Upgrade of Windows 10 - battery not detected

Upgrade Windows 10 has left me with battery not detected laptop Aspire 5738. Already tried the reset of the coercive power, no luck. If I can't find a solution, I need to roll back to Windows 7 or be stuck with a portable desktop computer. Any ideas or suggestions?

Thanks to Alfin72 in the Windows 10 forum for a solution that worked:

'Please check if you can do a reset of the battery driver. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. »

The solution worked great!

I also ended up making a coercive power, then reset because it is now detected the battery but did not load. To do this, simply unplug everything (including the battery), power for 15 seconds button (you won't see anything happen), then reconnect and restart. After that windows will appear, give it another 30 seconds, then put battery back in. Now, it's all good!

Tags: Acer Laptops

Similar Questions

  • Equium A300D - 16 c - battery not detected after replacement

    I have an Equium A300D - 16 c. The original battery was shot while I bought a stack of real PA3727-1brs 12. I have put in the laptop, it seems to load, but in the corner, he always says no battery not detected even if its load on. When I leave the charger it says remaining unknown.

    I tried the usual stuff to go into Device Manager and uninstall control compliant apci and still he has not solved it self. I've also updated my bios to the newest one. I just wanted to know what could I do so I can see how much battery is left, and if the laptop can recognize I..

    Hello

    Is this a battery Toshiba of origin of an authorized service provider?

    Usually, the new battery should be detected after the first start, I recommend that you charge the battery while the laptop is turned off. Start the laptop with battery only and check if she recognized properly s.

  • Toshiba A300 PSAGCE battery not detected

    Hello everyone.

    I have a Toshiba Satellite A300 (PSAGCE) which worked well since I. Recently, he showed "battery not charging". I went to see what I could do and someone advised that I should update the BIOS. So, I went to the website of Toshiba and downloaded the update for my BIOS. I have install without problem. He now has the version 2.20. The problem of "battery not charging" had disappeared.

    I had a new problem: battery not detected!

    The battery worked well and he gave me 2 hours of normal use. Now, it is not "detected". I did everything I could think of. Do you have the BIOS reset (pressing on the WE / OFF button / stop for 30 seconds), I left it with the battery for a few days, etc...

    When I connect the battery, it shows an orange light for 5 seconds and he died later. I don't know what more I can do. I contacted Toshiba in my country without success. They have not yet responded to my email.

    Any ideas? I tried with another charger than computer shows the same.

    I have install as a program of "batterycare.net" and it shows that I have 1.40 hours of battery, but as soon as I remove the cable ca, the computer shuts down without power.

    I guess I won't be needing help... I flashed my BIOS with a lower version that I had (2.20 > 1.80) and now it does not start even upward.

    I'm kidding not things for good.

    Any changes to save it?

  • Windows7 HP Pavilion dv6 Notebook PC - battery not detected

    Hello

    I just bought a new battery, precedent is 4 + years.  During the installation of the battery in my status bar icon indicates it AC is powered, but the battery has a red cross on it.   When I hover over the icon it tells me "battery not detected."   I tried everything that the HP article for 'battery not detected' I found, but the recovery of the system.

    What are my options now?

    Robyn

    Problem solved... returned to the seller.

  • Windows 7 does not detect not USB flash drive

    Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

    Assuming that you have several disks that work on other computers...

    If you have tried several USB drives on the same port

    AND

    This port does not recognize the USB device plugged in, while the port is not operational.

    IF

    All ports respond in the same way

    THEN

    You don't have either not installed the correct drivers

    OR they did not physically.

  • Windows 7 does not detect multiple external hard drives

    I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

    If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

    The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

  • Can I upgrade to Windows 7 or not?

