Upgrade to CTS.1-7-0-1-4764R-K9.P1.sbn fails
When I try to upgrade a CTS500 to CTS.1-7-0-1-4764R-K9.P1.sbn, it fails.
Shows IP phone: loading... image image not found.
CTS 1.7.0 running (4709) as a step in the meantime of CTS 1.6.7 (4212) but that does not solve the issue.
CTS.1-7-0-1-4764R-K9.P1.SBN is in the directory root (/) of the TFTP server (same as the file 1.7.0 (4709) CTS).
Downloaded the file from the ORC several times without a bit of luck.
Maybe a file corrupted on ORC?
There are serveral questions. Better is to open a service request to examine the papers. Question: You restarted the server TFTP on CUCM, it helped?
Tags: Cisco Support
Similar Questions
-
my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
02:42:25 amUTC 23/08/11
-
Upgrade of VCSA 6.0.0b 6.0 U1 or U1b fails
Hello
So I'll try to upgrade my 6.0.0b U1 or U1b VCSA and these two fail.
Steps I do:
1 downloaded ISO
2 joint ISO Unit
3 SSH to the embedded device vCenter PSC.
4. run the command:
firmware install iso - acceptEulas
firmware install iso - acceptEulas
[2016 02-11 T 23: 21:12.042]: staging of packages of software patches of ISO
[2016 02-11 T 23: 21:12.042]: ISO unmounted successfully
[2016 02-11 T 23: 21:12.042]: CD players have no valid iso patch.
[2016 02-11 T 23: 21:12.042]: installation process has not
The error, with that it fails
So I downloaded the ISO Unit 6.0 KB patch
VMware KB: Full Patch for VMware vCenter Server 6.0
1 attached this ISO Unit
2 run the same command and he staged successfully, but the installation fails with the error:
running test transaction
installation process failed
No access to the VAMI page because this isn't a GA?
Any thoughts?On a side note, I thought, I can do the following?
1 mount the ISO U1b 6.0 on a windows machine
2. open vcsa.html
3. click on upgrade and provide details of the existing unit.
Will this work?
Suhas
I used the Patch ISO to U1b 6.0, and the upgrade succeeded.
It's pretty funny, the upgrade for the same ISO does not a Friday, but worked on a Monday.
Suhas
-
Upgrade VMware Tools to 11.1 in Xubuntu invited 14.04 fails
Hello
Upgrade VMware Tools from 11.0 to 11.1 in Xubuntu 14.04 fails - see the error message below.
My Xubuntu 14.04 is up-to-date. I've recently performed 'apt - get dist-upgrade'.
I can continue with the installation, but then shared folders does not work.
I don't know what the problem... Everything has worked fine up to 11.0 and I never had problems with VMware Tools upgrade. Help, please.
Annex: Error Message
Using the kernel build system.
"do: Verzeichnis" / tmp/modconfig-snuOuv/vmhgfs-only 'enter wird. "
/ usr/bin/make /lib/modules/3.13.0-46-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Verzeichnis»/usr/src/linux-headers-3.13.0-46-generic«wird enter
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/file.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-snuOuv/vmhgfs-only/link.o
In file included from usr/src/linux-headers-3.13.0-46-generic/arch/x86/include/asm/percpu.h:44:0,
of usr/src/linux-headers-3.13.0-46-generic/arch/x86/include/asm/preempt.h:5.
of include/linux/preempt.h:18.
of include/linux/spinlock.h:50.
of include/linux/mmzone.h:7.
of include/linux/gfp.h:4.
of include/linux/mm.h:8.
of include/linux/pagemap.h:7.
from /tmp/modconfig-snuOuv/vmhgfs-only/inode.c:29:
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c: in function 'HgfsPermission ':
include/Linux/kernel.h:793:27: error: 'struct dentry' has no member named 'd_alias '.
const typeof (((type *) 0)-> member) * __mptr = (ptr); \
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:708:13: Note: the expansion of the macro 'hlist_entry_safe '.
