Upgrade HDD to dv4 (novice needs help)

Similar Questions

• novice needs help with some questions

  I was myself ball how to design a website that is now almost complete, I need help, ensuring that everything is in order.
  My question is;
  at present, all the img sources are in a file in my computer IE... My Documents\My webs\site\image.jpg
  Now is this good? When I send this through the server it will be placed in another file and then the source will be incorrect?
  Matter that has any help, I know I'm a little sore but I'm just learning!

  If the path you have for your img tags has my documents... then Yes, it will be incorrect when you move the images on your web server. I'll put just generally in the way, I use on the server and worry about the pictures once I get the downloaded pages.

• Extension of the network - Novice needs help

  I'd appreciate some tips with a change I need to do to my wireless network. I have now works well, but I am somewhat a novice to this.

  My current network is composed of two computers. Computer A is a desktop computer connected to a router WRT54G2 wireless via patchcord. It is my main computer, used to create the network by using the CD that came with the router. Computer B is a laptop that connects to the network with a wireless WPC54G laptop adapter. Both computers are running Windows XP, and the network works well. The network uses WEP security.

  I'm ready to add C of the computer to the network. Computer C is a desktop computer and will become my main computer. Computer C is also currently running Win XP. I want to connect it via patchcord to the router WRT54G2, replacement of computer A. I bought an adapter WUSB54GC USB to A computer to connect to the wireless network.

  I don't know where to start. I first need to uninstall any software Linksys on both computers A & B to start all over again? Can I just unplug the computer from the router, plug computer C and continue? Any suggestions on how to approach this change without too much gnashing of teeth and tearing of hair is greatly appreciated. Thanks for your help.

  There is no need to uninstall the software of the router from any computer.

  You must connect the C computer to the router with a rope and connect computer A the card and install the installation for her disc.

• Upgrade to 6.6.1 - need help URGENT

  I'm going on vacation tomorrow and bought a Sony RX10 III for the trip. I just tried to test it and upload photos, but the LR5 does not recognize photos. So I bought the upgrade to LR6, but it still does not recognize the photos. Apparently, the version I have is 6.3, and I need to upgrade to 6.6.1. I tried to do the update, but it says my software is up to date. I tried to download 6.6.1 zip files, but I can not extract or don't know what I'm doing. Please help, as I have to make sure that I can import the image today.

  Downloaded Update at the bottom of the link?

  Install Photoshop Lightroom

• XP MCE said dll files are missing, maybe others. Starting price. Runs. Must fix. My files are corrupt? Terrified Novice needs help...

  Hello

  Please help me solve this computer.  I am an elderly person, not technical and I need to fix it myself if possible.  I studied the system widely.  I don't have the skills or knowledge needed to implement a fix.

  What worries me, is that my files have been damaged by the problems on this computer.  I don't know how to say.

  The system was custom built, not a branded computer.  I have 3 drives, all Originals Microsoft.  XPMCE disks (there are 2) say 2005 on them, the 3rd disc says Version 2005 updates.  He said not cumulative on the third disc. I don't know what that means... I don't know there was also a cumulative 2006 for XP... final.  XP Pro is 2002.

  I installed updates as much as I could, but am stuck with SP2, and I know that the system is vulnerable because of the missing updates.   I want to fix non-destructive if possible.

  Langa claimed it was possible, but he did not speak MCE, but Pro, and they are not the same.  I know not what integrators were not allowed to provide (food?) discs with this particular Version.  I've never done of all disks (experience, is what you get right after that you need), but I'm not sure that the system was perfect when I got it...  I don't have any other type of disk.  I learned that one must save or image the system, so it can be restored.

  The system starts and runs. But the SP3 update can "t be installed.  A program to work indicating that a dll file is missing.  In addition, the system restore stopped working.  I was told the system restore often confuses things and can 'break' installed AV and perhaps other programs, due to conflicts between Windows restoration files and programs that are not part of Windows in terms of time.

  I've always run AntiVirus and MBAM.  I have the instructions step by step for what I could try.

  I would like to find a list of parameters that should be enabled or disabled in different areas... so I can check that they are correct.  The area called services and to uninstall Windows components, I worry.

