Upgrade of Oracle DB RAC/Clusterware 11.1.0.6 for 11.1.0.7
We currently have an installed Oracle and 11.1.0.6 with Clusterware running 11.1.06 and we have been informed by one of our suppliers to perform an upgrade for 11.1.0.7. I had a few questions regarding the upgrade process because I do not found the answers in reading me on the site.1. in the read me section it is this statement «The Oracle Clusterware software must be at the same or more recent than the software Oracle Oracle RAC Oracle home or home ASM.» Therefore, you should always pass Oracle Clusterware before you upgrade Oracle RAC or Oracle ASM. This patch does not allow to upgrade Oracle RAC or ASM Oracle before you upgrade of Oracle Clusterware. »
When I did the installation I downloaded 11g Release 1 and Clusterware 11 g release 1. Now, I know that the patch is for 11.1.0.7 database, this means that it is an inclusive to Clusterware? I tried to search in metalink in the "Fixes and upgrades" section for an 11.1.0.7 upgrade for RAC, but did not find anything.
2. I plan to do this update on Saturday, while we have minimal connectivity. Can I still upgrade spread from the DSO even if we will have little to no connectivity?
3. can I just use the dbca utility to upgrade the database or is it better to manually update each individual database, because I am running Clusterware.
I apologize if these questions are generic, but I wanted to just make sure that I understand very well what I'll do.
If I understood your question correctly then yes it's true that the clusterware version must be at the level even of the Oracle RDBMS / ASM houses in this cluster. The same group of fixes is applicable for Clusterware, ASM, and RDBMS and YES will modernize the binary relevant according to your selection of ORACLE_HOME, while applying to this group of patches using YES. It's the beauty of Oracle RAC that it allows you to perform the upgrade of the Clusterware and ASM then why not use it because it allows to avoid downtime. In your case if you can afford downtime, then it must be your choice to not use it. I recommend using dbua upgrade the database because he takes care of everything that is necessary to upgrade the database.
See you soon
ORAXperts
Tags: Database
Similar Questions
-
upgrade to oracle 9i to Oracle 11 g RAC RAC
Hi all
version of DB: oracle 9.2.0.5 RAC
OS: Linux
My project team and the customer plans to upgrade oracle 9i RAC to Oracle 11g RAC.
Please suggest any MOS notes all the links.
Thank you
Visu.
Published by: visu996253 on 8 April 2013 05:30version of DB: oracle 9.2.0.5 RAC
OS: LinuxMy project team and the customer plans to upgrade oracle 9i RAC to Oracle 11g RAC.
Please suggest any MOS notes all the links.Note to master for the upgrades of Oracle database and migration [ID 1152016.1]
http://www.Oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - companion of oracle 11g upgrade
http://download.Oracle.com/docs/CD/E11882_01/server.112/e17222.PDF - Guide to upgrade the database® Oracle 11 g Release 2 (11.2) E10819-02Published by: KR10822864 on 8 April 2013 05:52
Add more information. -
Oracle 9i Rac (9.2.0.6) on Windows Server 2003 Ent. SP2 (with latest Windows patches).
FCAC consist of 2 nodes, install based on Metalink Note: 178882.1, then the facility I ran into a few bugs, but the clustercheck said ok, the tracks of services very well now, two of them (clustercheck, servers) see the storage, each other etc. Storage is an EVA6400, and I intend to use ocfs under database files.
(The reason why I'm installing 9i RAC: we have an old 9i RAC database, and I want to change the very old hardware (servers and storage too).) My plan is to install RAC, create a blank database and import the data from the old to the new.)
The problem is, when I start DBCA (dbca - datafileDestination O:\oradata > c:\dbca_result.txt) and set up a rac database, the process of creating crashes to 2%...