for (pos = hlist_entry_safe ((head)-> first, typeof (* (pos)), member); \)
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
include/Linux/kernel.h:793:48: warning: initialization of the [default] incompatible pointer type
const typeof (((type *) 0)-> member) * __mptr = (ptr); \
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:708:13: Note: the expansion of the macro 'hlist_entry_safe '.
for (pos = hlist_entry_safe ((head)-> first, typeof (* (pos)), member); \)
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
In file included from include/linux/compiler-gcc.h:106:0,
of include/linux/compiler.h:54.
of include/uapi/linux/stddef.h:1.
of include/linux/stddef.h:4.
of usr/src/linux-headers-3.13.0-46-generic/include/uapi/linux/posix_types.h:4.
of include/uapi/linux/types.h:13.
of include/linux/types.h:5.
of tmp/modconfig-snuOuv/vmhgfs-only/./shared/driver-config.h:71.
from /tmp/modconfig-snuOuv/vmhgfs-only/inode.c:26:
include/Linux/compiler-gcc4.h:14:34: error: 'struct dentry' has no member named 'd_alias '.
#define __compiler_offsetof(a,b) __builtin_offsetof (a, b)
^
include/linux/STDDEF.h:17:31: Note: the expansion of the macro '__compiler_offsetof '.
#define offsetof (TYPE, MEMBER) __compiler_offsetof (TYPE, MEMBER)
^
include/Linux/kernel.h:794:29: Note: the expansion of the macro "offsetof".
(type *) ((char *) __mptr - offsetof (type, member)) ;})
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:708:13: Note: the expansion of the macro 'hlist_entry_safe '.
for (pos = hlist_entry_safe ((head)-> first, typeof (* (pos)), member); \)
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
In file included from include/linux/preempt.h:10:0,
of include/linux/spinlock.h:50.
of include/linux/mmzone.h:7.
of include/linux/gfp.h:4.
of include/linux/mm.h:8.
of include/linux/pagemap.h:7.
from /tmp/modconfig-snuOuv/vmhgfs-only/inode.c:29:
include/linux/List.h:710:35: error: 'struct dentry' has no member named 'd_alias '.
POS = hlist_entry_safe ((pos)-> member.next, typeof (* (pos)), member))
^
include/linux/List.h:697:12: Note: in the definition of the macro 'hlist_entry_safe '.
({typeof (ptr) ___ptr = (ptr); \})
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
include/linux/List.h:710:35: error: 'struct dentry' has no member named 'd_alias '.
POS = hlist_entry_safe ((pos)-> member.next, typeof (* (pos)), member))
^
include/linux/List.h:697:28: Note: in the definition of the macro 'hlist_entry_safe '.
({typeof (ptr) ___ptr = (ptr); \})
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
In file included from usr/src/linux-headers-3.13.0-46-generic/arch/x86/include/asm/percpu.h:44:0,
of usr/src/linux-headers-3.13.0-46-generic/arch/x86/include/asm/preempt.h:5.
of include/linux/preempt.h:18.
of include/linux/spinlock.h:50.
of include/linux/mmzone.h:7.
of include/linux/gfp.h:4.
of include/linux/mm.h:8.
of include/linux/pagemap.h:7.
from /tmp/modconfig-snuOuv/vmhgfs-only/inode.c:29:
include/Linux/kernel.h:793:27: error: 'struct dentry' has no member named 'd_alias '.
const typeof (((type *) 0)-> member) * __mptr = (ptr); \
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:710:13: Note: the expansion of the macro 'hlist_entry_safe '.
POS = hlist_entry_safe ((pos)-> member.next, typeof (* (pos)), member))
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
include/Linux/kernel.h:793:48: warning: initialization makes pointer from integer without a cast [default]
const typeof (((type *) 0)-> member) * __mptr = (ptr); \
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:710:13: Note: the expansion of the macro 'hlist_entry_safe '.
