Updating the BIOS with the anti-theft protection

Hi all. I want 6-1113tx and I just knew that my BIOS is not updated so I tried to update, but it says it cannot be updated because your device is protected against theft or something, how do I disable it for a while to update my BIOS?

Words exactly: '' available, unavailable ''?

If it's the story of LoJack, I would suggest LoJack assistance. Their support numbers are available on the link from my previous post.

Tags: Notebooks

Similar Questions

  • BlackBerry wiped Classic classic without going through the anti theft email and password

    Hello

    I have a classic phone backberry preowned, I erased all the data when the phone I restarted TPG a logon message required (anti-theft protection) and I don't know the previous use of my phone and I need to unlock it.

    I have the box and all the mobile accessores appreciate your help to unlock my device

    Thank you

    Hello and welcome to the community!

    You are in a difficult situation... see BBs official information about it here:

    If you purchased your appliance from ShopBlackBerry, Amazon (U.S. / UK) or the Porsche Design Store, please communicate with BlackBerry using the details on our page contact us.

    Contact us blackBerry > http://blck.by/1MxtqPR

    If you bought your device with a wireless service provider, or a retail store in person, or online, please contact them for assistance.

    When you contact your point of sale, please have the following prepared;

    DO NOT PUBLISH THIS INFORMATION IN THESE FORUMS

    -Your BlackBerry ID
    -Proof of purchase such as a reception
    -A copy of your wireless bill that shows your phone #.
    -A copy of your ID issued by the Government

    There is no way for the end user to change the BBID combined on the device without having the existing credentials BBID. The seller you was not properly preparing the device for transfer of ownership and my humble opinion is the responsible party here. Please contact them... If they represented the device as being usable by anyone, then they have distorted it and should refund you.

    Good luck!

  • BlackBerry Passport BB as a new phone on the rise and glued on the anti-theft function

    Hello

    I've been a faithful customer BB for 10 years and recently bought a refurbed unlocked Blackberry Passport on e - bay.

    I started to set up the phone, and once I got the Blackberry ID user name connection, my connection was not accepted as Blackberry Protect anti-theft is activated.

    While I tried to contact the previous owner (pending response), I try to find out if there is a way around this section of the introduction.

    I have 3 numbers and all phones blackberry - Q5, Q10 and now BB passport. They are so easy to use and convenient that I really want to get the implementation completed on this phone as soon as POSSIBLE, because it will be used for work purposes.

    Is there a way someone could help?

    Thanks in advance.

    jpcprocha

    Hello and welcome to the community!

    There is no way to move forward without these credentials. Theft protection is a very strong security feature and cannot be bypassed.

    You must get these credentials, complete the initial Setup with the credentials and throw then a WIPE on the device, again enter these credentials. After the WIPE, you'll then be able to use/create a new BBID during initial installation.

    If the seller will not provide you with the credentials, their next option would be for you to return the unit to them and to the steps above, except for the last part (for example, they should start CLEANING with their powers, but does not start the device upwards later), and then they send it back to you.

    The last option is so... If the seller has represented the device as being fully usable by you, and if they either of the above, then they distorted the device for you and should refund you. If they do not cooperate, use the functions of "Buyer Protection" eBay.

    Good luck!

  • I put the anti-virus protection of zone alarm on my computer by mistake how can I get rid of it please

    I can't remove my e mails since I put on the anti-virus mistakenly area alarm is there any way to take my computer I already alvira protection

    Go to your control panel and remove it by using Add/Remove programs or... If you use Windows 7 (since you did not provide the details, go to programs and features, highlight it and select uninstall.

    I hope this helps.

  • Update unsuccessful BIOS with M3100/M5100

    I intend to upgrade proseccor AMD Athlon 64 4000 + my Aspire and map graphic.

    I read that AMD Phenom X 4 9500 would probaply the best option. Before ordering proseccor I tried to update my bios R02-B1 without success. Installation of BIOS has informed "program file part number does not match your system.

    My PC is labeled and purchased as M3100 but BIOS says it's M5100 (I think that this conflct is due to the major warranty on this PC repair)

    Then info from the BIOS:

    Aspire M5100

    MB S/N 04PJ75018889

    Principal ID Board F690GVM

    SM BIOS Version 2.4

    System BIOS Version 6.00 P6

    System BIOS ID R01 - A3

    Version of the BIOS date 10/10/2007

    Thank for all succestions.