  I have not really requires... because I don't know how to get the information on this computer.  I ran the Scan Now command and he said I should put in discs... There are 3?   I'm afraid to do anything until I have found on the backup and the possibility of corruption of my files.  I'll have to print files, rather than risk losing things.  My drive back to stop working, don't know if it is related to the lack of files or settings to be wrong.

  Thank you for reading this... I tried to write paragraphs, to make it a bit clearer, I hope that it appears that way.

  Bonnie

  Try to run, type: cmd cmd type: verificateur auditor files SFC SCANNOW once windows starts, insert the

  XP CD, leave the screen. The File Checker runs automatically, at least with XP home & PRO. Also check this

  link for info MCE & SFC. http://support.Microsoft.com/kb/909059

  In addition, sfc is thru, remove xp cd, type: CHKDSK C: /F agree to restart, exit cmd, restart the pc.

  If the problems persist, open the event viewer & see what problems or specific files are always in need of attention...

• Calculations of edition and checkbox help (JavaScript novice needs help)

  Hey everyone, so I'm having a few problems with the implementation of my adobe calculation using the fields. I don't know a lot about the use of JavaScript so that any help would be appreciated.

  1. This is my first problem in simplest form:
  • I have a field (F1) and a field that uses F1 to calculate a result (F2).

  F1 = 18

  F2 = ((F1-10)/2) (which in this case, the answer is 4)

  Now where I will have questions, it's that I need a symbol of the addition to appear before the "F2" (the result here would be + 4)

  I took a picture of how I did it in Java where it would be useful to answer the question:

  

  2.

  My second problem is that I want a checkbox to change the values if it is pressed. I'm still lost on this part, but all this I want to do is the following:

  • If the checkbox is unchecked nothing happens. If the box IS checked, then I would add 2 to another field. If the box IS checked that the + 4 would become a + 6, so using the above problem.

  Now since this is my first time editing an adobe form and using the fields for calculations I'm quite lost on the boxes and what script would go inside my custom fields properties calculation script. I don't know much outside of what I learned today about JavaScript so that any help would be greatly appreciated.

  I thank in advance anyone who responds.

  The custom for the field F2 calculation script could be something like:

  (function () {}

  Get field values

  var v1 = getField("F1").value;

  var v2 = getField("CB1").value;  Check box value. "Off" otherwise we'll pick

  Add 0 or 2 depending on the value of the checkbox

  var v3 = v2 = "Off"? 0: 2;

  Perform the calculation

  var result = (v1 - 10) / 2 + v3;

  Add a '+' if positive

  If (result > = 0) {}

  result = '+' + result;

  }

  Set the value of this field

  Event.Value = result;

  })();

  This could be simplified, but it should help you get started. Replace "F1" and "CB1" with the actual names of the fields.

• Novice, need help PSD vs JPEG

  I am changing to PSE8 to PSE12 and made 12 today PSE12 automatically saves pictures published in PSD format where PSE8 them saved in JPEG format.  I do not use the organizer for catalogs, rather open folders where I saved my photos (e.g. Christmas 2013) and edit the photos that I like in PSE8 and then by recording their return in this same folder.  It may be the "right" way, but it works for me.  The image that I tried to use PSE12, recorded in PSD format which is not visible in these folders (windows image viewer is the default).  I really only use PSE to improve photos I like and want to share/send, use as my background of desktip, post on Facebook and print for myself or gifts via downloading a photo printing service (Mpix, Wal-Mart, etc.)  Is it possible to have default PSE12 offering in JPEG or should I be saving as PSD?  I get this PSD only works with the PS and takes more space, but is not the loss of the quality of the images the way JPEG don't ~ I'm not sure it's important that the way I use PSE.  Help for a novice?

  Save a PSD as a JPEG file is really a good habit to get into. Just in case you don't like what the picture looks like once the recorded sound, you can return in photoshop by loading up the PSD and edit cursors or layers or anything else where as when you register for a jpeg all layer information is lost because it essentially "flattens" the layers into a single image. If it makes no sense at all.

