Upgrade from 5.1 to 5.5 tips precision required please

Similar Questions

• After the upgrade from 1.5 to 1.8 workspace, noting works - Please HELP

  After the upgrade work space of 1.5 to 1.8, noting the work.

  Gateway-go gives me 404 error. When I tried to see what was not working, I foud out that nginx was missing!

  In the Configurator-go page, I have

  Something has failed and we cannot load the screen that you were about to show it. You can check the logs for possible causes.

  When I click on the COMPLETE & SSL domain name

  Help, please!

  Worst upgrade ever!

  called support and they could not solved because they think that it was due to a previous DNS issue on my side. I ended up reinstalling everything since the beginning

• The upgrade from Lightroom 3.2 to 3.6 - uninstall required?

  Hello

  I already installed LR 3.2 and now downloaded LR 3.6, but I'm not sure if I should just install it in the same folder or if I have to uninstall V. 3.2 first, then install LR 3.6.

  Please, tell me the appropriate procedure for the upgrade! -Thanks!

  You simply run the upgrade Setup program, and he'll take care of everything.

  Mylenium

• Upgrade from Windows XP Professional to Windows 7 Home Premium

  Currently I have Windows XP Professional and want to upgrade to Windows 7 Home Premium.  Because I have the professional version does this mean I can only upgrade to Windows 7 Professional? or I can buy the package of between Windows 7 Home Premium?

  Windows 7 Home Edition premium will work fine.

  Windows 7 upgrade paths
  Microsoft has released a downloadable document from MS word with a list of paths to upgrade to Windows 7.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=e170eba1-5bab-401F-bbf5-00f0ee7fe0fb

  Note: The 'Upgrade' from Windows 7 version you are the owner requires a previous version (and ligitimate) from Windows XP or Vista. If you do not meet these requirements, then you must purchase a full version of Windows 7.

  Windows 7 upgrade paths
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Decrypt Windows 7 upgrades: the official rankings
  http://mossblog.AllThingsD.com/20090804/deciphering-Windows-7-upgrades-the-official-chart/
  (Save the graphic, and then open it using a photo editing software or Viewer to expand to a size more readable)

  Which is right for you?
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  List feature that provides each edition of Windows 7:
  http://www.SevenForums.com/tutorials/14422-compare-Windows-7-editions.html

  Windows XP users have two options:
  1) begins with an upgrade in place to Windows Vista, followed an upgrade in place to Windows 7
  The key is that you need a Vista DVD. So if you have your old DVD of Vista, dust off it.
  Read the details here:
  http://www.PAGESTART.com/xpwin7inplaceupgrade01.html

  (2) the position of official Microsoft: Windows XP users must make a Clean/custom Setup.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• upgrade from 9i to 10g problems/tips?

  Hello
  I want to know some problems that someone face when he upgrade from 9i and 10g, I know it's dependent on the environment, but I want to know the most famous twikies or problems or tricks that someone should do when you perform this upgrade.
  
  Thanks for any thoughts

  There is a guide to tahiti.oracle.com upgrade:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/TOC.htm

  The upgrade of Oracle 9i and 10g database: what to expect of the optimizer:
  http://www.Oracle.com/technology/products/bi/DB/10G/PDF/twp_bidw_optimizer_10gr2_0208.PDF

  Search Metalink (support.oracle.com) to 10 g upgrade companion PDF database and application.

  If one carries out executions plans are worse than you can use the following workaround to restore 9.2 behavior until it is resolved:

  optimizer_features_enable   = 9.2.0.0
  

• Upgrade from window 7 to 10

  Hey guys,.

  I am facing a problem while improving my window 7 to 10 of the window

  Here are the errors I have face while downloading the update of window 10

  1 code 80072F78). error

  2.) after diagnosed with this error I'm getting solution that my service process is not registered.

  Can u please help me with it, it would b a great help

  Billon

  Hi BhaskarChaudhary

  Make sure that your system is compatible with Windows 10. Check out the link.  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Also check this before installing Windows 10 on PC.  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-10-tips-before-installing-the-latest/4fbec413-FED4-4A18-B1DE-399a2d1e2a3a
  And if your system is compatible with Windows 10 then, I suggest upgrade you to Windows 10 through ISO files.

