Upgrade of IDS S34

Similar Questions

• Memory required for the upgrade of IDS Sensor 4.1 (5) to 5.0 (IPS)

  pls tell me the desired memory minimum for the sensor IDS version 4.1 upgrade (5) to version 5.0 (IPS)

  Detectors of the series 4200 ID must be at least 512 MB for this upgrade to 5.0.

  Read the release notes for more information:

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/prod_release_note09186a008045ab52.html

  I hope this helps. all the best... the rate of responses if deemed useful...

  Concerning

  REDA

• Upgrade of IDS 4250 problem

  I am currently having IDS-K9-sp - 5.0 - 2.2 and make "... the file name is not a file type of upgrade valid." every time when I upgraded with ftp to download 'IPS - K9 - 5.1 - 6 - E1.pkg' or 'IPS-K9-cd-1.1-a-5.1-6-E1.iso '. What is the image of the correct upgrade system that I need to download?

  Have you tried upgrading to 5.1 (1) first, then 5.1 (5)? If you upgrade the CLI, the .pkg file is what you want. The .iso image file is used to create a bootable CD (some sensors may not a CDROM drive) to retrieve the sensor.

• Resource needs memory IDS 4210 CODES signature updates

  I have ID 4210, see the version is displayed as follows:

  ID # sh ver

  Application partition:

  The Cisco Systems Version 1.0000 S37 Intrusion detection sensor

  2.4.18 OS version - 5smpbigphys

  Platform: IDS-4210

  With the help of 257458176 of 261312512 memory available bytes (98% of use)

  With the help of 1.1 G off bytes 17 G of disk space available (7% of use)

  I want to pass that ID to IDS - GIS - 4.1 - 4 - S100.rpm.pkg, but readme indicates firstly that I have to upgrade to Version 4.1 (1) S47 of 3,0000 S61 sensors must be updated with the 4.1 (4) S91 Service Pack before you apply the 4,0000 S100 Signature Update.

  Review of information, in order to upgrade to version 4.1 (1) S47, documentation also says IDS-4210 and IDS-4220 sensors of the series should be upgraded to 512 MB of RAM using a Cisco upgrade kit (part # ID - 4210 - MEM - U or ID-4220-MEM-U) until they can be upgraded with IDS software version 4.1 or later. This update is free for visitors with SMARTnet.

  Please let me know if, depending on the version of my show, I already have the memory requirements.

  Thanks for any help,

  To upgrade 4 - 4.1 - S100 just to first upgrade to version minor update 1.0000 1.0000 S37, followed by service pack 4,0000 S91 S47. Do not apply 4.1 (2) and 4.1 (3) before applying the 4.1 (4), 4.1 (4) is a service pack is cumulative.

  Your show version, looks like you have not upgraded to to the 512 MB of ram required. Once that you upgrade to the 512 MB version show should show something like

  With the help of 452706304 of 509276160 memory available bytes (88% of use)

  Hope this helps

• The upgrade of Cisco IDS 4235

  Currently, we are conducting 5.1.3 GIS 257. I know I'm behind and want to also include DST updates. If I switch to 5.1.4 or 5.1.5 What is the version that I will need to upgrade to these Service Packs? 5.1.3's 257 enough?

  Thank you

  Dwane

  You can go to 5.1. (5) .. minimum required for this upgrade is 5.0 (1) for users of CLI and IDM. This Service Pack includes the update of the Signature S272. With regard to the IDS/IPS devices, its always preferable to run on the latest versions.

  Kind regards

  Maryse.

• Ontario Regulation the upgrade of Version 4.0 of Cisco IDS to 5.0

  Dear Happs / marcabal

  I have one of the IDS 4215 4.1 (1) Version with the details attached. I want the same thing to 5.0 and 6.0. So I install the 5.0 (1e) S149 major to upgrade to 5.0 first release

  The following is written in the read me file for the package of service IPS-K9-maj-5.0-1e-S149.rpm.pkg

  "For ID-4215, you must also make sure that you have upgraded the BIOS to the version.