*****
On the first node, an alert.log is created:
C:\oracle\admin\pir\bdump\alert_pir1.log dump file
Fri 25 Sep 11:13:32 2009
ORACLE V9.2.0.6.0 - Production vsnsta = 0
vsnsql = 12 vsnxtr = 3
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Fri 25 Sep 11:13:32 2009
Starting ORACLE instance (normal)
Fri 25 Sep 11:13:32 2009
The global resources of Enqueue Service = 64, pool = 4
Fri 25 Sep 11:13:32 2009
Global Enqueues Enqueue service = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Window SCN 2
Using the default for the log_archive_dest parameter value
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning ORACLE RDBMS Version: 9.2.0.6.0.
Parameters of the system with default values:
process = 150
TIMED_STATISTICS = TRUE
shared_pool_size = 50331648
LARGE_POOL_SIZE = 8388608
JAVA_POOL_SIZE = 33554432
control_files = O:\oradata\PIR\control01.ctl, O:\oradata\PIR\control02.ctl, O:\oradata\PIR\control03.ctl
DB_BLOCK_SIZE = 8192
db_cache_size = 25165824
compatible = 9.2.0.0.0
db_file_multiblock_read_count = 16
cluster_database_instances = 1
= 1 thread
fast_start_mttr_target = 300
instance_number = 1
UNDO_MANAGEMENT = AUTO
undo_tablespace = UNDOTBS1
UNDO_RETENTION = 10800
Remote_login_passwordfile = EXCLUSIVE lock
db_domain =
instance_name = PIR1
dispatchers = (PROTOCOL = TCP) (SERVICE = PIRXDB)
LOCAL_LISTENER = LISTENER_PIR1
remote_listener = LISTENERS_PIR
JOB_QUEUE_PROCESSES = 10
hash_join_enabled = TRUE
background_dump_dest = C:\Oracle\admin\PIR\bdump
user_dump_dest = C:\Oracle\admin\PIR\udump
core_dump_dest = C:\Oracle\admin\PIR\cdump
sort_area_size = 524288
db_name = PIR
open_cursors = 300
star_transformation_enabled = FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 0
Fri 25 Sep 11:13:33 2009
cluster interconnect IPC version: Oracle 9i Winsock2 TCP/IP CPI
Proto IPC seller 0 0 Version 0.0
PMON started with pid = 2
DIAG started with pid = 3
LMON started with pid = 4
LMD0 started with pid = 5
DBW0 started with pid = 6
LGWR started with pid = 7
CKPT started with pid = 8
SMON started with pid = 9
RECCE has started with pid = 10
CJQ0 started with pid = 11
Fri 25 Sep 11:13:43 2009
commissioning or shared server 1...
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
Fri 25 Sep 11:13:44 2009
CREATE THE PIR DATA BASE
MAXINSTANCES 32
MAXLOGHISTORY 0
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE 'O:\oradata\PIR\system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT MAXSIZE 10240K UNLIMITED
LOCAL MANAGEMENT MEASURE
TEMPFILE TEMP 'O:\oradata\PIR\temp01.dbf' SIZE 40 M REUSE AUTOEXTEND ON NEXT MAXSIZE 640K DEFAULT TEMPORARY TABLESPACE UNLIMITED
UNDO TABLESPACE "UNDOTBS1' DATA file 'O:\oradata\PIR\undotbs01.dbf' SIZE 200 M REUSE AUTOEXTEND ON NEXT MAXSIZE 5120 K UNLIMITED
WE8MSWIN1252 CHARACTER SET
NATIONAL CHARACTER SET UTF8
LOGFILE GROUP 1 ("O:\oradata\PIR\redo01.log") SIZE 102400K REUSE,
GROUP 2 ("O:\oradata\PIR\redo02.log") SIZE 102400K REUSE
Fri 25 Sep 11:13:44 2009
LMON recorded with NM - 1 instance id (internal mem not 0)
Fri 25 Sep 11:13:45 2009
Reconfiguration began (old Inc. 0, new Inc. 1)
List of nodes:
0
Global Resource Directory frozen
partition of a node
Restored communication channels
Diffuse master hash resource bitmaps
Blocks of non-local process cleaned
