upgarded clone hard drive won't validate

Similar Questions

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• How to clone hard drive in a new ssd

  Looking to clone a Crucial SSD before removing the original internal HD.  What is the most effective way to clone and what equipment is required?

  You will need an external enclosure to put it and plug it in and you can use Carbon Copy Cloner to clone. It's free for 30 days. It is advisable to change the internal connecting cable while you have the HARD drive on but until you fit the SSD.

• 320 external USB HARD drive won't boot

  Hello!
  After working fine for 5 months, my disk 320 external HARD USB is now showing that it is not initialized. When I go to disk management and click to initialize it, it won't boot. Can someone tell me how to make this work? I'm sure I'll have to format too, but can't find any way to make that without initializing the HARD drive first.
  Any help would be appreciated.

  Hello

  Try removing the USB ports in Device Manager. After restarting again the USB ports should be recognised again.
  Then again connecting the external HARD drive.

  The second possibility is to use an external USB hub with an additional power supply.
  It is possible that the HARD drive needs more energy than the 500mA

• A 17 in the hard drive won't go in a 15-the macbook pro

  A 17 in the hard drive goes in a 15 to the macbook pro? both are about 6 to 7 years of age.

  There are two main sizes of the reader:

  Rated 3.5 "drives for desktop computers

  Nominal 2.5 "drives for laptops. Long ago, he must also worry about the thickness, but not for these two models.

• Tecra M7 - new hard drive won't let me re-enrolll my fingerprints

  I just got the laptop back to the shop today, where they made all these repairs including replacing my old HDD (80gig) towards a new (160 GB). I'm ecstatic that it is fluid, but as I started to change the user to the old name of the screen, put in my new password for locking up, I went to re-register my finger prints.

  He seemed to be very well at first until I tried to slide my fingers. each finger, he says, you cannot save this finger as it is already registered.

  And I'm sitting there, thinking, how is this possible? It's a brand new hard drive. So I tried to just swipe my finger normally and he says there are no fingers enrolled, you wish to register now? Then. I'm just a little confused...

  Perhaps the old HDD would be copied to the new.
  However, you can try to reinstall the software of fingerprint you can find on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Check it!

• My external hard drive won't format properly

  Hello

  Since I installed Capitan I noticed that my HARD drive was doing strange things, maybe he is not related to this and it's just broken. But I decided to format it, because Time Machine doesn't work either then I thought it was the right decision. I think I erased it all Terminal, and now the drive will not be installed.

  Now, I really don't know what to do, I post all the photos that I can then perhaps you know what my problem is...

  Thanks in advance.

  The drive is faulty, or there is another failure to communicate with him. If the drive has its own power use and verify that it works correctly. Try another USB port and cable. Try a hub powered or bypassing the hub, if applicable. Check that the USB ports and cable (s) are operational. If you have no reason to conclude that a defect, the only remaining possibility is a faulty hard drive.

• Second HARD drive won't wake from sleep

  I have Windows XP on my desktop, and I have installed and formatted a second HDD that I use for storage. The HARD disk that came with the computer is 60 GB, and I put in a second Western Digital 160 GB HARD disc. If I put my computer to sleep and then wake him up the next day, my second HDD is not detected. If I restart the computer, all hard drives are detected. I have their cable select with the original (containing the operating system) in a position to master drive and the storage disk in position slave on cable.

  This has something to do with how long there newest larger capacity disk at startup? Is there something to do here - like how long Windows waits before everything starts up and Windows decides that my second HDD is not there? Is there something I need to refresh when my computer starts from sleep so that he could detect my hard drives? If this has to do with one of the power management options?

  Thanks for your comments.

  Hi Anna,.

  From my experience you will need to set the jumpers for their proper functioning.

  I think update the chipset drivers could be a good step in this problem.

  Sometimes older versions of security software or firewall software may misinterpret information from devices that require resources returning from a suspended state. Sometimes, this is interpreted as attacks of different types, because of the level or type of access requested by the device.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• clone hard drive to external memory now cannot open the external file "corrupted" States how can I get it

  Tried to make the backup file all data on my hard drive for external memory with a capacity of 450 G. Message said two blocks of data on hard drive... now I can't open the external memory... file States corrupt... a way to overcome this obstacle and recover the data that was on the external drive until I tried the back-up... r must I clean the external drive? o

  Hello

  Method 1:

  Right-click on the external hard drive in Windows Explorer, click Explore, see if you can recover the files.

