upgrade of database and change oracle_home

Similar Questions

• Upgrade of database without changing the statistics

  Hello
  
  Is it possible to upgrade the database (for example, from 10.2.0.x to 11.2.0.x) without changing the statistics even after upgrade?
  
  If there is possibility made me know the process to do this.
  
  Kind regards
  National Stadium

  Srini Chavali wrote:
  One possibility would be to lock statistics before applying the 10.2.0.5 patch

  Preserve the statistics with DBMS_STATS. LOCK_TABLE_STATS [ID 283890.1]

  In general, this is a bad idea for the reasons mentioned above

  HTH
  Srini

  Srini thanks for sharing of the doc.

• Upgrade to vSphere and change equipment

  2 ESC PE2050 3.5U3 cluster with CX300 FC SAN

  I need to upgrade to vSphere - VC Inc., as well as change the PE250s to new hardware (also PE2950, but with the rear plate PCI-Express and more memory) and replace the Equalogic PS5000X iSCSI SAN

  (I find the CX300 with 10K disks being totally useless in terms of speed and virtually unusable in the current configuration)

  What would be the best way to do it?

  -upgrade of VC,

  -Add 2 new servers connected to the SAN iSCSI with a clean install of vSphere,

  -configure new servers,

  -do the old servers through to see Software initiator iSCSI SAN.

  -move the VM to SAN iSCSI with vMotion

  -give up the old servers & FC SAN

  Is it achievable?

  Thank you

  SEB

  Your research plan sound with the exception that you will use "Storage VMotion" to move the virtual machines, not of VMotion. By opting for vCenter/ESX 4 you'll do yourself a lot of favors too:

  1 iSCSI Performance is improved in ESX4 (even if you do not mention if you use hardware or software initiators)

  2 storage VMotion is integrated in vCenter 4 which will move the easy virtual machines

  3 storage VMotion is also much faster on ESX4, but I don't know that you'll see the speed increase from your source VMs are on ESX 3.

  You must also update all the tools and the virtual material on your virtual machines, this can be done with the new update manager.

  Edit: I forgot to mention that the EqualLogic iSCSI stuff is often times much faster than the fiber (according to the table). I wouldn't trust anyones blanket assertion that fiber is always faster than iscsi.

• Upgrade of database and ASM 11.2.0.1.0 to 11.2.0.2.0

  Hello
  
  I have a 11.2.0.1.0 existing ASM and non rac DB on red hat linux 5 and plans to upgrade to 11.2.0.2.0, I have two primary homes to oracle (ASM and DB) and oracle ensures two houses to upgrade and I was wondering wat is d best approach.
  
  I read this guide: http://gjilevski.wordpress.com/2010/10/05/upgrade-to-oracle-11-2-0-2-from-oracle-11-2-0-1/
  
  Thanks in advance!
  Blais

  With patch readme, you can also consult the MOS score:

  Oracle11g Data Guard: database rolling Script upgrade Shell [ID 949322.1]

  Oracle 11 GR 2 upgrade companion [ID 785351.1]

  Concerning
  Rajesh

• Hello, I get upgraded my computer and change the card mother and new CPU.__Is it no problem to install my OS. and re-activation. ???

  Activation

  If you have a retail version of XP, there will be no problem. A repair installation may or may not work. Of course you will be smart and save your data on an external first.

  If you have a version of XP OEM, it is related to the original computer on which it is installed. Since replacing the motherboard and processor you effectively create a new computer, you must purchase a new copy of XP in this case.

  http://www.michaelstevenstech.com/moving_xp.html - to change the motherboard
  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand
  MS - MVP - Elephant Boy computers - don't panic!

• Upgrade ERP database 11g and ATG7 with SSO integration

  Please let us know how to perform upgrade BY Database 11g and ATG7 with SSO decline.
  
  Kind regards.

  Is there any space stage, do we do if we have implemented SSO after upgrade DB 11 g and 7 ATG?

  You can follow the same approach to upgrade the database and apply the fixes 7 ORS ATG group level.

  Please make sure that you apply the patches in (known issues on top of 11i. ATG_PF. H.Delta.7 (RUP7) - 6241631 [858801.1 ID]). In addition, make a full backup before you start this on your instance of production and if possible get an instance cloned with SSO enabled and test all patches on an identical instance.