Resources and cleaned enqueues
Remastered resources 0
Set of master node info
Subject to all requests for remote enqueue
Update variable rdomain
DWN-cvts replayed, questionable VALBLKs
All enqueues grant awarded
0 shadows crossed GCS, replayed 0, unopened 0
Subject to all requests for remote-cache GCS
Fri 25 Sep 11:13:47 2009
Reconfiguration complete
Post SMON start 1 IR pass
*****
And that's all. On the other node, the service was created, started, but no alert.log were created. I have 3 files to trace on the first node:
*****
pir1_diag_4664.TRC
C:\oracle\admin\pir\bdump\pir1_diag_4664.TRC dump file
Fri 25 Sep 11:13:34 2009
ORACLE V9.2.0.6.0 - Production vsnsta = 0
vsnsql = 12 vsnxtr = 3
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the options of Real Application Clusters, partitioning, OLAP and Oracle Data Mining
Release 9.2.0.6.0 - Production jserver
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Instance name: pir1
Redo thread mounted by this instance: 0 < none >
Oracle process number: 3
Windows thread ID: 4664, image: ORACLE. EXE
SESSION ID: (2.1) 2009-09-25 11:13:34.022
kjzcprt:RCV created port
The node ID: 0
List of nodes: 0,
11:13:34.038 2009-09-25
Reconfiguration beginning [leash = 0]
I'm the master node
11:13:34.054 2009-09-25
Reconfiguration full [leaves = 1]
*****
pir1_lmd0_5072.TRC
C:\oracle\admin\pir\bdump\pir1_lmd0_5072.TRC dump file
Fri 25 Sep 11:13:48 2009
ORACLE V9.2.0.6.0 - Production vsnsta = 0
vsnsql = 12 vsnxtr = 3
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the options of Real Application Clusters, partitioning, OLAP and Oracle Data Mining
Release 9.2.0.6.0 - Production jserver
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Instance name: pir1
Redo thread mounted by this instance: 0 < none >
Oracle process number: 5
Windows thread ID: 5072, image: ORACLE. EXE
11:13:48.335 2009-09-25
SESSION ID: (4.1) 2009-09-25 11:13:48.335
Open the lock on RM 0 0
*****
pir1_lmon_4740.TRC
C:\oracle\admin\pir\bdump\pir1_lmon_4740.TRC dump file
Fri 25 Sep 11:13:34 2009
ORACLE V9.2.0.6.0 - Production vsnsta = 0
vsnsql = 12 vsnxtr = 3
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the options of Real Application Clusters, partitioning, OLAP and Oracle Data Mining
Release 9.2.0.6.0 - Production jserver
Service Pack 2 for Windows 2000 Version 5.2, CPU type 586
Instance name: pir1
Redo thread mounted by this instance: 0 < none >
Oracle process number: 4
Windows thread ID: 4740, image: ORACLE. EXE
SESSION ID: (3.1) 2009-09-25 11:13:34.319
GES CPI: Shippers 1 1 receivers
GES CPI: Buffers receive 1000 Send (i: 100 b:100) reserve 100
GES CPI: Msg 420 lot 2048 regular size
Lot size msg = 2048
Factor of batch processing: enqueue replay ack 47, 52
Factor of batch processing: cache size 34 by lock 56 replay
11:13:44.538 2009-09-25
kjxggin: receive buffer size = 32768
kjxgmin: SKGXN worm (1 of 2 CM of reference Oracle 9i)
11:13:44.554 2009-09-25
kjxgmrcfg: Reconfiguration began, reason no. 1
kjxgmcs: set state 0 0.
11:13:44.554 2009-09-25
Name service frozen
kjxgmcs: status to 0 1.
kjfcpiora: publish my weight 3000
kjxgmps: offers the subreport 2
kjxgmcs: definition of State 1 2.
The verification of identity unique instance
kjxgmps: offers the 3 subreport
kjxgmcs: status at 1-3.