POS = hlist_entry_safe ((pos)-> member.next, typeof (* (pos)), member))
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
In file included from include/linux/compiler-gcc.h:106:0,
of include/linux/compiler.h:54.
of include/uapi/linux/stddef.h:1.
of include/linux/stddef.h:4.
of usr/src/linux-headers-3.13.0-46-generic/include/uapi/linux/posix_types.h:4.
of include/uapi/linux/types.h:13.
of include/linux/types.h:5.
of tmp/modconfig-snuOuv/vmhgfs-only/./shared/driver-config.h:71.
from /tmp/modconfig-snuOuv/vmhgfs-only/inode.c:26:
include/Linux/compiler-gcc4.h:14:34: error: 'struct dentry' has no member named 'd_alias '.
#define __compiler_offsetof(a,b) __builtin_offsetof (a, b)
^
include/linux/STDDEF.h:17:31: Note: the expansion of the macro '__compiler_offsetof '.
#define offsetof (TYPE, MEMBER) __compiler_offsetof (TYPE, MEMBER)
^
include/Linux/kernel.h:794:29: Note: the expansion of the macro "offsetof".
(type *) ((char *) __mptr - offsetof (type, member)) ;})
^
include/linux/List.h:687:40: Note: the expansion of the macro «container_of»
#define hlist_entry (ptr, type, member) container_of (ptr, type, member)
^
include/linux/List.h:698:15: Note: the expansion of the macro 'hlist_entry '.
___ptr? hlist_entry (___ptr, type, member): NULL; \
^
include/linux/List.h:710:13: Note: the expansion of the macro 'hlist_entry_safe '.
POS = hlist_entry_safe ((pos)-> member.next, typeof (* (pos)), member))
^
/tmp/modconfig-snuOuv/vmhgfs-only/inode.c:1920:7: Note: the expansion of the macro 'hlist_for_each_entry '.
hlist_for_each_entry (dentry,
^
make [2]: * [/ tmp/modconfig-snuOuv/vmhgfs-only/inode.o] Fehler 1
make [2]: * Auf noch nicht processes wird going going...
make [1]: * [_module_/tmp/modconfig snuOuv/vmhgfs-only] error 2
make [1]: Verzeichnis»/usr/src/linux-headers-3.13.0-46-generic«verlassen wird
make: * [vmhgfs.ko] Fehler 2
"do: Verzeichnis" / tmp/modconfig-snuOuv/vmhgfs-only "verlassen wird."
The filesystem (vmhgfs module) driver is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
regardless of this function.
If you want the shared folders feature, you can install the driver of
running vmware-config - tools.pl again after making sure that gcc, binutils, make
and your kernel sources are installed on your computer.
These packages are available on the installation of your distribution CD.
[Press the Enter key to continue]
As Barney42 pointed out, this question comes with the new kernel 3.13.0 - 46. And indeed helped me to find a workaround:
Tools can be patched manually. In vmhgfs.tar, inode.c
d_alias
should be replaced byd_u.d_alias
put it back to the tar and then recompile tools.Here is a script that does this (tested on ubuntu 32 bit 14.04, vmware workstation on a windows host 11.1):
#!/bin/sh -x
cd /usr/lib/vmware-tools/modules/source
tar xf vmhgfs.tar
grep -q d_u.d_alias vmhgfs-only/inode.c && echo "already patched" && exit 0
sed -i -e s/d_alias/d_u.d_alias/ vmhgfs-only/inode.c
cp -p vmhgfs.tar vmhgfs.tar.orig
tar cf vmhgfs.tar vmhgfs-only
vmware-config-tools.pl -d -mNOTE: This makes incompatible tools with older versions of the kernel, i.e. 3.13.0 - 45.
However, @VMware-team, please do run again out of the box, or submit a patch for the Linux kernel. You are a large business, should be no problem.
-
OS: OEL5x86
DB: 11.2.0.3
Nice day
I am creating the environment for my new database being upgraded, but I get an error message...
