Unexpected error message

Similar Questions

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• "Unexpected error" message when running Extension

  When I try to run an Extension in Photos (DxO OpticsPro) I get the message "Cannot edit with DxO OpticsPro for Photos".  The message reads, "an unexpected error has occurred." Can someone please help with this?

  ... The error does not appear for all the photos I try to open.  Only for one so far...

• Unexpected error message search

  XP everything works fine except when I want to search the readers of file, folder, photo. Then I get "error unexpected Action could not be performed" (no code number) message. Someone knows how to help me solve it?

  First test:

  Start > run > cmd [Enter] [command prompt opens]
  regsvr32 jscript.dll [Enter]
  Regsvr32 %Windir%\srchasst\srchui.dll [Enter]

  If this does not work, reinstall the search by looking in the Windows\inf folder hidden for the srchasst.inf file, right click and make Install.
  MS - MVP - Elephant Boy computers - don't panic!

• HP Deskjet 3050 a - two unexpected error messages

  I used my 3050 has fortunately since buying in November 2011. I buy genuine HP cartridges, XL in size and provided directly by Amazon.

  Each cartridge hp301 held recently, replacing within days of each other. Replacement of the cartridge of fine color and the alignment page analyzed as usual.

  (1) However when I replaced the black ink cartridge, the printer refused to recognize the page alignment when offered for scanning, and after several similar attempts set to 'default quality '.

  (2) the message "no compatible cartridge" and then began to regularly appear on the printer screen, sometimes blocking attempts to print.

  Please any player does not recognize one or both of these problems?  I ran HPPSdr.exe and says the printer is working correctly. How then can I get the printer to its fully operational state?

  Thank you pending, Jon G

  It looks like two of these stem from the same problem: a problem in the ink system.  I would recommend a complete ink system reset on the printer.

  * Remove the cartridges from the printer

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 60 seconds

  * While the printer is turned off: get a fluffy and clean water

  * Clean the electrical contacts of the black and three-color cartridges and corresponding contacts in the printer

  * Dry contacts

  * Plug the printer back to

  * Insert the cartridges after the powers in place and asked to supply ink printer

  There is also a document to the default alignment issues which can be found here.  I hope this helps.

• Catalog does not open due to the "unexpected error".

  Although I installed Windows 10 weeks there, I used LR 5 several times since.  Now I get the unexpected error message.  I have 3 other catalogs, although I am not encouraged by the fact that they have dates of 01/05/2015, 12/01/2015 and 27/11/2014, none of them is open for the same reason.  Integrity tests the result in the same error.  I tried not to create a new catalog.  I would like to make a return to the top of this catalog as it was before today and the one before that.  What my next move here?  I have

  I could open a supported catalogue on an external drive.  By trial and error, I got another error message, but this time it said I didn't have administrator rights in the file I was trying to save in.  Should occur during the recent migration of Windows 10.  I got the necessary permissions and so far seems to work very well.  But thanks for your interest!

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Repair Microsoft error message unexpected error cannot run

  I downloaded MS fix and tried to run, but get the error message that says: "an unexpected error has occurred, Wizard cannot continue.

  I am running windows xp.

  Any help here?

  Thank you

  You can post in the fix it Center forum here:

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You must have at least Service Pack 3, use of the center of Fix-it.

  I think that you also more have installed on your system at the MSXML 6.0 parser (check in Add/Remove Programs).

  You can tell them that in the new thread you create there what the problem is that you try to fix and the Fixit you try to get to work.

  Small details like this are useful.

  I have never personally seen a fix it solve anything but maybe they work sometimes.  What would we do if there is no solution its?  Fix it yourself

  If you want to continue your question on here without using the not specified fix it, do this:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• "windows has recovered from an unexpected error" error message has frozen.