Recovery of Service names started
Remove all entries by name of instance-dead
kjxgmps: offers the subreport 4
kjxgmcs: status 1 4.
Multicasts all entries from local to publish name
Reread all the pending requests
kjxgmps: offers the subreport 5
kjxgmcs: status at 1-5.
Name the normal Service
Recovery of Service names made
11:13:44.788 2009-09-25
kjxgmps: offers the subreport 6
kjxgmcs: status 1 6.
11:13:45.007 2009-09-25
11:13:45.007 2009-09-25
Reconfiguration began (old Inc. 0, new Inc. 1)
Synchronization time-out interval: 600 s
List of nodes:
0
Global Resource Directory frozen
node 0
9 2 0 6 output
* kjshashcfg: I'm the only one node of the cluster (node 0)
Active Sendback threshold = 50%
Restored communication channels
Diffuse master hash resource bitmaps
Blocks of non-local process cleaned
Resources and cleaned enqueues
Remastered resources 0
Set of master node info
Subject to all requests for remote enqueue
Update variable rdomain
DWN-cvts replayed, questionable VALBLKs
All enqueues grant awarded
11:13:46.241 2009-09-25
0 shadows crossed GCS, replayed 0, unopened 0
Subject to all GCS cache requests
11:13:47.335 2009-09-25
Reconfiguration complete
Post SMON start 1 IR pass
*****
When I started the dbca to the other node, the same thing happens... Anyone have an idea why block my dbca process? Y at - it of other logs I can check?
The Journal dbca is really huge (129 k), I found no errors in there, it's the last lines are:
[Thread-9] [13:41:9:918] [SQLEngine.setSpool:1462] old coil = null
[Thread-9] Setting spool [13:41:9:918] [SQLEngine.setSpool:1463] = C:\Oracle\admin\PIR\create\CreateDB.log
[Thread-9] [13:41:9:918] [SQLEngine.setSpool:1464] is the editable coil? -> false
[Thread-9] [13:41:9:934] [DBEntryStep.executeImpl: Compile] undoMgmt = AUTO
[Thread-9] [13:41:9:949] [DBEntryStep.executeImpl: Compile] undoMgmt = true
[Thread-9] Instances.length = 2 [13:41:9:949] [DBEntryStep.executeImpl: Compile]
[Thread-9] [13:41:9:949] [DBEntryStep.executeImpl: Compile] = UNDOTBS1 undoTBS
[Thread-9] [13:41:9:949] [DBEntryStep.executeImpl: Compile] update cluster_database
[Thread-9] [13:41:15:715] [DBEntryStep.executeImpl: Compile] undoTBS create SQL = DATA file to CREATE TABLESPACE UNDO "UNDOTBS1' 'O:\oradata\{DB_NAME}\undotbs01.dbf' SIZE 200 M REUSE AUTOEXTEND ON NEXT 5120 K MAXSIZE UNLIMITED
[Thread-9] [13:41:15:715] [DBEntryStep.executeImpl: Compile] redoLogText 0E = GROUP 1 ("O:\oradata\{DB_NAME}\redo01.log") SIZE 102400 K REUSE
[Thread-9] [13:41:15:715] [DBEntryStep.executeImpl: Compile] 1st = GROUP 2 ("O:\oradata\{DB_NAME}\redo02.log") redoLogText SIZE 102400 K REUSE
[Thread-9] [13:41:15:715] [DBEntryStep.executeImpl: Compile] CREATEDB SQL = CREATE PIR of the DATABASE
MAXINSTANCES 32
MAXLOGHISTORY 0
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE 'O:\oradata\PIR\system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT MAXSIZE 10240K UNLIMITED
LOCAL MANAGEMENT MEASURE
TEMPFILE TEMP 'O:\oradata\PIR\temp01.dbf' SIZE 40 M REUSE AUTOEXTEND ON NEXT MAXSIZE 640K DEFAULT TEMPORARY TABLESPACE UNLIMITED
UNDO TABLESPACE "UNDOTBS1' DATA file 'O:\oradata\PIR\undotbs01.dbf' SIZE 200 M REUSE AUTOEXTEND ON NEXT MAXSIZE 5120 K UNLIMITED
EE8MSWIN1250 CHARACTER SET
NATIONAL CHARACTER SET UTF8
LOGFILE GROUP 1 ("O:\oradata\PIR\redo01.log") SIZE 102400K REUSE,
GROUP 2 ("O:\oradata\PIR\redo02.log") SIZE 102400K REUSE
*****
Any help would be appreciated...