  As I do is I have a folder that contains my PSD and then my JPEG saved in the folder where you would look at the pictures. For example, in your folder my pictures, I have a folder called PSD and a folder called Christmas.

  Hope that makes sense

• Novice needs help of Voiceover

  Hello world.  I am a new user of hearing CS6 and am mainly interested in his voice manipulation capabilities for the voice-over market.  I have a few excellent educational resources (Lynda.com; Classroom In A Book; (etc.), but would like to have someone pronounce on where I can find voices of specific comprehensive tutorials.  There are a few on YouTube, but as I said, I really need something larger that a few videos 5 minutes or 10.  Thank you in advance for your help!

  Oh, I'm more interested in the real capabilities of change rather than the recording capabilities (for now).

  Thanks again!

  Phil Carson wrote:

  Basically, I'm interested in learning how to make several phrases in one sentence.  For example:

  "XYZ Company appreciates your business', 'your business."  "Please call soon.  "call again soon".

  I need to learn how to put these clips in a single sentence - sometimes even in the middle of a Word, the consonant or the vowel.  Then normalizing and other quick fixes can take place after that.  Or should I do first?

  While it will be easier to listen to while editing if insertions are approximately the same level as the rest of the material, a one part, it is not serious, and on the other hand, he doesn't. That does not appear to make sense, but it does. It's because the hearing has two hardware Assembly like this basic methods, and constraints are totally different. If you edit in waveform (that is to say, destructive) is very fast and easy save, but you will have more trouble evening of the results subsequently.

  But if you assemble your phrases in (non-destructive) multitrack view, it won't matter at all, because you can refine everything regards how the sound from the clips after you did the Assembly base of them. When you have it sounds all the correct however, you must still make a mix with the final file, so there is an extra step to do.

  If I did that, I'd go for the multitrack approach, because you can save your work as a session, and if you must go back and make changes, it is much easier and more flexible. So what you could do is to record all the phrases and have them in a single file, which you can add markers. Then you have the choice; export is the beaches of marker in multitrack, or turn at each range of marker in a separate file view and those import instead. The first method actually works very well (when you have understood how to make TI *), and results in less file space.

  * Select the beaches of marker in the list of markers, right-click on it, and you can export them to multitrack view. The only misfortune in this regard is that it the dump online, all on a beach and you then have to separate them to put them where you want. If you give the sensitive markers names however, it is not a too expensive task.

• novice needs help: incompatible recording volume ("flutter")?

  Hi all

  I'm new to hearing and struggled with my recording quality: I'm on a new dual-core laptop Toshiba multimedia, Qosimio running under Win 7 (64-bit) and using a standard desktop microphone. I read the faq and help files on the record but still still puzzled about it. I would be very happy to help:

  During the recording of hearing music (for example: a strum of a guitar string), I get a sort of floating: I do not hear sound of the whole continuous string. There are subtle sound "dropouts" (as it has inconsistent volume). Now, I am new to this so I'm probably not using the correct terminology... so, I posted a wav file allows you to hear:

  http://home.Comcast.NET/~samiri/Director/trash/InconsistentAudio1.wav

  When you use this same microphone in my laptop aged PIV under Win XP, the recording quality is very good. Also, when I downloaded Audacity (a free audio program) I think I've heard the same heartbeat... so maybe there is a way I need to set preferences (input) of the record on this machine.

  Thanks for any help you can offer.

  [email protected]

  There is no way to get the audio quality using the interface of the laptop.  Those usually installed on laptops are not designed for something other than headphones microphone for Skype.

  The good news is that there is a huge choice in terms of an "external USB interface.  This is a base: http://www.m-audio.com/products/en_us/FastTrack.html

  However, there is a huge choice - for example, it has only one entrance of MIC.  Many have two or more, if it's never any use to you.  Your choice will depend on the features you need

  With respect to the correspondence of the sampling frequency, which is under Windows.  Go to control panel, and then click sound.  You should get a menu with tabs with 'Read' and 'registration '.  During playback, right-click on what you use for monitoring (probably pregnant), select 'Properties' and then 'Advanced '.  You will have a drop-down list offering a range of options... probably just use 44.1 kHz 16-bit (although you can experiment).  Go to the recording tab, right-click on your mic input, select properties and advanced again and put the same way.