  Hello, I have a problem with my laptop.  This has never happened before and just recently it spent d ' attribute.  I mainly use FireFox.  One day while browsing in the laptop froze as I began to browse Facebook with Internet Explorer.  It was frozen and stayed like that for over an hour.  The mouse icon showed something treatment but it shouldn't take an hour or more to process.  After pressing the power button to turn it off manually, I restarted.  A ran memtest that found no problem with the memory.  The HARD drive has been analyzed using System Mechanic for errors and claimed that fixed it.  I ran defrag my computer C:\ [Properties].  It froze again just by going to the homepage on FireFox.  After the reboot it froze after that came the message "Windows has recovered from a stop unexpected.".  I couldn't move the mouse, not capable of what be a right-click or bring up the Task Manager, but the mouse icon appears to show the transformation is done whenever I brought on the Windows error message.  What does that mean?  I've noticed more than a moment of mobsync.exe running when the system froze.

  Laptop a 3gigs of RAM and an Intel Pentium Dual-Core processor.  For some reason any reduced by concerts every week HARD disk space.  I'll update more and give more detailed specifications as soon as I can get my hands on my other diagnostic software.

  Update

  System Mechanic found the registry fragmented.

  Hi SoujiroMasaki,

  Thanks for keeping us posted and share this information with us.

  Please answer the question-

  The Windows was preinstalled on the computer?

  Method-

  If Windows was preinstalled on the computer, then I would have you contact the computer manufacturer to obtain a disc.

  We know if you need help. We will be happy to help you.

  Thank you.

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  [Moved from comments]

  Hello

  Re: Java... You should do some research and decide. I disabled the add-on modules. Many would say that this is not enough.

  Here is an article good start:

  Java security hole: so forth and so | Articles from Computerworld:
  http://blogs.Computerworld.com/cybercrime-and-hacking/20921/Java-security-flaw-yada-yada-yada

  Search terms such as 'java vulnerability","java security"and" disable java "will return useful information.

  Don

• When you open lightroom on my pc the message unexpected error opening catalog is displayed

  When opening upward of lightroom on my pc the message unexpected error opening catalog appears with options to try again, choose different catalog or get out. Can anyone help? At the same time when trying to update photoshop / bridge is 52% and update fails.

  Hi Dirk,

  What is the version of Lightroom installed on your computer?

  Could you please try to open a new catalog, or open a backup catalog and see if you still get the same error.

  And for the issue of the update of Photoshop and Bridge, I suggest you to start a new thread on: download, installation, commissioning

  Concerning

  Tanuj

• I get this message when trying to open the catalog, lightroom version 6 unexpected error opening I use a mac. I tried to use an earlier version of lightroom still get the message.

  I use lightroom 6 and cannot open my catalog, I get a message ""unexpected error opening catalog " I have a mac OS X version 10.10.4 Yosemite I tried to use an older version of lightroom and am still getting the error message."

  Jackie, try to open the new catalog, and then 'import of catalogue' the problem we... Let us know how it goes, or how far you get with it.

• U44M1P7 error message / ASU has shut down unexpectedly

  I get the U44M1P7 error message when you try to update Photoshop CC Creative cloud.

  The last lines of the log reads as follows:

  [Total Timer] took 5912 milliseconds (5,912 seconds) DTR = 1891,07 Kbps (1,84675 Mbps)

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. Exit code: 0 - no error.

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. END - Installer Session

  17/12/15 14:06:06:367 | [INFO] |  | OOBE. OF |  |  |  | 51551. *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  17/12/15 14:06:06:876 | [ERROR] |  | OOBE. OF |  |  |  | 51565 | ASU has quit unexpectedly.

  I use a MAC with El Capitan 10.11.2.

  I tried to restart the MAC, run CleanMyMac and tried a direct installation of the PS, but the update always get an error message.

  Please tell us what should I do to solve this problem.

  I'm glad to hear that!

  You are welcome!!!

• Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and has already managed to success

  Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully.  It's the exact error message, there is NO error code!   It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum.   PLEASE ANSWER!

  

  Hi tracyes31040766,

  If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

  Let me know how it goes.

  Kind regards

  Nicos