Thanks for your reply,
Tamas Taller
Hungary
Published by: lobonc on 25 Sep 2009 05:21I know that this kind of situation, important people will say that, upgrade - impossible! I can understand - depending on the application - it can be a major problem for upgrade to a higher version. But what is the difference between 9.2.0.6, 9.2.0.7? Bug fixes, but no change in characteristics. Why should the application stop working? To be honest I don't know if 9.2.0.7 (or even better 9.2.0.8) will solve your problems, but at least you would have an environment, which has BEEN supported in the past.
I think that the community here can give you some other answers, support Oracle would have done the same thing.Werner
-
Device feature feature ceased after the upgrade of oracle MAF 2.2.1
Hello
My Google maps, messaging features stopped after that I upgraded the Oracle of the MAF from 2.1 to 2.2.1.
Thank you
Diattou
For the plan, it could be number 2 in the problems here:
How you connect to the server?
You specify the server connection using http somewhere? You will probably need to change to be https instead.
See migration notes here - https://blogs.oracle.com/mobile/entry/oracle_maf_2_2_1
-
Installing oracle 11g (RAC) on RHEL 6
Dear all,
Me and my team will install oracle 11g (RAC) on RHEL 6.
About mention above I have little doubt it please help me out in this matter.
In the network section.
Requirement of intellectual property:
1 public IP address
2 private IP
3. virtual IP address
Suppose we have two interfaces in each server, eth0 and eth1.
I put the public IP address in eth0 192.9.25.100 and private 10.79.1.100 eth1 IP address
Now where put the virtual IP address and what is the procedure.
Please help me to set the virtual IP address
Thanks and greetings
Yvon Das
S/n, Guwahati
Published by: Yvon on 23 May 2013 23:44Hello
See the message below:
http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-Oracle-Linux-6-using-VirtualBox.php
If you need clarification update here.
Thank you
A H E E R X -
Upgrade of Oracle 9.2.0.5 to 10.2.0.4
Hello
Me once again
We are migrating to Oracle 9.2.0.5 to 10.2.0.4, steps that are performed and we are on the catupgrd.sql of execution, but the script will stop with the following message: (please help) (S.O. AIX) (the upgrade is manually)
SQL > / * save schema statistics
SQL> / * ---------------------------------------------- ----------------------------*/
SQL > declare
2 STATSXSD VARCHAR2 (4000): =.
3 ' < scheme xmlns = "http://www.w3.org/2001/XMLSchema".
4 xmlns: xdb = "http://xmlns.oracle.com/xdb."
5 xmlns: st = "http://xmlns.oracle.com/xdb/stats.xsd."
6 targetNamespace = "http://xmlns.oracle.com/xdb/stats.xsd."