  It's a pain to do.  W7 is not beautiful?

• How to add dummy data to my database of test? a novice needs help

  Hi all
  
  I'm pretty new to oracle and I would mess around with it some more, I created my database (MVF) and created a test tablespace.
  Now it's what would be the best way to fill the space of storage of data? can I just insert a few lines in the tablespace? or are there ways more effective to do this?
  Perhaps someone who could provide me with a pl/sql script for it? or a procedure which would make this (insert x the amount of dummy data) on a regular basis?
  
  Thanks in advance!
  
  
  
  
  
  
  
  (ps this is my first post so please excuse me if my post is not according to the regular lines)
  
  Published by: 994141 on 15-mrt-2013 12:38

  Hello

  Welcome to the forum!

  994141 wrote:
  Hi all

  I'm pretty new to oracle and I would mess around with it some more, I created my database (MVF) and created a test tablespace.
  Now it's what would be the best way to fill the space of storage of data? can I just insert a few lines in the tablespace?

  This is the usual approach. You have some situations you want to test: unique compared to duplicate values, certain combinations of values, some missing columns, the values limits extremes, even the questionable data or invalid (for example birth_date in the future). Create individual INSERT statements for these cases. Write a script to do this, you can use the features of the Editor (cut/paste, search/replace) allows you to easily create statements or re - run them if you get something wrong the first time.

  or are there ways more effective to do this?

  If you want a large amount of data, you may copy it to an existing table or view. Even if you created the database, you probably have hundreds of lines in views of data, such as object dictionary. For example, if you have 100 rows in an employee table, you could say:

  CREATE TABLE employee
  (  employee_id     NUMBER     PRIMARY KEY
  ,  last_name     VARCHAR2 (20)
  ,  first_name     VARCHAR2 (20)
  ,  hire_date     DATE
  );
  
  INSERT INTO employee
  (       employee_id
  ,     last_name
  ,     first_name
  ,     hire_date
  )
  SELECT     ROWNUM
  ,     SUBSTR (object_name, 1, 20)
  ,     SUBSTR (owner,          1, 20)
  ,     created
  FROM     all_objects
  WHERE     ROWNUM     <= 100
  ;
  

  You might find yourself with a large number of employees 'SYS '.

  Here is another way to generate data. Say, you want a table with 60 lines, one line per day during the last 60 days:

  CREATE TABLE     test_dates
  AS
  SELECT     LEVEL               AS dt_id
  ,     SYSDATE - LEVEL          AS dt
  FROM     dual
  CONNECT BY     LEVEL     <= 60
  ;
  

  Perhaps someone who could provide me with a pl/sql script for it?

  As you can see, a lot of things can be done without PL/SQL, just using plain old SQL.
  Of course, PL/SQL is available if you really need.

• PSE7, Novice needs help w/context

  I would like to take the furry knee of the face of our new granddaughter grandfather. I tried to select its image and used a 2 pixel pen. I then used a white background with different effects, clouds, etc. It's does not because it is too hard and not natural. Is there a way I can make it look as if she rests her head on a soft blanket?  If so, please give me the details on how to achieve this result.  I am learning and need more details.

  I would also like to know how to "soften" his image and change it to B / w... so much to learn, so little time.  Thank you!!

  To add a cover:

  1. I did an image search Google on "baby blanket" and found this one and selected a part of the cover (note the selection lines):

  

  2. copy this selection to the Clipboard.

  3. open your photo and pasted the clipbaord coverage, create a new layer.

  4 use the move tool to rotate and place the cover layer.

  5 removed excess coverage with the Eraser tool.

  The next step was to balance the lighting (it was too dark on the right side):

  1 creates a layer of setting levels and moved the Middle slider left to clear up the right side. Don't worry that the left is now too light; the next step fixed that.
  2. Select the gradient tool and set the options:
  -Transparent foreground
  -Style: Linear gradient
  -Merge mode: normal
  -Opacity: 100%
  Uncheck the reverse, check the transparency
  3. set the foreground on black color.
  4 draw gradient starting at the left edge of the dark area and draw all the way to the right.

