Upgrade or install fresh to 11g RAC 10 GB Single Instance base data?

Similar Questions

• How to use backups RMAN to restore a RAC database to single instance on another host?

  How to use backups Rman to restore a RAC database to single instance on another host?

  I tried to copy these inline for you:

  ------------

  Backups RMAN disk HowTo restore database RAC to single Instance on another node (Doc ID 415579.1)

  Down

• Another issue duplicate RMAN - RAC database to single instance

  Hello
  
  I have a problem with RMAN duplicate procedure and hoped that someone can help you.
  
  I would like to create a duplicate of our data base RAC production on a separate and autonomous, database on another site server. This duplicate will be used to execute queries to another business unit that I don't want to have access to our database of intensive production.
  
  My procedure goes like this:
  
  1. create a (not ASM) disk based backup data files and recovery logs archived:
  
  'run {} '.
  allocate channel d1 type disk;
  backup format ' / u02/stage/df_t%t_s%s_p%p' database more entered archivelog delete;
  output channel d1;
  }"
  
  2 tar and scp those files to the same location on the standalone database server.
  
  3. in the meantime, work that's happened on the basis of data production and other archived redo logs have been generated. I don't really care about these papers for the purposes of the duplicate however, I just want to replicate to the point of the last backup. I have to do this, run the following SQL to determine the sequence number should I be duplicating up to:
  
  "Select max(sequence#) thread # v $ archived_log, whereas the deleted = 'YES' group by thread #;"
  
  4 duplicate the production to the stand-alone database database (SQL Net work orders).
  
  'run {} '.
  until the sequence (the value returned by the SQL statement above);
  duplicate target database xxx;
  }"
  
  However, my problem because I don't know how to handle the fact that he has two sons. I understand that each thread relates to one of the CARS, I don't know which one to specify the copy. We have a service of data that the client application connects through, and that the service runs on any of the bodies. I should just care about newspapers in the instance where the service is running?
  
  AM I even approach that this is the right way?
  
  I look forward to any help that people may be able to offer.
  
  Kind regards
  
  Phil

  1 9746 569095777 28 OCTOBER 09 569150229 28 OCTOBER 09
  1 9747 569150229 28 OCTOBER 09 569187892 28 OCTOBER 09
  1 9748 569187892 28 OCTOBER 09 569231956 28 OCTOBER 09
  1 9749 569231956 28 OCTOBER 09 569259816 28 OCTOBER 09
  2 7931 569095774 28 OCTOBER 09 569187902 28 OCTOBER 09
  2 7932 569187902 28 OCTOBER 09 569259814 28 OCTOBER 09

  You must use the VALUE until and specify the sequence with the next lowest change, or RMAN will search for the next log in this thread.

  for example, if you specify until the thread in the sequence 9750 1; RMAN will search journal 7933 on thread2 to catch the 1 wire SNA 569259816.
  Specify the set as a thread in 7933 2 sequence; and two copies must go ok!

  Published by: MrShh on October 29, 2009 14:35

• How do I know if the RAC database or single instance?

  Hello
  
  How can you find only if the database is the only database instance or RAC? is there any table, view or setting in the settings file that you cannot know CARS?
  
  any sugestion will be appreciable
  
  
  Thanks and greetings
  VD

  11:41:57 SQL> show parameter cluster
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ---------------------------
  cluster_database                     boolean     FALSE
  cluster_database_instances           integer     1
  cluster_interconnects                string
  

  http://www.MCS.csueastbay.edu/support/Oracle/doc/10.2/server.102/b14237/initparams023.htm

• Installing oracle 11g (RAC) on RHEL 6

  Dear all,
  
  
  Me and my team will install oracle 11g (RAC) on RHEL 6.
  About mention above I have little doubt it please help me out in this matter.
  
  In the network section.
  
  Requirement of intellectual property:
  
  1 public IP address
  2 private IP
  3. virtual IP address
  
  Suppose we have two interfaces in each server, eth0 and eth1.
  
  I put the public IP address in eth0 192.9.25.100 and private 10.79.1.100 eth1 IP address
  Now where put the virtual IP address and what is the procedure.
  
  Please help me to set the virtual IP address
  
  
  Thanks and greetings
  Yvon Das
  S/n, Guwahati
  
  Published by: Yvon on 23 May 2013 23:44

  Hello

  See the message below:

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-Oracle-Linux-6-using-VirtualBox.php

  If you need clarification update here.