  See the article on Wiki to learn that "how to install Windows 10 through ISO files."
  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-from-previous-versions-of-Windows/31722b30-1da9-42BB-B331-0edc4649bf43

• Upgrade from 1.1.4 to 1.2 (VMWare) ISE

  We intend to do an update on our runing EHT on VMWare. Our current version is the 1.1.4 and we expect upgrade to version 1.2. According to the published notes, 1.2 works on 64-bit and we currently use 32 bit on our ISE. I have red all the release notes and upgrade of Cisco and all guide does not include the process to upgrade from 32 bit to 64 bit. I created the project for the upgrade plan, here's what I think for the upgrade. Create a backup of ISE 1.1.4 install ISE 1.2 of new virtual machines and then restore the databases of 1.4 and then will upgrade the databases to version 1.2.

  Hello

  You can run the stright upgrade Installer v1.2 takes care of the conversion from 32 to 64 bits.

  Edit: You will need to change to RHEL 5 64-bit RHEL 5 32-bit host operating system.

  What is a stand alone ISE or a depoymentof more then one?

  If you have a deployment, you can start with your secondary node of PAN (admin). When finished high school announces that it is v1.2 and when you upgrade the next node, an NHP, it is conect Pan automatically in high school

  There may be problems during the upgrade to ISE, but with my last customer goes to version 1.2, everything worked as it should.

  But I have to prepare for the worst with DB Backup, backup of certifiactes + pvk, having access to administrators AD etc.

  Tip is to copy the upgrade file to the local disk and run the upgrade from there and reset the DB on the PSN knots to shorten the time of the upgrade.

  See this

  https://supportforums.Cisco.com/community/NetPro/security/AAA/blog/2013/07/19/upgrading-to-identity-Services-engine-ISE-12

  See here for more information on the depolyment upgrade.

  http://www.Cisco.com/en/us/docs/security/ISE/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_011.html

  Tarik has a good post on upgrading to version 1.2:

  https://supportforums.Cisco.com/message/4077655?TSTART=0#4077655

  See you soon

  Post edited by: Mikael

• I upgraded from vista to 7, overheating/shutdown

  I've upgraded from vista to 7, the fan does not turn to cool laptop.  The computer gets hot without the fan and stops. Help, please. I tried to enter the BIOS to set the fan, but there's no solution.  The fan is clean and the vents have been cleaned, do not want to buy a new computer, because I got rid of vista.

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Lack of Configuration section in VAMI, vCenter active watch is not Accessible after upgrade from 5.5 to 5.8

  Hi all!  I'm having a bit of a problem that I can't find a solution for anywhere.

  I have a lab with two boxes of vcsa under 5.5 U2d, and wanted to move to 5.8 SRM.  I started the VRA 5.5.1 (I do not remember, real version number which was with MRS 5.5.1), mount the ISO 5.8 on both sides, restarted both, took the update of the CD (following the official update steps), but after the restart, the two vCenters show "enabled (not available)" and still list it as 5.5.1.

  I have validated the RV service is running.  I have been following this thread, regenerated certificates for the TWO vCenters & TWO VRAs: vsphere upgrade from 5.5 to 5.8 Server replication enabled (not accessible) has yet no joy.

  I checked the CROWD and the IP address is correct.  I tried to check /opt/vmware/hms/conf/extension.xml for the thumbprint and the file does not exist on each box, the only thing it is extension - template.xml.

  On the one hand, I have reset the vCenter database (/ usr/sbin/vpxd - d of VMware KB: reset the vCenter Server repository embedded for vCenter Server Appliance 5.x ), deployed a new VRA 5.8, and he had to register very well.  It's then it dawned on me what missed me: almost all the Startup Configuration where you specify the vCenter (see attachment)

  For grins, I recorded the VRA 5.8 of the 'old' vcsa work and tried to save it to the 'new' vcsa, which he could not with a lot of what looked like errors, assuming that because of 'new' vcsa already having a recorded SOAP VRA.  I re-recorded it back to the 'old' vcsa and is happy.  Installed SRM 5.8 (uninstalled 5.5 because I started with a clean database in the vcsa) and all is well on the side of the 'old '.

  I'm trying not to go this route on the 'new' side, as I a VDS, vSAN and twice as many hosts, so I won't recreate the vDC, cluster, add guests, etc.  I copied to /opt/vmware/hms/conf/extension-template.xml /opt/vmware/hms/conf/extension.xml and restarted.  Footprint arises, but still no configuration tips.

  Anyone have any ideas?