  5.1.7 and the ROMMON version 1.4 "

  So I downloaded the upgrade utility mentioned above; However, I need to know following

  (1) how to check the current BIOS and the ROMMON Version in ID

  2) to upgrade the BIOS and ROMMON Version, can I do my dekstop (Windows XP) as a server TFTP we manage remote (LINE of LEASE), customer IDS, or do I need to have a local instead of customers himself (in the cisco IDS network beach only) which can be made as TFTP server

  (3) also please let me know how do I know the IDS 4.0 license and if no license is available then, can still update us to version 5.0?

  There is no version 4.x license, licenses began only in version 5.0.

  You can improve your 4215 to version 5.1 or 6.0 unlicensed.

  The minimum versions of BIOS update and forms are easily searched on CCO.

• The upgrade IDSM2 and IDS 4235

  I have 12 IDSM2 and 4 ID 4235 managed through VMS, I configured the automatic download of updates of signature but I noticed that S189 was missed.

  Is it possible to apply the latest Service Pack 4.1.5 virtual machines? If so should I just upload the file to the correct directory and apply it as a normal signature update or what method should I use? I need to centrally manage the update process because my IDS systems are all landlocked.

  Thanks for your help,

  Chiara

  VMS has the ability to push updates to the sensor. Updates include service packs, minor versions and updates of the signature. You're right in that VMS uses .zip files to update the sensors. If you use the .pkg file VMS will be error on it towards the sensor.

  Thank you

• Just upgraded to Ultimate, need help of activation, wants to produce different IDS?

  I've just upgraded to Ultimate, need help of activation, wants the different product ID?

  If upgraded using Anytime Upgrade, which means that the product key is already entered, the only thing you need to do is to activate by phone.

  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

• I try the installation key OEM Office or upgrade to another version of Vista

  Hi, I had the same problem here.

  until someone shows me at the door, shouting that I have tried the vista OEM key to install office or upgrade to another version of vista, here are the facts:

  -C' is my work laptop.
  -It was installed with a volume work XP pro license.
  -J' changed jobs, negotiated to keep my laptop in the process.
  -I'm legitimate, I don't want the volume from my previous job license.
  -I am reloading the preinstalled version of vista from the CD supplied with the notebook microsoft (not the CD before installing, I wanted a windows clean and neat)
  -L' label on the back of the PC say "vista home premium OEMAct".
  -I am running windows vista Home premium
  -J' I updated my bios to the latest version
  -vista will not activate automatically.
  -J' tried to call microsoft for manual activation. the IDS are recognized (if you try to enter a wrong number, it is said that there is a mistake), but when I hit "next" after having typed the ID told me on the phone, I get an error indicating that the code is wrong.

  a now I get the Activation Assistant 0xC004E002 error when I try to run it.

  I don't see what I did wrong... someone has a lead what to do next, other than reinstalling windows?
  I don't want to bother to reinstall all drivers and applications (openoffice, java, firefox, xnview, avira antivir...) that I just installed.
  And I want a working solution, as I am not really convinced that reinstall windows don't lead me to the same problem on new.

  Thanks in advance.

  Best regards
  hateshinai.

  Post edited by: hateshinai

  Hello

  First of all-> you have a Toshiba laptop?
  If so,-> to the Vista preinstalled on your laptop is already activated!

  The key at the bottom of the device belongs to the OEM of Vista version and it is just a confirmation that you are using a legal Vista operating system.
  The key cannot be used with MS Office and other versions of Vista!

  If you want to upgrade the Vista then you will probably get a new key from Microsoft.

• G6-1c35dx gone after upgrade Windows network adapter Pavilion

  Hello - I tried to upgrade my laptop Win 7 Edition home premium to Win 7 Professional from a CD.  It wouldn't let me, so I did a full install. When windows finally came, I was unable to connect to the internet.  I did some research and found other similar issues. We had exactly a problem, but for some reason I can't access the url for its solution. Here's what I tried to use:

  SM Bus controller
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96948-1&cc=us&DLC=en&LC=en&...
  
  PCI Simple Communications controller
  
  It's either this one:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97194-1&cc=us&DLC=en&LC=en&...
  
  or this one...
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97081-1&cc=us&DLC=en&LC=en&...
  
  Install this driver if you have not already done so.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97190-1&cc=us&DLC=en&LC=en&...
  
  Ethernet controller:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-1&cc=us&DLC=en&LC=en...
  
  Network controller:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-1&cc=us&DLC=en&LC=en&...
  
