Upgrade not possible

Similar Questions

• Windows 8.1 upgrade is not possible because win 8 is not enabled

  A few months ago, I bought a new laptop of Toshiba Satallite with 8 Windows preinstalled
  Now I want to upgrade Windows 8 to 8.1 Windows. But I don't see the upgrade of Windows 8.1 in Windows store. I think it's because my current installed windows seems not you be activated...

  When I try to activate, I get error: 0xC004F074.
  I found a solution using the command: SLUI 3 and then enter the product key to activate it, but I don't have a product key! There is no sticker with a product key on the laptop.

  Could someone help me with this question, so I can activate my current installation of Windows 8 and upgrade to Windows 8.1?

  Post edited by: mbarten

  Hello

  I had some problems with an upgrade to 8.1 to win in the past...
  Finally, I managed to install the Windows 8.1 update once the laptop has been set back to factory settings.

  I'm not sure if this should be done in your case, but where the 8.1 Win update is not possible after installing all the windows updates, you should reset the PC back to factory settings. After that the upgrade should work.

• Qosmio F10: processor upgrade is not possible?

  I have a Qosmio F10 has a 1.7 ghz processor.

  Is it possible to update. I'm doing some serious video editing and need at least 3.0 ghz

  Hello

  Usually it of not possible to upgrade the CPU on laptops because of several reasons.
  But I read in this forum that some users here in the forum were able to replace the CPU on different laptops.
  However, this replacement will kill you warranty and if you do something like that you can do at your own risk!

  AFAIK the QOSMIO F10 series are a Pentium-M processor high-performance all-in-one PC.
  The microprocessor used depends on the model, but these processors were shipped with this series F10
  Mobile Intel Pentium - M 1.50 GHz (processor number; 715)
  Mobile Intel Pentium - M 1.60 GHz (processor number; 725)
  Mobile Intel Pentium M 1.70 GHz (processor number; 735)
  Mobile Intel Pentium - M 1.80 GHz (processor number; 745)
  Mobile Intel Pentium M 2.00 GHz (processor number; 755)
  Mobile Intel Pentium M 2.10 GHz (processor number; 765)

  It seems that the mobile Intel Pentium - M 2.10 GHz is the CPU more powerful that could be used and is compatible with the motherboard and you.

• I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  Hi [email protected],

  Please uninstall Lightroom using Adobe cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Then download and install the updates from Lightroom 6 from the following link: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• Satellite M70-165: unit of CD/DVD can't read data DVDs - "not possible access to D:.

  Hello world

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Since then, the CD/DVD unit can read DVD audio, CD, or movies, but when I open a DVD (DVD software) data it is said that "it is not possible to access to the D:\." and something like "does not correct" (I use an Italian version of Win XP so I have to
  translate the messages in English).

  All drivrs are regularly installed and there should, in theory, work very well.

  I am a user of entry level, and I don't really know what to do. I attended every single forum on the issue for the past few days, but nobody does
  could help me.

  I would be extremely grateful if someone could help.

  Thanks in advance!

  Hello

  This error message has been documented on the site of Microsoft Knowledge:

  [Error message when you access the CD or DVD drive after upgrade you to Windows XP: 'Incorrect function' | http://support.microsoft.com/default.aspx?scid=kb;] EN-US; 315350]

  The documentation says that this problem can occur if the registration of CD from Roxio Easy CD Creator program is installed on the computer, and if the version of the CD burning program is not compatible with Windows XP.

  Please take a look at this Forum thread too:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  A user has solved this suppression of some video capture software that had a DVD DIY option.
  These programs may change the whole registry values and causes these annoying problems.

  Please check if you have installed these programs

• Debounce counter signal digital filtering is not possible?

  Hey all,.