    When you update your Bios, you must stay with like kind. If A then stay with an if B stay B and L with L... I think that is the problem and looking at the page for your updates to the Bios, it looks like yours is better then what is listed.

    Hope this helps some

    James

  • I've updated my bios with lenovo update... then it could not start

    I have a 3000 n200 0769 b5g... I just updated the bios, then he could not start... What is the solution... is this a format? then I tried to format my pc but I didn't coz he has a 8 GB freespace only when I use my bootable drive... it must have 140 GB... where can I get a good start and I can burn it to a cd...

    Failed to start o? You mean it restarts when it comes to where windows should start up (you get a blue screen), if this is the case, go into the BIOS, and then search for the HARD drive mode (AHCI I think), if the mode is on, turn it off, it should work fine after that.

    If it's a different kind of problem starting, I don't know...

  • Satellite L850-147 - updated the BIOS but what?

    Hello

    has obtained a PSKDLE L850-147. TEMPRO soft want me to install a new bios.
    Sweet gas station tells me there is nothing to update. (In the past, I've already updated my bios with Service Station)

    Who should I believe?

    In General, you can trust these two tools pre-installed.
    > In the past, I've already updated my bios with Service Station
    This means that you already have the latest version of the BIOS? Have you checked the BIOS Toshiba download page if a newer version is available - http://www.toshiba.eu/innovation/download_bios.jsp

    In any case, if the system works you do not need to change anything.

  • easy laptop subsequently disabled once W7 has been summer install before the anti-viru programme is

    Hello

    I find one thing to force my laptop seen very easy subsequently disabled once W7 has been been install before anti-viru program to be installed/Switched on. This look at W7 has confick with HP or setting which is the case. I need help to solve this problem before I could really complete the installion on it; As soon as possible, that school has started again.

    Thank you, everyone

    Tomme

    Here is the unlock code

    44174288

    Tomme wrote:

    Hi Erico,

    Here's the disabled code: 51216648.

    My information mobile as follows: -.

    HP CQ41-209TX with series i3 processor with 4 GB of ram 500 G SATA HARD drive with the sound card of 4450 m ATI;

    Production WH937PA #ABG No.

    It cames with W7 Home, and I upgraded this W7 Ultimate.

    You think I have do not need to set up the number of security BIOS for up-graded/install pin essential security software?  I used to set up switching on and setting security at all times little BIOS identification number when it is offline or online, in case of virus attacks happening. Is it OK like this? Set a password for the BIOS is a bit on the top and not really necessary.  It isn't like a smartphone that you take with you everywhere you go. I have a configuration PIN to my Samsung Galaxy phone for this s4. I can also track the phone and reset it remotely if it is stolen. You can actually use software like ESET SmartSuite 6 internet protection for your laptop that has the remote control anti-theft protection. I don't use this feature on my personal books. I can follow them on Google maps, if they are stolen and then lock them remotely.

    Please state the problem, thanks.

    Tomme

     

  • BlackBerry BB Q10 anti thieft protection Q10

    I bought a used BB Q10, original box witch, manual etc, but there BB protect, so I couldn't remove data and use the main BB ID. I want to unlock the phone, but I don't remember the last owner email (I had the phone for write10 times the wrong password reset). Please answer or tell me where I have to write with this problem. Sorry for the typos, but I don't know English.

    Here is the link to the article of BlackBerry on the protection against theft.

    http://support.BlackBerry.com/kb/articleDetail?articleNumber=000036737&language=English

    Your best solution is to get the BBID in the use of the former owner. Before you turn off the anti-theft and wipe the device set up with your own BBID.

    If your were the original owner it would be a chance to get the help of point of sale, but you say your purchased second hand device. Thus, you must obtain the BBID running on the device of the user who set up the unit.

    Otherwise, see http://www.basics.net/2016/04/19/blackberry-10-remove-anti-theft-protection-from-device/

    Warnings, that method is not supported or endorsed by BlackBerry. I have not done. I've seen some reports by users that it worked for them. I saw other reports saying that it does not work. It is at your own risk.

    Yet once, your best solution be would get the BBID to the original user, if you can.

  • Intel anti-theft on X 220

    Hi all

    I have a brand new X 220 i7 I really like - and I would like to keep to myself! :-)

    It is equipped with Intel Anti theft and I want to activate it.  As far as I understand, it takes some service provider to activate and this provider will keep track of the device and a pill 'kill' if I have to send the application.