/Ora/Oracle/proddb/11.2.0/appsutil/install/PROD_mobay/adcrobj.sh and /ora/oracle/proddb/11.2.0/appsutil/install/PROD_mobay/txkcreateACL.sh
neglected later telling me the same error ORA-12705: cannot access NLS data or invalid environment specified files.
-from journal autoconfig-
Profile of AutoConfig Phase
Current profile process 1 of 1 for AppsUtil
The execution of script in InstantiateFile:
/Ora/Oracle/proddb/11.2.0/appsutil/install/PROD_mobay/afdbprf.sh
script gave:
****************************************************
afdbprf.sh started Thu Jan 23 12:14:45 EST 2014
The environment settings are...
ORACLE_HOME: /ora/oracle/proddb/11.2.0
ORACLE_SID: PROD
PATH : /ora/oracle/proddb/11.2.0/perl/bin:/ora/oracle/proddb/11.2.0/bin:/ora/oracle/proddb/11.2.0/perl/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
Library path: /ora/oracle/proddb/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/ora/oracle/proddb/11.2.0/ctx/lib
Executable: /ora/oracle/proddb/11.2.0/bin/sqlplus
SQL * more: Production of liberation 11.2.0.3.0 Thu Jan 23 12:14:45 2014
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter the value 1: enter the value 2: enter the value 3: ERROR:
ORA-12705: cannot access files of NLS data or invalid environment specified
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Any Suggestions?
Kind regards
Shridath.
Please see:
AutoConfig is a failure with status 4 to a new database with NLS environment error ORA-12705 (Doc ID 1612017.1)
DatabaseTier Autoconfig errors ORA-12705: cannot access NLS files or invalid environment specified (Doc ID 548916.1)
AutoConfig is a failure with status 4 to a new database with NLS environment error ORA-12705 (Doc ID 1612017.1)
Thank you
Hussein
-
DV6-6135dx RAM upgrade: dv6-6135dx ram upgrade
I have a Pavillion dv6-6135dx upgrade ram using a 2.4GHz/1.5GHz VISION A8 Technology from AMD with AMD Quad-Core A8 - 3500 M accelerated processor. The specs say it supports an upgrade to 16 GB but all sets of ram I used fail after a short period of time. Help?
How they fail after a short time? What exact specifications of memory you install?
The maintenance manual no indication that Intel processor models may take 16 concerts; The amendments are limited to 8:
See pages 5 and 6. See the checkbox for AMD next to "Supports up to 8192 GB RAM system"?
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Dear Sirs;
I had a problem with my wireless card it breaks down after 4 hours of work. I contacted the laptop support they advised me upgarde my version of bios for compatibility issues and they gave me the link to the version that I had to upgrade. After I did the upgarde my VISTA has completely failed, it's a blue screen for me that I installed the new hardware and I should remove that VISTA can start.Please advice.
You have updated the Bios, the recommendations of the manufacturer.
I suggest that get you in contact with the manufacturer of your computer and tell them what happened to your operating system from following their advice and updated the BIOS.
They should help you to fix it.
See you soon. Mick Murphy - Microsoft partner
-
Can upgrade you Vista to 7 if the Windows repair failed?
I'm having a problem with my computer (Vista Ultimate 64) where there is a failure of the system, and it does not start, just restarts. Windows repair has not solved the problem.
Would it not be wise to purchase a Vista upgrade to Windows 7? This update level or likely to fail?
No, you can do a custom installation:
-
Problems of network of phones smart blackBerry after upgrade
After upgrade today, my entire calendar disappeared... and google sync fails!... says connection failed due to network problems, check your settings... Don't know what that means...
Any ideas? THX
I also got an error that there in no browser configuration. and to contact my provider... what the hell?
1 restore your calendar with Desktop Manager > Backup/Restore > advanced. Search your backup file "loader" most recent ending by ".ipd" and restore the database calendar.
2. for the browser and other connection issues:
Options > Advanced > host Routing Table > Menu > register.