7 elementFormDefault = "qualified" >
8 < simpleType name = "OIDType" > < base maxLength = "hexBinary" > < restriction value = "32" / > < / restriction > < / simpleType >
9 = xdb:columnProps "stats_pk constraint < name of the MAIN element"ContainerStats"KEY (xmldata. =" RESOID)"> xdb:defaultTable =" XDB$ STATS»
10 < complexType >
11 < sequence >
12 < element name = "TotalRows" type = "double" / >
13 < element name = "TotalContainers" type = "double" / >
14 < element name = "X" type = "integer" / >
15 < element name = "ImmediateContainers" type = "integer" / >
16 < element name = "LastAnalyzedDate" type = "dateTime" / >
17 < / sequence >
18 < attribute name = "ResOid" type = "st:OIDType" xdb:SQLName = "RESOID" / >
19 < / complexType >
20 < / item >
21 < / schema > ';
22
23 STATSURL VARCHAR2 (2000): = "http://xmlns.oracle.com/xdb/stats.xsd";
24 whole n;
start at 25
26 select count (*) from xdb.xdb to $ n s diagram
27 WHERE s.xmldata.schema_url = 'http://xmlns.oracle.com/xdb/stats.xsd ';
28
29 cases (n = 0) then
30 xdb.dbms_xmlschema.registerSchema (STATSURL, STATSXSD, FALSE, TRUE,
31 FALSE, TRUE, FALSE, "XDB");
32 end if;
end 33;
34.
declare
*
ERROR on line 1:
ORA-03113: end of file on communication channel
SQL >
SQL > Rem clean Invalidated objects
SQL > @ xdbvlo.sql
SQL > Rem
SQL > Rem $ Header: xdbvlo.sql 01 - nov - 2004.13: 09:20 pnath Exp $
SQL > Rem
SQL > xdbvlo.sql Rem
SQL > Rem
SQL > Rem Copyright (c) 2002, 2004, Oracle. All rights reserved.
SQL > Rem
SQL > Rem NAME
SQL > Rem xdbvlo.sql - upgrade of validation XML DB after all objects
SQL > Rem
SQL > Rem DESCRIPTION
SQL > Rem of course objects are valid XML DB after upgrade.
SQL > Rem
SQL > Rem NOTE
SQL > Rem no
SQL > Rem
SQL > MODIFIED Rem (MM / DD / YY)
SQL > Rem pnath 25/10/04 - make the owner of the package SYS DBMS_REGXDB
SQL > Rem spannala 08/23/03 -Rem spannala 21/08/03 - revalidation of invalid patterns adding
SQL > Rem njalali 03/04/03 - njalali_xdbupg_catmet_main
SQL > Rem njalali 02/04/03 - created
SQL > Rem
SQL >
SQL > WHEN SQLERROR "exit";
SQL > EXECUTE dbms_registry.check_server_instance;
ERROR:
ORA-03114: not connected to ORACLE
Published by: Mauricio_mlarios on November 11, 2011 16:14Hello
Check the threads below:
Catupgrd.SQL
upgrade to oracle 9i to 10gThank you
A H E E R X -
problem with oracle 9i RAC privileges
Dear all,
I have an Oracle 9i RAC on AIX 5.3. I'm new to RAC environment.
Today, I tried to give unlimited tablespace to a TEST user.
But when I check dba_sys_privs nothing is there.
=========
SQL > alter the TEST user quota unlimited data;
Modified user.
Elapsed time: 00:00:00.01
Select the DEALER, the PRIVILEGE of dba_sys_privs where dealer = "RESTORE_BIL";
DEALER
-THE PRIVILEGE
CREATE TABLE RESTORE_BIL
RESTORE_BIL CREATE SESSION
===================================
He does not watch the unlimited storage space.
There a stupid question, but this is the second time I am facing problem. When I grant a privilege object/system to a user, the command works, but when I consistent, sometimes that privileges are a few times that they are not there.
Help, please.Unlimited quota! = Unlimited tablespace.
And granting of unlimited storage in my book is pure evil, which also allows to create objects in the SYSTEM tablespace, where everyone should stay out.
There is no problem that you never unlimited tablespace privilege and you shouldn't have done it. I would have fired you for it.
-------------
Sybrand Bakker
Senior Oracle DBA -
Hello
I plan to install the SOA, but need more than the database version 10.2.0.4. How to change Oracle Database Express Edition to (10.2.0.4 OR 11 g) release? Thank you!!Hello
I plan to install the SOA, but need more than the database version 10.2.0.4. How to change Oracle Database Express Edition to (10.2.0.4 OR 11 g) release? Thank you!!
