Upgrade to Cisco TMS (backup meetings)

Similar Questions

• Exchange of TMS 3.0.1 & TMS 13.2 Cisco TMS server does not respond. Put an end.

  Hello

  I recently upgraded to TMS 13.2 and installed Exchange TMS 3.0.1. Installation and Configuration worked well, but no event is synchronized to MSDS. If I look at the log file, I see the following line:

  Cisco TMS Server is not responding. Halting.

  It seems that TMS Exchange is not able to communicate with the TMS. Setup worked well, and the TMS user is Super Administrator, so I don't think it's a problem of permission.

  I have attached the journal exchange of tms with level Debug of the game.

  Any ideas?

  Hey

  Using HTTPS or HTTP to communicate with the SMT server through the TMSXE service?

  Also, I would look in the Windows event logs to see if there's something interesting here. Especially check the application + TMSXE the event logs. I Don t want to join here (it's for the TAC) but if you see something that could be linked to the issue, please let us know.

  Otherwise, I recommend you get help from TAC on this since it is more appropriate for a deeper repair.

  / Magnus

• TMS of Cisco 'Unable to access Cisco TMS' error

  Hello

  I have another problem with the server of TMS as well! On my Web interface, I get the message "Unable to access Cisco TMS - TMS Incorrect database version" detected! Someone has an idea?

  What TMS version?

  Is it a new installation or you migrate TMS and TMSPE?

  This error is usually visible with the TMS upgrades/migrations when the SQL database is running an earlier version.

  Difficulty, uninstall TMS and then reinstall it.

  During the re - install, you will receive a prompt to upgrade the database.  This should fix the problem.

• CUCM + MCU + CISCO TMS integration

  I'm marching integration with MCU 4.5, 10.5 CUCM, sx20 and TMS 14.5

  According with manual bellows

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/MCU...

  I ve done a Deploying an MCU as a multimedia resource for Unified CM.

  MCU has a SIP trunk with 10.5 CUCM, MCU is recorded as the Conference on the multimedia resource.

  SX20 Conference ad hoc works well with another 7 codecs.

  My question is

  I want to plan conferences by mcu or cisco TMS, but I am not able to do.

  How can I integrate Cisco TMS or planning by MCU?   It s not working not on my side.

  Hello

  Please see the following guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  HTH

  Manish

• SNMP device through cisco TMS

  Hello

  I have some devices (2 CTS 3010, CUCM, GST of VCS - C and 3 2 1) managed by a Cisco TMS. I want to monitorate all devices to a network/system like HP OpenView management tool.

  Is it possible to leave the TMS works as a server snmp / trap receiver, and transmit received traps to network management tool? In other words, is there a way to configure trap forwarding in TMS?

  The TMS, I configured the IP address of HP's OpenView under network configurations, but it doesn't seem to work.

  On CUCM, I configured the Ip address of the TMS as trap receiceiver.

  Thanks in advance

  Hello

  TMS uses only SNMP interruptions for older systems (MXP, TANDBERG classic). Traps SNMP of newer systems (series C, CTS, MX, E20, SX20 etc.) and products (CUCM, VCS, MCU, gateways) network infrastructures are ignored by TMS. (it's not mentioned as well in the documentation, but I'll look in there clarifying). So no, you can't configure the transfer of trap in TMS.

  But why do you need TMS to send traps to an external system; could not do of your endpoints send traps directly to the external network management tool?

  Kind regards

  Kjetil

• can plan us the Conference from Outlook with Cisco TMS

  Hi team,

  is it possible to provide to the Conference by the prospect with Cisco TMS, we have no license to Exchange provisoning. Y at - it a plugin that can be used with Microsoft outlook.

  Please advise.

  See above for my response, either you need to purchase the license and install / configure Setup

  or you program something yourself.

  I would not exclude that there could be tools external hookin upward on the MSDS as well, but I'm not aware of anything.

  The other way is to do it by politics, rent rooms and is a participant dials up to the

  others or if the meeting is greater everyone connects the mcu...