  When you read a flow meter signal at lower bitrates, the signal bounces. Because these bounces are count in addition to pulse correct, this leads to an output of counter unreliable. With a range of joint, I can see the behavior that bounces and determined that the rebounds are starting to occur around 100 Hz. The flow meter has to be in the order of 1500 to 10 Hz. remove all other devices of the system with the potential to influence the signal has no effect.

  Bounces produce both on the edge of the fronts and.

  Because I use a 9188 compactDAQ chassis and a meter module 9411, it seems that it is not possible to use the digital signal filtering? I want to establish that it is a correct assumption.

  When adding a digital camera filter (see the attached VI) I get the following error, explaining that the activation of the filter is not possible.

  

  Upgrade to DAQmx to 9.2.3 makes no difference.

  I read about using a meter of output to generate own impulses (with a high enough to avoid pulse width bounce) here. For me it is not an option that I don't have an output of the meter module.

  Are there other ways to get a correct count of edge output of the signal bouncing?

  Kind regards

  Bram bolt

  Dear Bram,

  You're right, digital filtering is not supported with the second chassis cDAQ generation (like NI 9188), I forgot that one (I tested with a chassis 0172 and worked well). What we can do is to measure at the same rate and filter the glitches in the software, please marine following example .

  Best regards

• How to go beyond log in password, or reinstall XP, if this is not possible?

  Or if not possible how to re - install Windows XP and get rid of the currently installed Xp

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. See the article below

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

  For the reinstallation of Windows XP, see article below

  How to install or upgrade to Windows XP
  http://support.Microsoft.com/kb/978307

• HP laptop Beats 15: Incomplete restoration and don't reset not possible

  I upgraded from Windows 8 to 10 Windows, somehow my google chrome has become corrupted.  I tried to do a factory reset, but got an error message which reset was not possible, created a recovery drive and tried to perform a system recovery.  Incomplete recovery now appears on the screen when it is eaten on.  I am unable to do anything else.

  Hello

  You are welcome

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select CD-ROM or USB key, depending on the type of media you created, and then press ENTER - if you are prompted to "Press any key to continue...". "- make.

  Kind regards

  DP - K

• Highway X8.2.2, Changing default SIP Port for B2B calls is not possible

  Much of community support.

  I 10.5.1 (SU1) of CUCM and X8.2.2 Expressway.

  I have configured without VPN Jabber and B2B based on the Document calls "CVD-CollabEdgeUsingBE6000 - Apr14.pdf.

  everything worked fine for months, but after the upgrade of the X8.2.2 Express way B2B calls are no more work.

  After troubleshooting, I found the following:

  the DSF Guide tells me to change the default Port to 5061 to 5560 B2B calls because 5061 is also used for the integration of Jabber.

  When I look at my record of wirekshark I see cucm tries to connect to the port 5560 expressway, but after sending a SYN packet, cucm receives a RST packet.

  When I change back to the port of 5560 to 5061, everything works well again for B2B, but of course encrypted calls Jabber connection is not possible more.

  for me, it looks like a bug, but I found nothing on the 'Bug search' tool.

  I also tried to disable all Protection rules and I also have a firewall rule for Port 5560. I also tried to change the TCP Port to something different, 3999 for example. All this without success.

  Just a little look in the guide.

  Two caveats. First thing the guide explains unencrypted SIP - TCP connections, if you want to be aware that both sides use TCP or TLS. If you are using TLS certificates must be good as well.

  5560 isn't a port on the highway, this is the port for the trunk on CUCM.

  What do you see CUCM sending to Highway: 5560 Setup is not ok.

  The port of the highway will not be changed.

  If you look at page 30, he 5560 port is used for the "incoming Port *" and the bottom of page 31

  You can see that it uses the Expressway IP with port 5060.

  On the highway, you configure the area to port 5560 (page 34)

  And of course the firewall should also be ok.

  Please note messages posted under the stars below and set the thread if it's an answer!

• TC 7.3.1 not possible to install on endpoints

  Hello

  We ran into Bug CSCur63326 presentation question on / off with TC and MCU codec.

