Hard drive won't read is more disks from film to digital

Original title: when you insert a movie digital copy disc in my pc to read is more, I don't know if I could have accidentally deleted the software, someone at - it ideas?

Use my computer to download say digital copy movie, but one day it stopped reading the disc.  I don't know if I accidentally deleted the program that reads the disk, someone at - it ideas?

Advertisement

Hello

1. is the issue limited on digital film discs?

You try to insert another CD in the CD/DVD drive and check if it is detected. You also try to insert the CD/DVD that is not detected on your computer, on another computer that runs Windows XP and see if the same problem still occurs.

Please provide more information on the issue so that we can better help you.

You can try the troubleshooting provided in the link below steps to fix the problem.

Your CD or DVD drive is missing or is not recognized by Windows or other programs

http://support.Microsoft.com/kb/314060

Tags: Windows

Similar Questions

  • M30X bios does not detect the hard drive, won't start HD

    Can someone help me in this problem.

    My satellite m30x hard drive won't boot, rather trying to boot from the network.

    Tried to load the installer by default, and Hd will not appear on the settings

    tried original reistal toshiba software CD and the message that no target disk appears

    Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

    Thanks in advance for some light on this problem

    My M30x has the same problem. I just used 2 months.

    I sent it to the repair center as I was told to do, because it has guaranteed.

    I'm still waiting for a response from them. I don't know what caused it.

  • I had to replace my hard drive and I only have a disk of windows XP Prof. Update My installation aborts because she wants is a full version. What should I do

    I had to replace my hard drive and I only have a disk of windows XP Prof. Update  My installation aborts because she wants is a full version.  What should I do

    You will need to borrow an installation disc to a former operating system Microsoft - Windows 95, 98 or me. There is no way around it. If person don't you know is an older drive, you can borrow for a few minutes, you will need, you will need to either buy a copy full XP or take the unit to a local computer professional to do the XP installation for you. MS - MVP - Elephant Boy computers - don't panic!

  • How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

    How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

    See this support article:

    http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  • 320 external USB HARD drive won't boot

    Hello!
    After working fine for 5 months, my disk 320 external HARD USB is now showing that it is not initialized. When I go to disk management and click to initialize it, it won't boot. Can someone tell me how to make this work? I'm sure I'll have to format too, but can't find any way to make that without initializing the HARD drive first.
    Any help would be appreciated.

    Hello

    Try removing the USB ports in Device Manager. After restarting again the USB ports should be recognised again.
    Then again connecting the external HARD drive.

    The second possibility is to use an external USB hub with an additional power supply.
    It is possible that the HARD drive needs more energy than the 500mA

  • My hard drive will not read discs! What should I do?

    My laptop will not recognise discs I put in the forest of cd! I am trying to install Microsoft Office, and it will not even read the disc! Are there other ways of installing Microsoft Office? Or any suggestions how I can get the t hard drive work?

    Thank you

    Any comments would be much appreciated!

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • Satellite A215-S7437 hard drive don't read do not

    Whenever I put a CD in my CD drive, I heard the "rurr" that usually accompanies the normal sound of the hard drive working group work.

    But lately, it makes this noise, but does not read the CD at all either. I searched the download and support already - suggestions?

    I tried searching the base drivers / default on the driver download page, but they don't have em = / and restore the disc definitely out of the question since "broken" car

    Hmmm. Entendez_ you the ODD (CD/DVD drive) is not able to read disks from different manufacturers; CD (+ R R + RW - RW) or DVD (+ R R, + RW - RW)?

    If Yes, then the CD/DVD drive failure would be possible!
    If this is the case, then you will need to replace the CD/DVD drive

    If your warranty is valid, I recommend you contact the ASP in your country to help others

  • How to restore vista OPS hard drive external bitlocker encrypted after main disk failure

    I am running Vista Ultimate and my main hard drive is encrypted by Bitlocker.  I use the backup utility in Vista for backup of that my drive hard main set on a USB attached hard drive which is also encrypted by Bitlocker.  In a case of failure of the primary hard drive and installing a new hard drive, how can I restore my main hard drive (the new drive) to the USB attached bitlocker encrypted external hard? My vista ultimate OPS has been upgraded to the origin of vista home premium and so I did not have the ultimate Setup DVD disk.  I have the disk of vista Home premium.