• Cisco TMS 14.4 "Ajax request failed...". »

  Hi Experts,

  I installed Cisco TMS 14.4, installing all makes them very well, but at the first connection, I had error in Pop - Up The Ajax request failed...

  TMS ERRORCOOKIE {FF44A030-7F95-461C-8065-615FCE335F7B} var TMSError = {toggle: function (tableId) {var errorTable = $(tableId); errorTable.style.display = 'block';}} TMSElement.positionCenter (tableId); $('InfoTable').style.display = 'none '; }} Stop_Wait();   An error has occurred!
  Please click the back button on your browser to return to the previous page or click here to go to the front page of TMS. If the problem persists, contact your administrator to TMS.

  You can see the image

  Can someone help me

  Thank you

  Hello

  It should be a more specific error message in the log - web.txt, located in the \data folder in the MSDS on your server installation directory. What did he say?

  Kind regards
  Kjetil

• where the Cisco TMS database knowledge guidance document?

  The TMS Installation done doc refers to the following doc:

  Cisco TelePresence Management Suite database knowledge tips

  D14216

  But I can't find it on CCO.

  Does anyone have a copy of that PDF?

  The copy that I named:

  Guide to setting up Cisco TMS SQL database product

  December 2010 D14216.01

  A little outdated.

  Rgds, Geert Folens.

  Looks like it is available online:

  http://www.manualslib.com/manual/408637/Tandberg-TMS-SQL-database-configuration-guide.html

• Addition of Cisco IOS Gatekepper to Cisco TMS

  Hi people,

  Does anyone has idea about adding Cisco IOS Gatekeeper for Cisco TMS. I tried it. added, but no luck.  We use the TMS 13.2.2 and IOS 12.4

  Thank you

  Hi Jean Claude, please refer to product support 13.x TMS guide of

  http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/interoperability/Cisco_TMS_Product_Support.pdf.

  I don't see that Cisco IOS GK is tested with TMS.

  BR, Mahesh Adithiyha

• Cisco TMS first activate Idle all sessions

  Hello.

  We have the video conferencing system with Cisco TMS, blades MCU 8420, Tandberg Gatekeeper and Cisco in the series C endpoint, MXP series etc...

  This week we have problems with planning because when we planned to meet his past of in waiting for idle session direct and all sessions the codec says no connection.

  never start the meeting on active sessions.

  then that we end the session or meeting and reprogram this session and that begins at the current session.

  IM verified the conectivity between Cisco TMS and MCU, Endponits its Ok.

  rigth now we rebooted the server and MCU and the GA but when even continue the problem.

  The cisco TMS its located in other areas with transit to WAN network. We reserve the bandwidth with QoS for video, voice and data for im MCUS and endpoints asking its required reserve BW TMS Cisco commands API, Https, Https and other protocols? the problem may be congestion in WAN networks?

  This Protocol should ensure guarantee connect API orders end to end of Cisco TMS - MCUS and endpoints.

  I appreciate your support.

  Giacomo BR P.

  I did not completely understand your description.

  The communication is done on MSDS by HTTP or HTTPS, depending on your settings.

  In general, I would say that the management / follow-up will also through these ports, I would

  expect tickets with problems logging on your TMS.

  I could look at the logs and see: is the Conference properly generated on the MCU.

  is the dial in number okay, can the scope of endpoint the mcu, can the mcu reach end points.

  y at - it something suspicious on the GK, conferences and any other reservation of port

  on the MCU

• Cisco TMS taken in charge the list of endpoints

  Is there an updated version of the supported Cisco MSDS list endpoints, as can be found here:

  http://www.Cisco.com/en/us/products/ps11338/tsd_products_support_integra...

  This document has been updated for Cisco TMS 13.2, and we are now at the time writing on CIsco TMS 15.1

  I want to check if changes have been made between 13.2 and 15.1 of decline in support of endpoints, or support of the additional endpoints, including?

  Thank you

  Cisco stopped publishes the document after TMS 13.x MSDS product support, refer to the searching for information on the supported by Cisco TMS systems for more information.  That said, you must reference it TMS Release Notes to see what support has been deleted and added in this output.  You can also take a look at endpoint-support-tms-14-and-tms-15 for a list of example of endpoints wire is no longer supported Wayne created.