  Thank you
  A H E E R X

• Setup error 11g RAC on windows 2008r2 on VMWare ESXi 5

  I am a beginner and install oracle 11g r2 rac for the first time. I'm stuck in the fixing, I use windows 2008r2 on VMWare.
  We have attached 500 GB drive of NetApp storage for these hosts.
  no newspaper is generated at home to see the errors of milling
  
  in rootcrs_rie_oradbn1_vm.log. I see an error
  
  -19 March 2012 18:17:45 GMT + 04:00 [the customer problem Description]
  Description of the problem: Configuration of the Infrastructure Grid [INS 20802] failed.2012 - 03-19 16:45:29: creation or upgrading of Local Oracle (OLR) registry
  2012-03-19 16:46:45: return code of command of 255 (65280) command: E:\app\11.2.0\grid\bin\ocrconfig-local - update arg\sapadmin
  2012-03-19 16:46:45: E:\app\11.2.0\grid\bin\ocrconfig-local - upgrade failed with the error: 255
  2012-03-19 16:46:45: cannot create or upgrade OLR
  
  I'm following the intallation of oracle rac document.
  
  Kindly help
  
  Thank you
  Rajesh.

  923293 wrote:
  Thank you for the support, I installed Oralce 11 g RAC wind2008 r2 virtual machine environment successfully, I downloaded 11.2.0.3

  1. problems solved after execution of runcluvfy

  Thank you very much
  Rajesh.

  Please let us know.
  Please mark our suggestion as being correct or useful if you think that they were closing the debate.
  https://forums.Oracle.com/forums/Ann.jspa?annID=718

• 11g RAC Installation fails add the instance on windows 2003 Server

  I am install 11g RAC on windows server 2003.
  Finished creating House of CRS and it looks good.
  Tried to create the database using DBCA it gives me below error. Help, please.
  
  D:\ > srvctl add instance d mgrpdb-i mgrpdb1 - n mgrpcluster-1
  PRKO-2010: error in adding instance to the node: mgrpcluster-1
  PRKR-1008: adding the instance mgrpdb1 on the mgrpcluster-1 node to the cluster database
  mgrpdb failed.
  PROC-27: error in authentication layer authentication failure [ALS error informat
  ion: category: operation [1234]: [scls_iddb_get_privgrp_id_by_name] location: [L
  [ookupAccoun] others: [LookupAccountName failed] Dep: [1332]] [1]
  
  concerning
  Musaddaq

  Salvation;

  Please check below and see its useful for your question:

  Upgrade to 10204 CRS cannot start Instance resource to aid native group 'dba' [603667.1 ID]
  PRK % error - Cause and Action required [ID 178435.1]
  Bug 3584146 - PRKR-1008 instance adding to SIR via SRVCTL [3584146.8 ID]

  It may be useful

  Respect of
  HELIOS

• Replay on 11g RAC

  Hi all

  OS: Win 2003, linux 5.8

  DB: 10.2.0.4, 11.2.0.3

  We make migration and upgradation of 10 g and 11 g, Windows to Linux and the single instance to RAC.

  We took charge of the single instance of Windows 10 g and you want to replay on 11g linux RAC.

  So, how can we repeat RAC?

  Suggest pl...

  A

  Kind regards

  Andy.

  Hi guys I had the way... I created ACFS partition and kept all the files captured on this subject... has started the agents on both nodes... done.

• Oracle 11g RAC installtion

  Hello
  
  I would like to know how to install Oracle 11 g RAC by using the virtual machine.
  
  material:
  RAM: 8 GB
  Hard drive: 320
  CPU: i5
  
  above hardware is compatible for oracle 11 g RAC?
  Please suggest.

  996253 wrote:
  Hello

  I would like to know how to install Oracle 11 g RAC by using the virtual machine.

  check the link below.

  http://www.Oracle-base.com/articles/11g/Oracle-DB-11gr2-RAC-installation-on-OL5-using-VMware-Server-2.php

  material:
  RAM: 8 GB
  Hard drive: 320
  CPU: i5

  above hardware is compatible for oracle 11 g RAC?
  Please suggest.

  Yes, you can install the help above HW.

• can change uid and gid of oracle user after installation of 11g rac

  can we change after installation of 11g rac oracle uid and gid in 11g RAC. ?
  
  Thank you
  Boucetta

  Read this
  It is supported to change Uid/Gid of the owner of the Oracle database software after Installation? [1474891.1 ID]

  * "It is not supported to change the UID/GID of the owner of the Oracle database software after installing". * "

  Please don't forget to close your message, you got your answer :)

• Configuration of the laptop for R12 with node 2 11g RAC database

  Hi all
  
  I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.
  
  Configuration:
  

  generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
  8 GB RAM DDR3
  750 GB HARD drive

  this configuration will be sufficient for the highest installation? RAM? Processor?
  
  I've read a few threads over on this forum where people have recommended for installation of single application (11i or R12), this kind of configuration can be enough.
  
  Please answer.
  
  Thanks in advance.
  
  Brij

  I plan to buy a new computer dell laptop XPS to install Oracle Apps R12 with node 2 11g RAC DB by creating virtual machines.

  Configuration:

  generation of Intel processor i5-2410 2 (2.3 GHz, core 2, 3 MB cache)
  8 GB RAM DDR3
  HARD DRIVE 750 GB

  This configuration will be sufficient for the highest installation? RAM? Processor?