    I downloaded the beta version of windows 7 upgrade advisor to my desktop computer and it has identified one of my devices incompatible with windows 7.  This device was the NVIDIA Nforce System Management Controller.  Everyone there knows what the heck this thing is and what it does?  The strange thing is, in my view, that this thing is related to the chipset on the motherboard that has 7 hardware compatibility list says that my motherboard is compatible with windows 7, the same thing with my EVGA Geforce 8800 GTS graphics card.  So my question is can I upgrade to windows 7 or not.  If this "system management controller" is not compatible which feature my system is going to lose?  Or Windows 7 will simply install something completely different, it's going to do the same thing this thing is now for me.  I know this may make me look like an idiot, but I am at a loss, and I don't want to pay the money to upgrade to windows 7 if he's not going to paralyze the functioning of my system.  Until there is only a minimum (and I mean minimal) information about it elsewhere on the internet.  Any help and clarification would be appreciated.
    Motherboard: Asus M3N78-VM
    Processor: AMD Phenom II 955
    Graphic card: EVGA Geforce 8800 GTS
    RAM: Kingston HyperX 8 GB DDR2 memory
    Current installed OS: Windows Vista Ultimate 32-bit

    A missing device driver will simply not seen by windows until one is added. If the adviser says incompatible, it is. If your system cannot function without this device, Win 7 will not install correctly. I would go on the nvidia for info on this site. It's perhaps not salvageable, but nvidia could only tell you that for sure.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Windows 7 will not detect THE routers wireless, including mine.

    Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

    Hello

    Thank you for contacting Microsoft Community.
    Is properly installed wireless adapter driver?
    Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
    Response if the issue is not resolved.
  • Windows 7 does not detect not PnP monitor

    Windows 7 does not detect a PnP (Samsung 2220wm) monitor when the monitor is connected through a KVM switch. Therefore, I can't set the correct screen resolution. The monitor is correctly detected when connected directly to the pc.

    This just started recently. Before that the monitor has been correctly detected, even through the KVM switch.

    Nothing installed that I remember. I'll contact Samsung - there have been similar problems with their monitors.

  • Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

    Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?

    Hi Tuulah6441378,

    Photoshop 4 and 7 are very old versions, downloads for them are no longer available and the operating system you are using is the most recent, so there will be compatibility problems.

    Adobe has not tested these applications on newer operating systems.

    Please see, historical version of Adobe Photoshop - Wikipedia, the free encyclopedia

  • Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

    Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

    The download, it's what you do to get a file from a Web site to your computer... Installation is what you do to have the installation files to put a program on your computer and the link to your operating system... what you do... Download or install?

    If you mean that Win10 will not allow you to INSTALL the program, read below

    Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

    -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

    - so if you have an older program, update you to Windows 10 at YOUR risk of problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -IF not, Details of the message from the error messages and a person may be able to help

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Qosmio G10-133 - battery not detected after upgrading to Windows 7

    Hello, I hope someone can help my frustrations here.

    In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

    The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

    I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

    In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

    If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

    If this is sorted my laptop should last for 5 years!

    Thanks for reading this.

    Dickie

    Hello

    First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

    To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

    If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

    By the way: some nice and interesting tips on battery:
    http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

  • Battery not detected after upgrading Windows 10

    Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

    I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

    Thank you!

    Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.

  • S540 battery not detected in Windows 10

    Hi all

    Just upgraded to Windows 10, but I now discover that the new companion of Lenovo or Lenovo settings enforcement will not detect the battery. I installed the System Interface Foundation etc., but to no avail. Battery is being charged is more than 50%, but in full and is no longer detected at all.

    Have you seen this happen also?

    Good day and welcome to the community.

    Please see the discussion on this topic:
    https://forums.Lenovo.com/T5/Lenovo-apps/Lenovo-Companion-3-0-and-Lenovo-system-interface-driver/m-p...

    There are some issues. Until it is resolved, you can follow the recommendations of the someotherguy.

    I hope this helps.

    Kind regards.

  • Satellite A500 - 18Q - battery not detected after installing Windows

    I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

    Windows is not detected battery. What should I install to the Windows recordnize the battery?

    Hi marnin,.

    Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

    Normally for the battery you n t need an additional driver. He will be recognized automatically.

    Can you charge the battery when the laptop is turned off?

Maybe you are looking for