  PCI device:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-1&cc=us&DLC=en&LC=en...

  And here's my devices with problems & their equipment identification numbers:

  Ethernet controller
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1695103C & REV_05
  
  Network controller
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  
  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1695103C & REV_01
  
  PCI Simple Communications controller
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1695103C & REV_04
  
  SM Bus controller
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1695103C & REV_05

  Help, please!

  Hi Davis,.
  
  For the hardware IDs you mentioned,
  Download, save & install one by one each of the drivers below in ORDER, system reboot after each installation is performed:
  
  Intel chipset:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96948-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Intel Management Engine Interface:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-97194-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Ethernet:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100084-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Network controller:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96646-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Card reader:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100083-2&cc=us&DLC=en&LC=en&OS=4063&product=5182647&sw_lang=
  
  Restart, check.
  
  Source: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5182647#N3675
  
  Concerning
  
  Visruth

• Lack of local groups of SQL Server service causing my upgrade failed... (SQL2008R2 to SQL2014) emergency assistance

  Hi all
  I have problems with the upgrade of SQL Server 2008 R2 at SQL2014 with the error "no mapping between account names and security IDS was done" and the reason for the error is SQL server local groups that were created during installation (SQL2008 R2) are not on the local server groups.
  Can anyone help identify the good fix for this problem?
  SQLServerMSSQLUser$$MSSQLSERVER
  SQLServerSQLAgentUser$$MSSQLSERVER
  SQLServerReportServerUser$$MSRS10_50.MSSQLSERVER
  SQLServerFDHostUser$$MSSQLSERVER
  Please let me know if you need any further details.
  Thank you
  Naz
  S/N

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When upgrading to Windows XP SP3, Windows 7, it loads the temporary files, and then I got an error message saying "the install.wim file does not exist.

  When the upgrade of xpsp3 for win 7 it loads the temporary files and 1 min in step 2? "" departure ": an error message appears that says install.wim file does not exist?

  original title: problem installing win 7

  Hello

  You can't upgrade Windows XP to Windows 7.

  Windows 7 upgrade paths

  This document describes the upgrade paths that are supported and not supported for editions of the Windows® operating system 7.

  Unsupported upgrade scenarios

  • Upgrade to Windows 7 from the following operating systems is not supported:
  • RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS
  • Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2
  • Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.
  • Place of cross-language upgrades (for example, en - us en - us) are not supported.
  • Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
  • Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.
  • Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.
  • Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

  Supported upgrade scenarios

  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  Enterprise	Enterprise
  Home Basic	Home Basic
  Home Premium	Home Premium
  Professional	Professional
  Starter (x 86 only)	Starter (x 86)
  Ultimate	Ultimate

  Home Basic	Home Premium, professional, ultimate edition
  Home Premium	Professional, ultimate edition
  Professional	Ultimate
  Starter	Home Premium, professional, ultimate edition

• I want to upgrade from Windows 98 to Windows 7?

  I want to know if I can upgrade from windows 98 to windows 7? I know it's an old operating system and all but I need an update. Can I up to date? With or without him I can internet on it?

  No, you can not Windows 7 requires Windows XP or Vista as a product calling. If you do not, you will need to purchase a full version of Windows 7:

  http://www.Microsoft.com/Windows/buy/default.aspx
  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  Upgrade to Windows 7 from the following operating systems is not supported:

  ·      RTM of Windows 95, Windows 98, Windows Millennium Edition, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS

  For more details, see the link http://technet.microsoft.com/en-us/library/dd772579 (WS.10) .aspx Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• 4.1 > IPS failed 5.0 upgrade

  4235 ID meets all requirements.

  Repeatedly, the upgrade fails with the following error message:

  #BEGIN # SNIP #.

  Root broadcast message (Thu May 26 17:39:20 2005):

  The application update IPS-K9-maj-5.0-1-S149.

  Close all processes of the CIDS. All connections will end.

  The system will be rebooted at the end of the update.

  Root broadcast message (Thu May 26 17:39:29 2005):

  Conversion in config error. Abandoned facility.