  According to the Bug, the problem came in TC7.2.1 and must be fixed in TC 7.3.1 which is downloadable since Tuesday.

  So, I downloaded the SW for a variety of endpoints that we have.

  Unfortunately, it is not possible to upgrade to this version, any version prior to, or what type.

  Once the SW is downloaded and the installation starts, it does not directly after:

  'Check the signature on the firmware image' begins. According to the "installimage.log" of the codec it says failure of the verification of signatures! »

  When I tried the same thing with my EX90, connected on the public internet behind a DSL router, verifying signature takes forever, but the update is successful.

  Someone at - it an idea?

  Best regards, hans

  Hi, check again you get the download software appropriate for your codecs. Even if they all run TC software, there are different flavors, so be sure that corresponds to the ID software (such as s52000).

• 8.1 Overview (Eng) to 8 Pro (Dutch) decommissioning is not possible

  I have a Dell Alienware X 51 Dutch to Win 8 that I upgraded to Win 8 Dutch Pro.

  I upgraded to win 8.1 Overview (Eng), given that Dutch is not available.
  Now, I want to go down again to Win 8 Pro (Dutch), but this is not possible.
  I tried via the windows recovery tool, but the tool shows my DVD to upgrade Windows 8 Pro is not a valid recovery media.

  I tried to boot from Win 8 Pro Upgrade DVD, windows starts the installation, the PC reboots, but after restarting Windows, he then said "inaccessible boot device".

   
  I don't have the original Win 8 installation DVD since it was not shipped with the pc.
  What should do?

  Hello everyone

  It seems that I indeed do a reset to factory... just ordered a windows dvd.
  Andrew, thanks for the reply, but I did not have this dell recovery program on my pc!

• spend 5.0u1 + RS 5.0.2 to vCenter vCenter 5. 1 b + SRM 5.1.0.1 really not possible?

  Hello

  I vSphere business with vCenter SRM 5.0.2 on two sites (SRM for two protected volumes and two recovery volumes on NetApp file on every site server) and 5.0u1 and I guess its time for the 5.1 branch. But in the documentation for the MRS it is explicitly stated that MRS. upgrade to 5.0.2 5.1 is not possible. Is this really true? This means that I need

  d ' being stuck to 5.0 versions forever?

  -to completely uninstall RS, remove from its database, install 5.1.0.1 and create 5.1 SRM and set it up from scratch on each site?

  Or should I just wait for the next version of SRM 5.1 (5.1.0.2?) - if so, when it comes out?

  Thank you

  David

  Hi David.

  SRM 5.0.2 was released after 5.1, there is no built-in 5.1 code that knows the way to upgrade to 5.0.2.

  Good news, it is that there should be a 5.1.1 new releases in the next 24 hours that will have this ability... so your upgrade path is now directly from 5.0.2 to 5.1.1.

  You will probably spend a lot more time on the upgrade to vCenter with every new bit it to with SRM upgrade - it's pretty simple.

  Hope that it took you time before you rebuilt.

• Download assets is not possible

  I have a full membership of the CC (student-teacher) and you want to download assets in the market place. Not possible: I need to upgrade my plan (?). What now?
  This is not the first time this question appears in this forum, but I've never seen a response!

  Please contact customer support Cloud Creative Learn & Support

• IOS screenshot 10.0.2 - not possible

  Since updating to IOS 10, its not possible to make a screenshot using the home and power button.

  Someone at - it a solution for this problem?

  Thank you

  Rainer

  It works in the same way he has always done on my iPhone 6. Try to restart your phone and try again.

• import playlist is not possible after updating itunes

  I installed itunes to 12.5.1.21 (OS Windows 10, German language). Now, it is not possible to import old/previously exported playlists more. The error message says something like (translated from German): "xyz" file cannot be imported, it seems, it has been exported incorrectly.

  Someone has this problem and are there corrective action do you?

  I have the same problem. All the Solutions!