    Create a recovery disk that the restoration of the backup complete on this topic option (including family Vista drive premium will be not because this option is only available on the Enterprise and Ultimate versions)-should not do anything on bitlocker on it (which will take care of itself during the restore process unless you configure to use a flash drive for protection - then the flash player is also required {but) not a recovery disk different}).  You can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (including backup complete PC Restore).  Be sure to get the drive to boot correctly - there are several ways to make records and this requires a way for it to work (but those that are included in the manual or on the website).

    For more information, here's a great article on bitlocker with Vista.   It does not exactly cover your question, but it is very instructive in the process and the technology (and might help you if you are facing a problem on the road) and its good information to have if you use bitlocker (which can be difficult and can cause problems of recovery if you do not just because of the extra complication of encryption (backup and restore). http://technet.microsoft.com/en-us/magazine/2008.06.bitlocker.aspx.

    I hope this helps.

    Good luck!

    Lorien - a - MCSE/MCSA/network + / A +.

  • Windows vista completely crushed hard drive won't start after installing the packs of services and internet explorer 9

    Thought I did my brother a favor so that he was at work and installed service Pack 1 & 2 on its 32-bit vista operating system, and then installed internet explorer 9 and it crashed the entire operating system nothing work, hard drive, monitor, mouse nothing. I hope this isn't a hardware problem which needs the advice of experts, the guilty feeling like I had left him only someone help with this can not start even to the bone g .thanks

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

    Contact the computer manufacturer and ask them to send vista recovery discs

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

  • My hard drive will not read discs?

    Hello

    I'm a moderately experienced computer nerd, and today I met this problem I can't solve everything. Late in the afternoon, I noticed that my (DVD - RW) disk drive wouldn't read my drive, so I went to do some testing, (assuming that the problem was the disc) and I found that it would not read any disk I put in it. CD or DVD would work. If at this stage I think it's a problem with the drive itself, so first, I uninstalled the driver for my DVD player and restarted my computer, but that did not work, so I plugged in an external CD player I got earlier. (who has been confirmed to work in the past) And that itself doesn't has the same work. If at this stage I think it's some kind of virus or malware or something of the sort that could prevent any kind of disc. So I did two scans of all of the computer (1 scan Spybot) and 1 AVG scan AVG came up with nothing, and Spybot came with the usual threats of low priority. So I had difficulty all 'threats' Spybot finds it, but it is still impossible to get either of my drives to work. At this point, I'm at my wits end. I'm running out of ideas, and I'm exhausted. So, any help would be appreciated. Thank you! (by the way, I use Windows 7 Ultimate)

    I could finally understand! This idea has just popped in my head that maybe the laser needs to be cleaned. So I veerrry clean gently with one of these sweet rags that come with the latest TV, and I noticed that you can move. So I took a paper clip (just to be more specific about what I might touch) and I moved the whole part of laser to the outside edge of the disc. And then it worked perfectly fine. Thank you all for your help.

  • Windows 7 asks Me to format the Seagate FreeAgent external hard drive I've used for more than a month

    I used Seagate FreeAgent as my external hard drive for more than a month now, but recently I am unable to access Windows 7 asks me to format it to use it. Somehow I can format the HDD without losing my data?  Or does perform a work around?

    Hi NuVille,

    Before perform us any of the steps, first of all I suggest you to create a backup of the data stored in your external hard drive on another computer.

    To save the data, you can connect your external hard drive on another computer and copy all the files and folders on the other computer. Later, you can connect the external drive to the Windows 7 computer and try to run the disk error checking and check if that helps you solve the problem.