  You need at least 4 GB for installation on a single node R12. So, if you plan to have 3 VMs (1 application node) and 2 RAC nodes or 4 virtual machines (2 application and 2 RAC nodes), then I suggest that you add more memory. However, your RAM should work, but don't expect (if you go with 3 VMs) but do not expect the performance to be perfect.

  Thank you
  Hussein

• 11g RAC - RAW Devices Configuration

  Hello
  
  Please let me know if there is a difference in the configuration of RAW devices for 11g RAC compared to 10g.
  For example in 10g, we would separate RAW Devices for OCR, voting disk, ASM spfile, archives log files and database files.
  
  Please let me know if configuring RAW devices in 11g is different from that of 10g.
  
  Kind regards
  N V
  
  Published by: user7202581 on April 19, 2011 23:54

  Hello

  all first with 11.2. directly use the RAW devices is no longer supported. However, you can use RAW devices below ASM. So if you use ASM for data files, archivelogs etc, then the ASM disks can be RAW devices.
  Second: A general comment on Linux RAW devices. Have become obsolete from CRUDES Linux devices (I think with RHEL 5.3), so I recommend the direct use of block devices (which is possible since 10.2.0.2).

  No to your question:
  With 11 GR 1 material has not changed the configuration of the CRUDE devices.
  With 11 GR 2, the configuration has changed. See the Grid Infrastructure Installation Guide for additional and accurate information (on the installation, rights of user etc.).

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e17212/storage.htm#CDECEBGH

  Concerning
  Sebastian

• Error installing Grid Control 11g

  Hello. I try to install Grid Control 11g without success.
  I use SuSe Enterprise 10 sp3 already installed weblogic 10.3.2 and created an instance of database repository without problems.
  The installation process fails when reached the stage "WHO Setup." Here is the last part of the log omsca (journal says to check the file "omsca_20110209122055.log" for more information, but it points to itself):
  
  
  FINA: Order WebTier successfully.
  February 9, 2011 12:45:16 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
  FINA: Clean the instance directory: / home/oracle/gc_inst/user_projects
  February 9, 2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
  FINA: Cleaning of the instance home directory: / home/oracle/gc_inst/em
  February 9, 2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterDeleteOMS
  FINA: Deleted the SGD
  February 9, 2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
  FINA: The value of infra completion of installation is: true
  February 9, 2011 12:45:41 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
  FINA: Cleaning of the WHO from the repository
  February 9, 2011 12:45:51 oracle.sysman.omsca.adapter.wls.OMSWLSAdapter adapterCleanup
  FINA: Received the host URL: null
  February 9, 2011 12:45:51 oracle.sysman.omsca.framework.OMSGenericAdapter postDeployAndReposSetup
  GRAVE: OMSCA-ERR: SGD Protección Fallo. Consult el archivo rastreo:/home/oracle/middleware_home/oms11g/cfgtoollogs/omsca/omsca_20110209122055.log
  February 9, 2011 12:45:51 oracle.sysman.omsca.framework.OMSCAFreshInstall run
  GRAVE: SGC security failed.
  February 9, 2011 12:45:51 main oracle.sysman.omsca.framework.OMSConfigAssistantDriver
  FINA: Got resultfalse
  
  
  
  Thanks for your help.

  Please don't get me wrong: but I just wanted to be sure that you have installed WLS 10.3.2 (and not 10.3.x).

  Did you install patch WDJ7 as well? If you check the article ID [1063762.1] in MOS, you will find the notice:

  Important: You must apply the WDJ7 Patch to the WLS home before the installation/upgrade of the Grid control. Refer to Note 1072763.1 for instructions on how to apply the patch online/offline to WLS.

• Oracle 11g RAC can support 2 separate databases?

  1. can you Oracle 11 g RAC support 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?
  2. Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?
  I'm leading a team for a project of 11g and appreciate the answers.
  Thank you
  Satish.

  Oracle 11g RAC will support the 2 separate databases because it requires to SCAN ip cluster with a port number unique listener?

  YES

  Oracle 11.2 database connections will work correctly if I install a mandatory DNS server in Oracle RAC servers?

  YES

• The practice of 11g RAC on 2 GB RAM box

  I have a desktop with 2 GB of RAM. Operating system already uses 800 MB of RAM.
  
  Is it possible to install 11g RAC on vmware with only 1.2 GB of memory available?
  
  Or
  
  A single node is possible for 11g RAC
  
  Or
  
  I can install it AS a single.
  
  Please do not ask me to increase the memory because I can't :)

  RAC_DBA wrote:
  I have a desktop with 2 GB of RAM. Operating system already uses 800 MB of RAM.

  Is it possible to install 11g RAC on vmware with only 1.2 GB of memory available?

  Or

  A single node is possible for 11g RAC

  Or

  I can install it AS a single.

  Please do not ask me to increase the memory because I can't :)

  Try for one RAC node. I was not able to maintain the stability of the VMS at least 2.2 GB for computers 3 virtual - constant restarts due to timeouts. (iSCSI to 256M, each VM CARS to 1 GB).