  Thanks for your reply. You said that the VRA is on a cluster, East of thatcluster HA-enabled? Because where HA must restart the VRA on another host, it does so through the ESX host and this could have emptied the OVF environment. And to even you'll always a working configuration until you start the upgrade or you try to perform any operation through VAMI configuration page. To be on the safe side, I think before upgrade, you can power off and then turn the unit on (simple restart is not enough) to make sure that the EPS of the FVO is recreated.

• Upgrade from Siebel 8.1 Production & Data Guard

  Hello
  We will have new material available for Siebel upgrade 8.x pre-production several months in advance. This material will be the same of prodcution with regard to size. We plan to use 'DataGuard' for Siebel 77 DB (2.5 to) replication on the new Siebel 8 DB pre-production server. My requirement is to have minimal downtime!
  
  I'm thinking next steps upgrade before the deployment weekend.
  1. take cold Siebel 77 PROD DB Backup
  2 database copy 77 PROD to the new pre-production Siebel 8 DB
  3. install and gateway of Siebel server, server Siebel, Siebel utility of database server and the Siebel web server extensions
  4. install the database schema and seeds
  5 import the new repository of Siebel 8
  6 test the application
  7 stop Siebel application and get ready for deployment to production
  
  Deployment weekend production steps:
  1. stop Siebel 77 application and DB
  2. start Siebel 77 DB data replication in the new Siebel 8 DB
  3. after the replication is complete, start Siebel 8 application.
  
  Can one that the steps above from the end of week of the production deployment might work, which means "DataGuard" replication to keep my DB Upgrade from Siebel 8 intact and wipe it away? I try to avoid the installation/configuration/upgrade to level the application during the deployment weekend.
  
  I'm lost and confused on how the upgrade of production will work. I have read several messages online, upgrade guides and haven't met good information/help for upgrade of production, all the support, the items are for the modernization of development environments!
  
  Please note that the 'Golden Gate' is not an option, do not have a budget for that!
  
  I'd appreciate any help.
  
  Thank you
  PM

  Now that you have added the stages of the upgrade, it is logical but there is no doubt some additional steps are required as you progress...

  regarding the statement:

  "I think that 'install & configure the Siebel servers' can be done before weekend of deployment without a database active, can anyone confirm that for me?"

  It might indeed and this could also be done on a copy of your development DB Upgrade environment. Siebel installation is not dependent on your DB, but there are some entries in your DB, which can be Siebel specific server, look at the guide for the copy of production if you don't understand what I mean. Restoration of Production environments in the Test [477772.1 ID] environments. If you move servers during the upgrade this guide will give you some tips too to areas that you need to consider.

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Upgrade from 17.0.9esr to 24.0esr, now all downloads are not visible at all anywhere

  I just upgraded from 17.0.9esr to 24.0esr. At first I noticed that download statusbar has not shown all downloads when they have been downloaded, so I decided to remove it. That has not changed anything because I do not see in tools-> Downloads tab. I tried to play with the browser.download.useJSTransfer and the browser.download.useToolkitUI, I've seen in my search, but they do not help. I also tried to change the options of the private browsing mode, and although I can see that downloads fail, I don't see when they download. I don't know what is happening.

  I have reset the settings of firefox and it seems to be fixed. I could not identify any option that could have been the cause. He could download status bar. I no longer need because new download managers to work pretty well.

• Why the scroll bar arrows disappeared from Firefox when I upgraded from Fedora 17 to 18 years?

  Recently, I upgraded from Fedora 17 to 18 of Fedora. Before the update, Firefox worked perfectly. Now, the arrows have disappeared of the scrollbar on the right. How can I get back them?

  This problem is not moved in other applications - in Firefox.

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Do you have a scroll bar (that is, only the buttons have disappeared)?

  You use the default theme of Firefox (Tools > Modules > appearance)?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  You can try to check if another theme or icon pack Linux brings them back.

• UPGRADE FROM WINDOWS 98 TO WINDOWS 98SE

  Hello
  I have a Portege 3110CT I want to upgrade from Windows 98 to Windows 98SE. Is it possible and how can I do?
  Francis

  Hello francis

  Do you have the CD of Toshiba Recovery and Tools & Utilities CD for this laptop?

• Why all the new features do not appear when I upgraded from 3.6.15 4.0?

  I upgraded from 3.6.15 4.0, but the appearance of Firefox has not changed at all. There is no Awesome Bar, Firefox Button or bookmark button. The only change was 2 of my addons have been disabled.

  The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.