If still nothing... send your books to your BIS service provider site.
http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3FAnd finally, as always, with the BlackBerry device switched on, disconnect the battery a few seconds and then reinsert the battery to restart
-
problems upgrading to vmware 5.5 6
Hello
We test the upgrade to v6. our environment is running dell poweredge 2950 servers.
On a server that has been installed with dell custom esxi 5.5 with the latest patch, if I put a disc of 6 vmware esxi version and run the upgrade process, it does not reach the following screen:
Operation failed.
This program has encountered an error:
Could not get esximage db module order: error (see the log for more information):
The facility profile could not be validated due to the following error:
Path of the file "/ etc/vmware/support" is claimed by the superposition of several VIBs: defined (['Lenovo_bootbank_Invcustomization_6.0 - 0a',
"Dell_bootbank_dell-Setup - vib_5.5 - 2 A 05'])
Path to ' / etc/vmware/oem.xml' is claimed by overlay muultiple VIBs: defined (['Lenovo_bootbank_Invcustomization_6.0 - 0a', ' Dell_bootbank_dell-Setup - vib_5.5 - 2 A 05'])
I am worried with the DVD of starting with the keyword Lenovo and don't understand why it has the word, I cannot suspect the dvd is a customized version of Lenovo ESXi, am I right?
Hello
This KB2036167 should help you solve this question, but yes, it seems that you have a custom ISO Lenovo, take Dell ESXi 6 ISO here after you perform the steps in the KB and good luck!
Hope this helps
vM
-----------------------
VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4
-----------------------
vMustard.com
-
Anyobody can help with errpor "Assertion failure" after upgrade to Windows 10
Hi all
I used to run successfully Lightroom 5.7 on Windows 8, until recently, I've upgraded to Windows 10. Since then, I get an "Assertion failed" error and Lightroom does not open. I looked this error and seems to have been a common theme for LR 5.4 days. So I tried all suggested fixes, but even register controls and reinstalling did not help. I can't make it work. Now: What can I do? Any idea?
Hi oliverl,
Greetings.
- While you hold down the ALT key, open Lightroom.
- New catalog, click on create a new catalog.
- If the step above does not work, then provide the pictures read and write access folder.
- Right-click on the folder images
- Properties - Security - Edit - Add
- Type everyone
- Click ok
- Now check all boxes (full control)
- Click on apply, then ok
Concerning
Rohit
- While you hold down the ALT key, open Lightroom.
-
Deployment/Configuration 12 c problem Agent of OEM 12 c Console upgrade
Greetings,
I'm still struggling with the difficulties of deployment/Configuration of the agent from the Console to upgrade Enterprise Manager 12 c 12. I use the method 2-system. Several agents were deployed properly, but the health check shows that the ping test failed. I found many discussions of the problem, but many of them are related to the deployment and configuration of a new agent from the console 12 c. The only note I could find about my this is Metalink Note [1377436.1] EM 12 c: upgrade health report deployed 12 c Agent Agent shows "Ping Test failed.
I am able to start the agent of 12 c and we found several suggestions including resecuring the agent, using emctl to clear the status of the agent, but none of those helped.
Some of the things I see are when the agent 12 c is emctl status returns SGD Version: (unknown). emctl ping SGD returns agent blocked by WHO. An interesting thig I see is a warning in the file - gcagent.log
2013-01-24 09:39:23, 076 [167:B5BF5C12:GC. Executor.1 (Ping WHO)] WARN - bad ping interval (EM_PING_NOTIF_RESPONSE: ERROR-Plugin information do not correspond with the repository)
which leads me to think the problem can be related plugin. If it is indeed the case, I'm not able to find information telling me how to fix plugin.
Any suggestions are greatly appreciated.
Thank you.
Bill WagmanAkanksha,
Thank you. SR 3-6714456351 has been opened Friday last and is still ongoing.