  Thank you
  Hussein

• Upgrade to EBS and oracle database examples database

  Hi all

  I'm upgrading our database of 11.1 to 11.2.0.4 EBS Note 1058763.1 said the examples of oracle database installation is required. The database examples guide also gives this link: Oracle database software download | Oracle Technology Network | Oracle

  But the link does not 11.2.0.4 software file linux 86_64.

  Am I missing something here...?

  Kind regards

  Vinod

  Hello

  The two 11.2.0.4 of the database and the CD examples are available in the patch 13390677.

  The part of the database is included in the files 1 & 2.

  The examples CD is in file 6.

  Kind regards

  Bashar

• Migration and upgrade of databases

  Hello

  We intend to migrate from the data center to the new location. The new data center already have the hardware. We must move the dump data and upgrade the database. Our database most are on Oracle

  10g solar UNIX and the new material is on Oracle 11.2.0.4 with Linux (Oracle or Redhat Linux). Do the following activity:

  (1) taking the export on the basis of existing data.

  (2) move the dump of the export to the new location, as well as archived data that is stored in the Ribbon. (this is where a suggestion required more about different ways to do it).

  (3) import and the upgrade of the database in the new location.

  Might suggest a certain to please the strategy and useful tool which, for this activity.

  You should move all the 100 + databases in a window of 48 hours with datapump? It is a command

  What is the capacity of the network (i.e. How fat is the pipe) between the two locations and how pieces are? As a general rule, there should be no loss of data or corruption during the transfer of files over a network. The time required for move/upgrade a database of 300G can only be determined by performing a test upgrade that looks close in the middle of production.

  HTH
  Srini

• Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

  Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

  We have identified two questions:

  (1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

  (2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

  We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

  Sorry for the inconvenience.

  Jason San Jose

• change password of oracle database and reconfig coe for the new password

  I want to change the password for the database for the security issue, but I want to know what configuration should I make in my content on the web Center?

  Hello

  Assuming it as 11 g it is 2 places where change is:

  1 WLS Console - Services - Pool of connections to Data Sources - SDR-

  Here the password section must be changed.

  2. navigate to /ucm/cs/bin and run the system properties applet - database and there. This is necessary if you use the standalone applets like IdcAnalyzer etc.

  Thank you

  Srinath

• Hello, I got a CS5.5 for Windows Upgrade Version and changed to a Mac. Now I need the Mac Version. I tried to install Adobe download. Unfortunately, it does not accept my password. I guess the cause of the Upgrade Version or the Version of Windows I o

  Hello, I got a CS5.5 for Windows Upgrade Version and changed to a Mac. Now I need the Mac Version. I tried to install Adobe download. Unfortunately, it does not accept my password. I guess that the cause of the Upgrade Version or the Windows Version I own. My system: Mac OS X 10.6.8 2.8 GHz. thanks for the replies! Greetings, Eva

  Here's a link to info on swaps of the platform.

  Product order | Platform, language Exchange

  If you want to try to contact Adobe support to try to get an exception, Start here after selecting the relevant answers, choose "still need help? Contact us. "and the option to contact (or phone) CAT.

• Upgrade the database to 8i and 9i and 10g and 11g

  Nice day
  
  Hi all
  
  Please can someone help me to get a good document for the upgrade of the database to upgrade the database to 8i and 9i and 10g and 11g include prerequisites and upgrade processes and after upgrading the process waiting for your response because it required required

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14238/TOC.htm

  Concerning
  Asif Kabir

• Problem with WSUS after upgrade of SQL and SCCM

  A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

  The WSUS administration console failed to connect to the WSUS server database.

  Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

  System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

  WARNING: The join order has been applied because a local join hint is used.
  Source .Net SqlClient data provider
  Stack trace:

  to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

  at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

  I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

  I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

  Hello

  This community is for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  SQL Server TechNet forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Document for the upgrade of database ebs spot

  
  Hello

  Can someone point out to me a document that gives the steps to out place upgrade database ebs 12.1.3 11.1.0 to 11.2.0.3? I tried it myself and it went well but I still don't know if something is still missing because there are still 346 invalid objects in the comic book. Here are the steps I followed:

  On the source:

  Start adpreclone

  2 run utlu112i.sql (copy it from the 11.2.0). House)

  Follow the recommendations of utlu112i.sql.