  Error: CIDS 5.0 Validation error: "service host" Config point: summerTimeZoneNam «»

  e' reason: the string, *, does not match the required pattern

  Error was: - to validate the current config -: validate the error for the 'host' component and

  the Forum «»

  / Summertime-option/recurring/Summertime-zone-Name /-the value is empty and has

  no default value

  # #END SNIP #.

  > Sh worm out >

  Application partition:

  The Cisco Systems Version 4,0000 S138 Intrusion detection sensor

  2.4.18 OS version - 5smpbigphys

  Platform: IDS-4235

  With the help of 841523200 of 921522176 memory available bytes (91% of use)

  2.4 G using out-of-bytes of 15 G of disk space available (17% of use)

  MainApp to 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  AnalysisEngine 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Authentication 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Recorder 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  NetworkAccess 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  TransactionSource 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  Webserver 2004_Apr_15_15.03 (liberation) 2004-04-15 T 15: 11:59 - 0500

  Unning

  2004_Apr_15_15.03 CLI (release) 2004-04-15 T 15: 11:59 - 0500

  Upgrade history:

  * ID - sig - 4.1 - 4-S114 14:48:53 UTC Tuesday, March 1, 2005

  ID - sig - 4.1 - 4 - S138.rpm.pkg 15:14:30 UTC on Tuesday, 1 March 2005

  Version 1.2 - 1, 0000 S47 recovery partition

  any ideas?

  V5 is a lot more about correct configurations that v4 was, which is why some things than v4 that slide will produce an error during upgrade to v5. Obviously there is something in your time zone settings that he allowed to v4, but like v5.

  A conf "sho" on your sensor v4 and near the top of the page (just after the IP addresses), check all do in the section "timeParams". My guess is you have some parts here, but at the very least, you have not defined a DST zone name. You can set everthing correctly under here by running "setup" in the CLI, and when it asks you if you want to "Change the system clock settings" answer Yes and work your way through the guests. Then try the upgrade again and let us know how you go.

  If the error persists, please cut and paste your timeParams section and we'll see what happens.

• Network IDS Sensor/system and retrieval of Images

  Ok.. on this page:

  http://www.Cisco.com/Kobayashi/SW-Center/ciscosecure/IDs/crypto/

  Objective: I want to burn an image from the Images "system and recovering" rather than order a CD from recovery for IDS.

  Issues related to the:

  1 is it possible or not that you must order the recovery CD?

  2. I see that the files under 'System and recovery Images' are in the format tar.pkg. Is this based on Linux or Solaris? Can I use Red Hat Linux to extract this file and then burn it to a CD?

  3. If so, is - anyone know how to extract the file?

  -TKS.

  Answers:

  (1) No, you must order the recovery CD.

  (2) there are 2 types of files: System and recovery.

  The system Images (- sys-) are used only for the installation of sensors that support ROMMON (like the 4215 IDS, IPS-4240 and IPS-4255). The sensors supporting ROMMON have no CDROM drives, and so the image must be tftpd to the sensor through ROMMON.

  System Images are used for recovery after disaster where the compactflash/hard disk from the sensor has been severely damaged or a new white compactflash/hard disk was placed in the sensor.

  Recovery (r) - Inages updated only the probe recovery Partition. They must be installed from a running Application Partition. The .pkg is a special Cisco IDS application-specific extension. There are special methods for unpacking and installation of the unerlying files.

  In ordinary situations the user will constantly update their software to sensor by the normal process of upgrade using large updates (- shift-), minor updates (- min-), Service Pack (sp) - or Signature updates (-- GIS).

  It isn't that where the effective Partition becomes corrupt that a user must always start on the recovery Partition and load a new Partition of Application.

  Most of the users will never update their recovery Partition. Thus, users who have purchased the IDS-4235 for example with the 4.0 software (1) will be a 4.0 (1) recovery Image. If they later upgraded to 4.1 (1) and the experience of corruption then they can always start the recovery Partition and reload 4.0 (1). If they do not want to return to 4.0 (1) provide us a recovery Image to update the Partition recovery to 4.1 (1).

  The only time wherever a recovery CD is really necessary is when the user goes from 3.x, 4.x, because of the drastic change between the 2 versions, or if the recovery Partition has also been damaged, or if you use a blank hard drive.

  3.

  I don't think the recovery or System Images contains the files needed to create a recovery CD. If I just remember additional files have been added to the recovery CD to make it bootable, which were not necessary on the system image or recovery since they were based on a sensor that was already underway.