    I contacted Lenovo to the Denmark, but they gave me a link to a company that provide some protection software.

    Does anyone know any Intel anti-fournisseur of flight in Denmark/Europe services?

    / Henrik - Denmark


  • Why my system does not update my bios?

    "I tried to update my bios from the last two days, but when I start Update say: part number of the file does not match your system" I don't know why I get this error I update my bios with the latest version (1.5). Here is my system information:

    Microsoft Windows 7 Ultimate - 6.1.7600 Build 7600
    System model: MG-63MI-7109
    System type: X 86-based PC
    Motherboard: XFX nforce 630i/GeForce 7100 Socket 775
    The version of the BIOS/Date: American Megatrends Inc. V1.2, 23/04/2008
    SMBIOS Version: 2.5
    BIOS iam trying to install is V1.5 and I n, don't know why it gives an error by updating it.

    The BIOS & their updates are specific to the brand of PC card parent & model.  You will need to contact your PC/motherboard manufacturer to solve this problem.

  • Regarding Intel Anti - Theft Activation

    Hello

    I am the proud owner of UltraBook 4-1046TX HP Envy.

    I want to just activate the anti-theft Intel Technology. Everyone is to have an idea, please let me know.

    Processor Intel Anti theft Techology supports.

    Hello

    I think that it is true, UNLESS you have all documents to support your application. It is a technology, you want to use you need to buy or subscribe to it, you may have to pay annual fees too. I normally pay my property insurance, I don't trust anti-theft.

    Good luck.

  • Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

    Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

    Following message appears first

    BIOS version: Worm. current 3.40-> update version 3.70
    THIS Version: worm. current 1.30-> update version 1.50
    BIOS and THIS should be updated

    During BIOS update seems following message:

    + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

    My settings:
    -BitLocker is turned off.
    -No connection to a docking station
    -Windows 7 is installed
    -Boot mode is enabled? I guess that means:
    "Close all open programs, shut down windows and then turns off your computer."

    Any idea what is the problem?

    Post edited by: ML

    Hi ML

    Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
    Have you noticed a few issues or hardware issues?

  • Update the BIOS - protected A600 problem

    I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

    I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

    Help, please!

    Hi wilreb...

    I think that the user henharas a bad experience with the BIOS updates.
    I updated the BIOS many times and never had any problems...

    I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

    If your laptop is running properly, then update the BIOS is not really necessary...
    You must follow these tips; never change a running system ;)

    In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

    Check it out...

  • After the last update of BIOS that Satellite P100 locks with BSOD

    Hello

    Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

    I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

    Microsoft advised me to reduce the video acceleration for video adjustment.
    Maybe can someone explain to me why I have this problem?
    I use the same drivers and software same as in the second update
    I can find BIOS previous to rewrite again, because this one works very well with my laptop?

    Thank you!

    Hi Sebasian

    I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

    As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

    If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.

Maybe you are looking for

  • Satellite A30-514: no driver USB

    Hello, first post here so be gentle please... Just re-formatted your laptop Satellite of friends as he managed to corrupt the windows, but we have not formatted to a non-original disc so no drivers etc - my problem is the USB driver. I'm using this l

  • Why iTunes putting same artist several times?

    Recently, I added a song iTunes (from soundcloud) and edited metadata to add the name of the artist. He appeared as a separate iTunes tab even if it was the same artist name? Then, I removed the name of all the songs and their renamed by the same art

  • error "device could not be calibrated" to PXI-5105

    Hello I want to calibrate my PXI-5105. But I get an error in MAX and a calibration vi. I tried to install NO-SCOPE 4.1.3 on PXI, but that does not solve the problem. I have labview time real 13.0.1 installed. I enclose the error messages. See you soo

  • on RAM

    I buy laptop Hp pavilion 15-n047tx with DDR3 RAM, 2 GB, 800 MHZ. Can I upgrade the RAM with DDR3, 4 GB 1600 MHZ frequency.it is possible, or I am facing a problem

  • Error code backup Windows Vista 0x8100000A

    My backups using an external hard drive at the beginning very well & then once far enough into the backup I get 0x8100000A error code. This error has mounted several times during the backup.  Before that, I ran & got the error code 0 x 80070002. I re