• Upgrade to Cisco ISE

  Hello

  I have cisco ISE 1.0, which I want to spend 1.3 ISE. According to the upgrade path, I would need to follow this process

  1.0 > 1.1 (apply the latest patch) 1.2 > 1.3

  The bundle 1.0 to 1.1 is deferred. So I think to install a new 1.3 ISE as a virtual appliance and then configure it from there. I have not too clued up on ISE so I was wondering is there a way to backup on ISE 1.0 and 1.3 restoration?

  If this is not the case, what would be the best approach?

  Thank you

  Wow 1.0 to 1.4 is a big leap in functionality. You run this in your production network?

  Authentication and authorization should continue to work that you have configured the.

  On the top of my head

  -you come on duty return to the AD domain (if you have joined in the first place). Make sure you have the credentials of the service account to do.

  -Comments and other portals have been completely redesigned. If you have made any customizations, you're probably better it demolition and reconstruction by using the new tools of the portal generator.

  -Depending on whether you have advanced Base 1.0 licenses will take you through basic or Apex with 1.3 / 1.4.

  -ISE has a ton of other features that may or may not apply in your environment.

• El Capitan upgrade crash & loss of backup Time Machine

  I have a 2008 MBP running Yosemite and back up to a Time Capsule. Last week, I noticed weird problems with connectivity and slow performance. Last week, I started receiving messages that the Time Machine backup failed.

  I decided to upgrade to El Capitan in the hope to solve weird problems I saw. I checked in the application Time Machine that my last backup was March 28, so I proceeded with the upgrade.

  The upgrade of the El Capitan crashed and I got an error report. I tried several of the fixes available online (hold Shift and start in safe mode to complete installation, command-R and reloading the OS X). Nothing has worked.

  I finally decided to go back to my backup TM start over and try again. I held command-R and got in the start menu. I chose to restore from a backup Time Machine, which has been connected to my TM. However, my TM shows that my latest backup is 28 July 2015. It is a huge problem...

  How is it, I was warned never between July and March that backups are not working?

  Why TM would show that I had a valid backup on 28 March, when its not available in the restoration of the process?

  I am at a loss. I am trying to restart in safe mode to see if my files are still on my local HD, but who is locked up.

  Can you please advise what to do? Thank you.

  Time Machine is less reliable.

  I advise the people now to create a clone of their computer startup drive bootable using an application like Carbon Copy Cloner... immensely more reliable than TM.

  Which of course is useless for you now.

  My advice is to put the current hard drive of the computer replaced. It is likely that the installation failed (and your previous operating system was in place) because of the disk hard defective... they are cheap and readers are now extremely better than 2008 if the laptop is on the original drive.

  Clean, install the OS on the new drive, then connect the old hard drive to the computer using a sata cable USB... drive bracket / speaker.

  Then you're going to see how good or bad it is... and I hope that you can import (use the migration assistant) and get all of your files.

• Upgrade to Yosemite with backup Time Machine El captain

  I have a machine on Mavericks I would take to Yosemite.  I already have the application installed.  I wish it were a mirror image of my machine El Capitan.  Can I switch to using a time Machine Yosemite El Capitan?

  THX

  No, but you can upgrade to El Capitan. At this point, you can go to Yosemite, but you can't make a mirror of the El Capitan system. You can't mix and match OS X versions.

  You can restore the backup Time Machine of El Capitan is what your folder.

• The upgrade to Cisco ACS

  Hello.

  I would like to upgrade our current ACS NT Terminalserver edition server to a Win2000 server. Since this upgrade requires a fresh installation (since a direct upgrade from NT 4 TS to w2k is not the best thing to do). My question is, do I have to do to ensure that I can keep my user database active? Is replication the answer? And replication will make a copy of all the different users/groups/routers etc etc. In other words, I'll be able to do this upgrade without too much trouble?

  I speak here of a replication of the database, do not configure replication between servers ACS.

  Here is the doc that will help you to do this

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/csnt30/user/AE.htm