My I know that the current version of your database?
Reference:
* 316889.1 - checklist complete for manuals upgrades to 10 g 2 *.
* 429825.1 - complete checklist for manual updates to GR 11, 1 material *.
* 837570.1 - complete checklist for manual updates to 11 GR 2 *.Thank you
A H E E R X -
Oracle 10g Rac (TAF)
Hello
I'm known for RAC env.
How to implement TAF in oracle 10g RAC approx.
and how do you know... and how conf (base & preconnect) services for which use them.
Thank you
KK
Published by: user603328 on June 20, 2010 12:02Before you configure TAF, you should know about TAF
If the instance fails, TAF allows applications to automatically reconnect to a different instance. The new connection will be identical to the original, but uncommitted, existing at the time of breaking transactions will be cancelled.
TAF can be configured to perform two types of failover: session and selectwith the resumption of the session, any uncommitted transaction will be cancelled, and the session will be linked to another instance, with the resumption of the selection, uncommitted transactions will be cancelled, the second will be connected to another instance and any select statement that was running at the time of the breakup will be rerun by the sesion again using the same RCS and recoveries lines will be rejected upward until the original request has failed. The Select statement will continue return the remaining rows to the client.
a TAF connection must be configured in the configuration file net tnsnames.oraOracle. In oracle 10.1 and higher, the DBCA services management page can generate appropriate TNS for the TAF entries.
To configure the TAF, the TNS entry should include a FAILOVER mode clause that defines the properties of the recovery as follows,
TYPE attribute defines the behavior as a result of a failure. Value: Session, select or none
Attributes of the METHOD--> when connections are made to the failover. Value: base or preconnect
ATTEMPTS--> number of times where a connection should be attempted before displaying an error.
DELAY--> the time in seconds between each connection attempt.
Reading Document Oracle,
http://www.Oracle.com/pls/db102/search?word=configure+TAF&PartNo=
-
Hi all
I have successfully upgraded to oracle 9i to oracle 10gR2.Is is it possible to downshift before version oracle 9i.
time that the process of decommissioning is he set up no comparability INIT.ora parameters we have to the conf?
Thank you
KKHello
Yes it is possible. You can review;
Compatibility matrix of Database Server Upgrade/Downgrade [ID 551141.1]
If the source database is 9.2.x then it can be downgraded to 8.1.7.3.0 (or higher)
If you want to downgrade your 9i database I would also advice to review the following:
Decommissioning of a database to previous version of Oracle
http://download.Oracle.com/docs/CD/B10501_01/server.920/a96530/downgrad.htm#1008177%20Concerning
-
Oracle 11g RAC can support 2 separate databases?
1. can you Oracle 11 g RAC support 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
2. Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
I'm leading a team for a project of 11g and appreciate the answers.
Thank you
Satish.Oracle 11g RAC will support the 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
YES
Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
YES
-
Hello
Recently, we have updated production company running on AIX 5 L of 10.2.0.1-> 10.2.0.4. There is little of siebel CRM applications where oracle 10.2.0.1 client was installed and these application using oracle client jdbc to connect to the database server.
I would like to know, claim we upgrade the oracle 10.2.0.1 client as well to the same group of patches from the database server (10.2.0.4).
do we have any Oracle recommendation for same? As this is a living environment and no results in loss of bussiness downtime.
Thanks in advance.Both your client software certified on the last group of patches, there is no reason do not improve the customer.
Nicolas.
-
Oracle 10g RAC - private interconnection on VLAN not routable private
There is in our data center existing Oracle 10g RAC configured with VLAN private interconnection managed by a different group of DBA.
We create a new, separate Oracle 10 g RAC environment to support our request.
When we discussed with our data center people to set up a local VIRTUAL private network for our CARS of interconnection, they suggest to use the same VLAN used by the other Oracle RAC configurations existing private. In this case the IPs of interconnection will be on the same subnet as the other Oracle RAC configurations.