   

  Method 2: Check the hard drive for errors.

  Reference:

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows vista completely crushed hard drive won't start after installing the packs of services and internet explorer 9

  Thought I did my brother a favor so that he was at work and installed service Pack 1 & 2 on its 32-bit vista operating system, and then installed internet explorer 9 and it crashed the entire operating system nothing work, hard drive, monitor, mouse nothing. I hope this isn't a hardware problem which needs the advice of experts, the guilty feeling like I had left him only someone help with this can not start even to the bone g .thanks

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• clone hard drive and graphics downgraded. not activate

  I am planning to build a newer computer, so I lowered my current camera hard drive cloning a smaller drive with Acronis. then I installed the smaller disk of my current camera.  Then I went down the graphics card because I want to use on the next machine I intend on creating.  Everything started fine. Then.  half an hour later, a message "you must reactivate" came.  It would not automatically activate so I used automatic telephone activation suggested.  After putting in all the characters, he asked how many licenses, I used this product.  I said three, because I had used the third license on this machine before. I have a family pack.

  Apparently, it's the wrong answer. He wants a new license.  It's the same machine with the same motherboard and I do not see why I had to buy a license, just because I changed some hardware.

  By the way.  Just in case you're wondering, I reformatted the drive, I took off this machine and will use a new license key once this computer is completed.  So, what should I do to continue using the current license on this unit?

  Looks like you used the automation system, you should speak with a representative directly:

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Direct activation number: (888) 725-1047

  1-800-936-5700

• CR.2 files from external hard drive won't open.  Said «you are not allowed to open the doc...» "But I can open the .psd of the same post HD files.

  I connected an external hard drive that I used with my iMac in my new Macbook Pro.  Many of these images cr.2 will be not open.  I see the icon rather than the tile.  The message that appears indicates «you are not allowed to open the document...» CR2. "All of my .psd seem to be visible.  What should I do?  Thank you.

  It seems that there is a problem with the files on the external hard drive, even the mac os is not able to copy the files from the external hard drive.

• clone hard drive

  Hello.

  I want to back up a former under OSX Tiger 10.4.11 G5 power. I can't use DiskUtil I want to clone the same partition that the operating system is running from. I can't use Time Machine, which requires at least OS x 10.5. I can't use CCC or Super Duper as advised forwards messages that asked the same question as the Tiger-compatible versions out no more. The computer cannot be connected to the internet and I do not have the original Tiger installation DVD.

  What would be the best way to back up the computer? Could I do that starting from a Linux install DVD with partition wizard? Are there alternatives better? I want to just clone and throw away the computer.

  Kind regards

  Baptist

  If you're throwing the computer why not just remove the drive?

  Time Machine is not a clone.

  Why do you need to clone? The main purpose of a clone is to have a bootable copy. What should you?  If this isn't the case, then just copy the files in the finder.

• Clone hard drives with raid 1 Server

  I have T110 server with raid 1 and need to put larger in discs.  Do I need acronis or with raid one can I just jump frog records.  Can I put in larger disk in drive Bay leave disc copy 0 second ot new bigger disk and then Exchange disk 1 in drive 0 and put a new another drive in the Bay from 2nd.

  Does absolutely not the way. If it's a Soft raid then

  You can put larger discs in 1 at a time and you'll have to do this TWICE.

  Then rebuild the raid of critcal return to normal.

  Then you can extend the partition of the free space.

  If it's a hardware raid, you must create a new container on the discs and clone dvd or USB bootable from a USB that can contain all the data and.

• Hard drive won't read is more disks from film to digital

  Original title: when you insert a movie digital copy disc in my pc to read is more, I don't know if I could have accidentally deleted the software, someone at - it ideas?

  Use my computer to download say digital copy movie, but one day it stopped reading the disc.  I don't know if I accidentally deleted the program that reads the disk, someone at - it ideas?

  Hello

  1. is the issue limited on digital film discs?

  You try to insert another CD in the CD/DVD drive and check if it is detected. You also try to insert the CD/DVD that is not detected on your computer, on another computer that runs Windows XP and see if the same problem still occurs.

  Please provide more information on the issue so that we can better help you.

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060