt out.

  Ladies and gentlemen, I have the book Fast Track of VMware vSphere. Flight 1. On page 40, it clearly states "the vSphere client can be installed quickly and easily in the VMware vCenter Setup Wizard. The vSphere client runs on a specific list of windows operating systems. The same page is an image showing the button «Download vSphere» customer What page IS NOT DOING is telling where I'm going to download it. I went to VMware and tried to locate the client vSphere for Windows 8 (as we suppose to download the correct version of the client, and I have windows 8, though, there is no "vSphere client for Windows 8," unless I'm blind.) Can someone please tell where is the client vSphere for Windows 8? If there is no such thing as the client vSpehere for windows 8, including vSphere client needs to be downloaded? Looking for vsphere client 5.1, I came up with this: this is a update 2, what the plain vSphere 5.1 for windows 8? Modules and VMware vSphere VMware vCenter Server 5.1 update 2 it is a update 2, what about the plain vSphere 5.1 for windows 8? VMware vCenter Server 5.1 update 2014-01-2 16 is for customer web (I don't want the web client) VMware View pilot & VMware vSphere 5.1 Internet Client SDK tools this is for customer web (I don't want the web client) is Internet Client SDK 2012-11-19 the VMware vSphere 5.1 for a 1 has updated that you say the plain vSphere 5.1 for windows 8 VMware vSphere with modules and operations management VMware vCenter Server 5.1 update 1 has is for a 1 to update, how about plain 5.1 for windows 8 VMware vCenter Server 5.1 vSphere update 1 to 2013-05-22 okay maybe she is, but she's not saying windows 8 VMware View VMware vCenter Server 5.1.0a and modules , it is get 5.1.0a Server (I need to the plain vSphere 5.1 for windows 8) VMware vCenter Server 5.1.0a 2012-11-19: this is an another update 1 b and for the cloud, how about plain vSphere 5.1 for windows 8 VMware vCloud Suite VMware vCenter Server 5.1 updated 1 b and modules, it is an another update 1 b How about plain vSphere 5.1 for windows 8? VMware vCenter Server 5.1 updated 1 b 2013-08-01, which is the suite of Cloud (I need the plain vSphere 5.1 for windows 8) VMware vCloud Suite VMware vCenter Server 5.1 update modules and 1 c it is an update 1.c. Before you download this, I need the plain vSphere 5.1 for windows 8 VMware vCenter Server 5.1 Update 1 c 2013-10-17, it is for modules etc. etc. etc. VMware vCenter Server 5.1.0b 2012-12-20 Horizon DaaS VMware vCenter Server 5.1.0b VMware modules VMware vCenter Server 5.1.0b 2012-12-20 VMware Horizon DaaS VMware vCenter Server 5.1.0b and modules of VMware vCenter Server and cloud suite VMware vCloud Suite VMware vCenter Server 5.1.0b 5.1.0b 2012-12-20 VMware View VMware ESXi Installable VMware ESXi Installable 25 5.1 5.1 - 10 - 2012 while downloading the plain vSphere 5.1 for windows 8? Thank you.

  Hi friend

  Here are the simple steps:

  1. in fact, it comes with beam VC itself. When you install VC, on the first page itself you will find.

  2. Another way is: open your browser: type this address: "https://", you will get a page where the download link is available for the VI client. Download and install.

  Note: I haven't read your full post, but I guess, you're looking for it. You have another customer Web option IE too delivered with beam of VC.

• If you have firewall and windows defender, do you really need another security software?

  If you have firewall and windows defender, do you really need another security software?

  I have no other security software

  Norton internet security becomes awkward

  Peter

  Hello

  Yes you still need an antivirus program and you are right that Norton tends to cause problems.

  Norton Removal Tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  You want to remove Norton and old and even uninstalled antivirus can leave remnants then download and run
  the Norton Removal Tool. Also, I would get Avast and Prevx and you should be in good shape.

  Download the 3 to get back to after removing the McAfee antivirus.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each.

  --------------------------------------------------------

  Here is what I use:

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html
  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.