For example, if
RAC1 with 2 nodes use 192.168.1.1 and 192.168.1.2 in the VLAN_1 for the Interconect, they want us to use the same VLAN_1 with interconnecting IP 192.168.1.3 and 192.168.1.4 to our 2 node RAC.
Share the same subnet on the same private VLAN for the interconnection of different configurations of RAC, supported?
Which will cause a drop in performance? This means the IPs of a RAC interconnect configuration is to pings from other RAC configuration.
Someone met with such purpose?
Could not find any info on it on Metalink.
Thank youYes
It is practically very doable... as you would have only 4 m/c in subnet ip... and it is much less than the public subnet that we should abstain from interconnection. -
I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7
It's my environment:
VM VirtualBox
OS: Linux to Oracle 7
RAM: 2G
CPU: 1 outlet | 2 carrots
OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.
Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure
Installation type: SServer tandalone.
The installation user: uid = 501 (oracle)
installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.
Put ASM implementation with Linux e/s Standard (No. ASMLib).
The virtual machine has 3 disks attached.
Features: / dev/sdb, / dev/sdc, / dev/sdd
I ran to related records:
# / bin / / dev/raw/raw1 gross/dev/sdb1
# / bin / / dev/raw/raw2 gross/dev/sdc1
# / bin / / dev/raw/raw3 gross/dev/sdd1
# raw - qa
/ dev/RAW/raw1: linked main 8, minor 17
/ dev/RAW/raw2: linked main 8, minor 33
/ dev/RAW/raw3: linked main 8, minor 49
Also, I have configured the following command to set permanent configuration:
#vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules
ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".
ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".
ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".
# set permissions on these discs for the owner of the Oracle user.
ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "
NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.
BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb
BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1
BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc
BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1
BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd
BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1
This happens whenever I restart the server.
But authorities are good when I run # ls - lrt/dev/raw/raw *.
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2
CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3
Problem: when running script $GRID_HOME/root.sh.
Adding Clusterware entries to inittab
ohasd could not start
Cannot start the Clusterware. Last 20 lines of the trace log alert:
2015 08-19 02:15:24.442:
[client (7260)] CRS-2101: the RSC has been formatted using version 3.
2015 08-19 02:15:28.238:
[client (7283)] CRS-1001: the OCR has been formatted using version 3.
ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4
failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install
Please help me.
Geraldo Peralta
Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931
Under the Options deprecated for Oracle RAC 11 g Release 2:
"Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »
Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/
HTH,
Brian -
How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.
How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.
The following versions of Microsoft Outlook are fully supported on Windows 7;
- Outlook 2003
- Outlook 2007
- Outlook 2010 (when it came out)
It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.
Previous versions
Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;- Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
- Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.
The info source:
http://www.MSOutlook.info/question/303t-4-2
Maybe you are looking for
-
I miss the favorite column of IE, having a single click by selection
A column of visible Favorites permanently on the left actually IE faster for me than Firefox.Any way to create a similar display of quick click in Firefox?
-
ZBook17: How can I keep my laptop switch mode 'sleep'
How can I keep my computer to switch into mode 'sleep'. At the moment, the screen turns off in a minute about. I adjusted all the settings of power, but nothing seems to help.
-
Need the original BIOS for Satellite A210 - 1AO PSAELE
Hi all! long in vain looking for the original BIOS for my satellite A210-1AO PSAELE-03Q00FRU (Vista32bit preinstalled). Unfortunately I've updated and laptop lost the ability to disable.VERY noisy DWD - ROM (TS-L632H) through the BIOS (but it worked
-
It happened once before, but I don't remember the solution. A few days ago started IE9 conventional if I want to save a file when I click on a video link. I want to happen is for Windows Media Player to view the video. I don't want to save on my co
-
Activation key Windows Vista already in use after reformatting?
Recently I had to reformat my PC twice, by the choice and the other due to a virus about a week later. Now, I try to activate my Windows Vista 32 - Bit Home Edition key. When I go to the screen and tap on activate Windows now it gives me an error tha