  5. the lighting was still slightly different from the 2 sides so I went back into the layer levels and tweaked the Middle slider until the lighting has been balanced.

  Here is the result:

  

  To convert to B & W:

  Add an empty layer on top and do Alt + Shift + Ctrl + E. This creates a snapshot of the net result of all of the layers. You can also simply flattened the image in a single layer but I did the instant thing just to preserve the layers for an example.

  On the layer of snapshot (or flattened layer) do either:

  1. enhance > adjust color > remove color

  2. enhance > adjust color > Hue/Saturation and move the Saturation slide completely to the left.

  The 2 methods (and there are others) give slightly different results. In my example, I did the second.

  

  To soften the image there may be filters in your PSE version. You can also try a Gaussian with a very small radius blur.

• Animatics Smartmotor, Novice needs help!

  I installed the software (intelligent motor interface) SMI that comes with the engine.  It works pretty well, as soon as I start the software and plug motor that I can type in the EMP ASCII command:

  EIGN (2) ' remove the limit movement

  EIGN (3) ' remove the limit movement

  ZS ' of manifest errors

  ADT = 100 ' acceleration limit

  VT = 450000 ' speed limit

  PT = 300000 ' Position of Destination

  G                   'GO

  I want to use LabView to control the motor. My assumption was to realize a VI that has made the serial communication and send the same commands to ASCII syntax via serial writing, etc.  See attached VI.

  I get no response, I don't know what is happening, OR what I do really besides...

  Is it possible and common sense? I can't use SMI and instead simply use LabView series read/write commands to communicate with him?  Or is the software SMI doing other tricks behind the scenes, that I don't know?

  Do you have a manual for the SMI software control?  You should try the simple command you to give you an answer.  For example, if there is a serial number query command, you should try to issue only and read buffer of visa to see there at - it a response or not.  Open OR spy when you are troubleshooting your code more visibility.

• Veriton M2631 - I want to upgrade to power 300 watt, need help.

  Hello

  I'm looking for a 300 Watt power supply which made / work in veriton M2631 case.  Is there a classification or a size indicator that I should look for?  Is there a list of compatible power provides a place where nobody knows of any brand/models that are compatible?

  Thank you

  That line.  The logisys is low-end and I decided to go with the b EVGA 600 just for peace of mind and security.

• Several boxes click 1 slide does not - novice needing help

  I currently have 4 boxes click on a slide.  The student must click to find out what surprising ingredient is included in each product.  However, after clicking on one or two, the slide appears out max on time and no other boxes click then display the text when you click on it.  I saw a few other elements published on this topic, but I'm at the beginner level and it mentioned or advanced collection actions.  Can you provide step by step details for how to ensure that the student is able to click and see all four boxes text, before moving on to the next slide?  I have a screenshot below - thank you!

  

  Hello and welcome,

  Replace the simple action (I think you used a simple action) by a standard tip action and the reading head will not move.

  http://blog.lilybiri.com/why-choose-standard-over-simple-action blog post, or if you prefer a video

  Simple Standard vs action

  I also give a break to the button continue and shorten box click so that their break is before the break of the button continue. For the click boxes that break is at the end of their calendar, which is in your case the end of the chronology of the slide. For buttons, you can time the pause in the timing of their properties panel accordion.

  Lilybiri

  PS why you post in the forum of advanced Adobe Captivate users if you are a 'beginner '?

• Complete novice needs help with developing a plugin in Xcode

  So, I decided to start climbing the steep learning curve to develop plugins for AE.  I downloaded the SDK from Adobe and follow the directions as best I could, but I get this error message:

  

  What should I change in Xcode so that skeleton is based in fact.

  Thank you!

  Hi Lazlo,

  The coming SDK for AE CC will be new to XCode 4.5 and MacOS 10.8 sample projects.  In the meantime, you can probably change the XCode project by changing the SDKROOT (in the project build settings) to 10.7.

  Zac