Bill Wagman
-
10gR 4 11g upgrade - error at startup
I've updated our development environment UCM to 11g. After you run the upgrade on the schematic and the Middle-Tier the UCM server fails to start and launch the errors listed below. See the mention of RecordsManagement I disabled the relevant components to see if this would allow a successful boot. Disabling these components has no impact. He also complains the xPartitionID but I checked the score has not changed and is still correct. Someone has seen this error (s)?
-snip-
< 2 May 2011 1:07:49 PM MDT > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >
< 2 May 2011 1:07:49 PM MDT > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".
javax.servlet.ServletException: could not start a deployment of servers of IDC.
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1253)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:542)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:455)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:132)
to idcservlet. IdcFilter.init (IdcFilter.java:124)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException: server of the University Complutense of MADRID could not initialize inside the servlet environment.
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:138)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:
at intradoc.shared.MetaFieldUtils.executeService(MetaFieldUtils.java:1264)
at intradoc.shared.MetaFieldUtils.updateDocMetaDefinitionTable(MetaFieldUtils.java:809)
at intradoc.server.datastoredesign.DataDesignInstall.populateDocMetaDef(DataDesignInstall.java:1570)
at intradoc.server.datastoredesign.DataDesignInstall.addOrUpdateDocMetaColumns(DataDesignInstall.java:1384)
at intradoc.server.datastoredesign.DataDesignInstall.configDocMetaForComponent(DataDesignInstall.java:1293)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:
at intradoc.server.ServiceRequestImplementor.handleErrorResponse(ServiceRequestImplementor.java:1810)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:830)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.shared.MetaFieldUtils.executeService(MetaFieldUtils.java:1260)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:! csUnableToEditMetaDefinition, xPartitionId! csSubjectRefreshError, dynamicqueries
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.Service.createServiceException(Service.java:2249)
at intradoc.server.Service.refreshCache(Service.java:3122)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:! csUnableToLoadSubject, dynamicqueries, intradoc.server.subject.DynamicQueriesSubjectCallback
at intradoc.server.SubjectManager.callSubjectCallbacks(SubjectManager.java:535)
at intradoc.server.SubjectManager.refreshSubjectAll(SubjectManager.java:404)
at intradoc.server.Service.refreshCache(Service.java:3116)
to recordsmanagement. RecordsManagementHandler.refreshCache (RecordsManagementHandler.java:8777)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
Truncated. check the log file full stacktrace
Caused by: intradoc.data.DataException:! csDSTablePrimaryKeyNotDefined, revisions
at intradoc.data.IdcDataSource.initQueries(IdcDataSource.java:351)
at intradoc.data.IdcDataSource.initQueries(IdcDataSource.java:80)
at intradoc.data.IdcDataSourceUtils.registerOrRefresh(IdcDataSourceUtils.java:39)
at intradoc.server.subject.DynamicQueriesSubjectCallback.defineMetaDataQueries(DynamicQueriesSubjectCallback.java:267)
to
intradoc.server.subject.DynamicQueriesSubjectCallback.refreshDynamicMetaQueries(DynamicQueriesSubjectCallback.java:116)
Truncated. check the log file full stacktraceAfter a few tries, here's what I discovered when improve US 10 gr 2 UCM 11 g Complutense University of MADRID.
Assuming that all measures are done like installing, indicates my research-1 create a schema of Complutense University of MADRID, using the tool of the UCR (11 g)
Notice that the DOCMETA table contains only 2 lines:
SQL > desc docmeta
Name Null? Type
----------------------------------------- -------- ----------------------------
NOT NULL NUMBER (38)
XCOMMENTS VARCHAR2 (2000 CHAR)2. start the server of the University Complutense of MADRID (11 g) for the first time successfully, you want that this runs scripts DDL/DML, one of them by adding columns of METADATA.