  Back up the db of the source and the apps folder

  Copy the backup on the target server.

  6 copy the pfile.

  7.

  On target:

  install the 11.2.0.3 software

  apply the required patches

  Restore and recover the database.

  catupgrd.sql run

  Start catuppst.sql;

  Start utlrp.sql;

               run d bupgdiag. SQL

  run adconfig.sh contextfile = < contextfile > level db.

  Stop listener and database and restart to load the new approx.

  restored apps folder (backup of the source)

               run adcfgclone.pl appsTier

  run autoconfig.

  Kind regards

  Vinod

  Hi Vinod,

  Please find some off-site links update:

  DATABASE UPGRADE 11.1.0.7 to 11.2.0.3 DATABASE WITH R12.1.3

  See also the forum as it's been discussed on several occasions.

  Have BTW, regarding your invalid objects you tried recompiling of the objects by using:

  1 adadmin > schema compilation apps

  2. connected in sysdba > run @$ORACLE_HOME/rdbms/admin/utlrp.sql

  Best regards

• Upgrade of database using Data Pump

  Hello
  
  I'm moving my database to a Windows 2003 server to Windows 2007 server. At the same time I get to level this database from 10g to 11 g 2 (11.2.0.3).
  so, I use the export / import method of upgrade (via Data Pump not the old exp/imp).
  
  I have exported successfully by the source database and created the empty shell ready to take import database. However, I have a couple of queries
  
  Q1. with regard to all objects in the source database SYSTEM. How they will import as target the new database already has a SYSTEM tablespace
  I guess I need to use the TABLE_EXISTS_ACTION option for import. However should I set this Append, SKIP, REPLACE or TRUNCATE - which is best?
  
  Q2. I intend to slightly modify the directory structure on the new database server - it would be preferable to pre-create the tablespaces or leave that to import but use the REMAPPER DATAFILE option - what is all the world experience to know what is the best way to go? Once again if I pre-create the tablespaces, how should I inform the import to ignore the creation of the tablespaces
  
  Q3. These 2 databases are on the same network, so in theorey instead of a manual export, copy of the dump for the new server file, then import, I could use a link to network for import. I was wondering where it all stupid this method using the explicit export dump file?
  
  Thank you
  Jim

  Jim,

  Q1. with regard to all objects in the source database SYSTEM. How they will import as target the new database already has a SYSTEM tablespace
  I guess I need to use the TABLE_EXISTS_ACTION option for import. However should I set this Append, SKIP, REPLACE or TRUNCATE - which is best?

  What if all you have is the basic database and nothing created, then you can do the full = y. In fact, it is probably what you want. The system tablespace will be there then when Data Pump attempts to create, it will fail just as the create statement. Anything else will fail. In most cases, your system tables will already be there, and that's ok too. If you import schema view, you will miss out on some of the other things.

  Q2. I intend to slightly modify the directory structure on the new database server - it would be better to pre-create the tablespaces or leave cela import but use the REMAPPING > DATAFILE option - what is everyones experience to know what is the best way to go? Once again if I pre-create the tablespaces, how should I inform the import to ignore the creation of the tablespaces

  If the directory structure is different (which they usually are), then there is no easier way. You can run impdp but with sqlfile and you can tell - include = tablespace. This will give you all orders of tablespace to create in a txt file and you can edit the text file to change what you want to change. You can tell datapump to ignore the creation of tablespace using--exclude = tablespace

  Q3. These 2 databases are on the same network, so in theorey instead of a manual export, copy of the dump for the new server file, then import, I could use a link to network for import. I > I was just wondering where it all with this method using the explicit export dump file?

  The only con might be if you have a slow network. This will make it slower, but if you need to copy the dumpfile on the same network, then you will always see the same basic traffic. The benefits are that we should not have additional disk space. Here's how I look at it.

  1. you have XX GB for the source database
  2. you are looking for the source dumpfile YY GB
  3. you must YY GB for the dumpfile target that you copy
  4. you have XX GB for the target database.

  By network get rid if YY * 2 GB for the dumpfiles.

  Dean