    Access the link below and follow the steps to check the drive for errors and fix it.
    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    After completing the disc you error checking, try to check if you can access the drive.

    If the steps above do not I suggest you try to format the hard drive. Access the link below and follow the steps to format the hard drive.
    http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

    Note: there is no way to format without losing any data on the disk. Formatting the drive will erase all data.  This is why you must back up the data before formatting the hard drive.

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • New hard drive, fresh install. No boot disk?

    As I wanted a SSD in my laptop, I decided to install one in my laptop newly purchased, thus eliminating the original HDD with windows 8 installed.

    I was unable to install windows 7 from a USB boot (saying there was "no boot drive"), so I decided to use another laptop to install windows 7 and then replace the SSD in laptop computer provided.

    However, after I installed properly Windows 7 on SSD (loads Windows on another laptop), after placing in the laptop provided, I had once more the message that there is no boot disk.

    It recognizes the SSD in BIOS. I swapped the boot order to start the first SSD, but it does not recognize anything as something bootable.

    When you place the original HARD drive, with Windows 8 is installed, everything loads very well. But nothing else that the original OS on the original disk will not load.

    No BSOD, no real error message. Just a message popping up, saying there is no bootable disk.

    Is there something that I missed or messed up?

    Not a letter.

    It is first in the boot order, named: "HDD0: [insert name SSD]."

  • A 17 in the hard drive won't go in a 15-the macbook pro

    A 17 in the hard drive goes in a 15 to the macbook pro? both are about 6 to 7 years of age.

    There are two main sizes of the reader:

    Rated 3.5 "drives for desktop computers

    Nominal 2.5 "drives for laptops. Long ago, he must also worry about the thickness, but not for these two models.

  • New hard drive does not appear in the disk utility

    I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

    Thank you.

    You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

  • New hard drive. Do I need windows disk?

    I have a HP Pavilion dv7 laptop and recently the hard drive has failed...

    It was running windows 7 home basic 64-bit and did not come with recovery disks.

    im going to buy a new hard drive to replace soon and I was wondering what discs do I have to get my system running again?

    A member of the family has the same exact computer and I made a recovery disk of the Panel out of it. can I use this disc to install windows or anything? I don't really want to buy hp disc because I don't want any additional programs but if I wrong choose on a windows disk $7,100.

    Yes, you need a Windows install disc. However, there may be a way to restore from the image of the system of the other computer you have, that you say is the same. I'll get back to you on how to do it later.

    You can also use the restore disc, you created from this computer.  If it is exactly the same.  I'm not sure of the legality of it, but...

Maybe you are looking for

  • Portege R100 - resetting the BIOS password

    Hello I bought a R100 Porege about five years ago and have not used for 3 years. I forgot my password to start and I was wondering if you guys can help deal me with it. I should be able to provide the necessary information about the if necessary purc

  • NB200-10 - new hard drive and media test failure

    We have 2 NB200 if we take hardrive out 1 and in the other data on the disk will be lost. I mounted new NB200-10z hardrive when turn on I get the error message 'media test check the cable to break. There is no cable as hard drive just plugs into t he

  • A blue error screen and all of a sudden stop on my M70 Sat

    I have a portable M70 I buy only 3 weeks ago. I start to deal with the following issues-l' display system piece blue with an error message that I don't understand () just when I move a bit my laptop, or even when simply changing the angle of the scre

  • HP desktop # NY597AA-ABA, WINDOWS 7

    Videos posted on Facebook or AOL Huffington POst flicker. Videos on netflix are all OK. Verification of the material shows no problem, check video driver seems OK. What is my problem

  • HP mediasmart webcam in pavilion dv6 does not

    I have Pavilion dv6-3216us pc. When I run the HP mediasmart webcam webcam he usually responds. I reinstalled the software, but still it does not. When I troubleshooted compablity I showed as incompablity applications. Help, please