SQL > desc docmeta
Name Null? Type
----------------------------------------- -------- ----------------------------
NOT NULL NUMBER (38)
XCOMMENTS VARCHAR2 (2000 CHAR)
XEXTERNALDATASET VARCHAR2 (200 CHAR)
XIDCPROFILE VARCHAR2 (30 CHAR)
XTEMPLATETYPE VARCHAR2 (30 CHAR)
XPARTITIONID VARCHAR2 (30 CHAR)
XWEBFLAG VARCHAR2 (30 CHAR)
XSTORAGERULE VARCHAR2 (30 CHAR)If you need to change this pattern to add other attributes, its good to run ALTER TABLE instead of DROP/CREATE TABLE. My point is that, when the server of the University Complutense of MADRID starts for the first time (after the UCR is executed), it runs changing DDL/DML to sync for its needs.
The following error occurs if the schema of the UCM/data on the structure is not what expected the server of the University Complutense of MADRID. In this case, it tries to add the XPARTITIONID column when its already exists.
intradoc.common.ServiceException:! csUnableToEditMetaDefinition, xPartitionId! csUserInsufficientAccess, sysadminI hope this helps.
-RIOU -
L50D-B-146 satellite does not turn
Hello
I have a problem with my L50D-B-146 turns is not on. Very rarely, when I try to turn it on it works. Once I managed to turn on I tried to upgrade the Bios to 1.6 1.2, but you must restart your computer to complete the installation I couldn't because it does not turn on 99% of the time. The laptop didn't work before I tried upgrading the Bios is not the fault of the installation to fail. Also when I get to turn Windows works perfectly fine, until I have to turn it off again.
When I try to turn it on the power button light works and you can hear the fan, otherwise you may not even see the screen Toshiba Leading Innovation, so I don't think it's the fault of the window. I repeat again once you can activate from time to time, but very rarely. Also it is not the fault of the monitor that I connected the laptop to an external display, and again, there was a problem.
I would be very grateful for any solution to this problem
The solution to this problem?
I don't know if anyone here can offer virtual diagnosis and offer the working solution.
When the machine works sometimes such a problem is not easy to understand. Such behavior of the laptop must be analyzed and may be tested with diagnostic tools.What we do here, it's just to speculate at what may be the problem. Looks like the BIOS related issue. For some reason, from time to time your machine cannot pass the BIOS checking the material.
Have you already contacted Toshiba services and asked for help?
-
Given that I tried (without success) upgrade to windows 8.1, the backup on one of my failed disks can. I guess there could be a link with the drop in price, although I expect questions on the C drive in this case, not the D.
I use WHS 2011 as a backup solution.Even then the navigation to add or delete records assistants backup crashes (on the server)Chkdsk/R/f can't find a problem with the drive of the PC that must be saved.Error then traverse it to the backup volume:21776] 131023.202739.7518: backup: start sending the Volume Configuration131023.202740.2523 [21776]: backup: start the Set Machine name131023.202740.6667 [21776]: backup: Volume configured:131023.202740.6667 [21776]: backup: Volume configured: K:\131023.202740.6667 [21776]: backup: Volume configured: D:\131023.202740.6667 [21776]: backup: Volume configured: C:\{131023.202742.7307 [20976]: backup: VolumeCalculator: \\?\Volume{45232d2c-ea8e-47ed-8941-64a9833c5776 Volume} a 680192 FileRecords.131023.202802.5366 [20976]: backup: Exception in thread volumecalculator: Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.NtfsReaderException: FileRecord 514820 has an invalid bytesAllocbij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecord... ctor (Byte * pData, Volume volume, index of Int64, Boolean inUse)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecordReader.Next)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.FolderSizeCalculator.VolumeCalculator.Calculate (ProgressComputer progress, Volume volume)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.PCBackupClientProviderRoot. <> c__DisplayClassa.b__8(Object state) Any{131023.202742.7307 [20976]: backup: VolumeCalculator: \\?\Volume{45232d2c-ea8e-47ed-8941-64a9833c5776 Volume} a 680192 FileRecords.[20976] 131023.202802.5366: backup: Exception in thread volumecalculator: Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.NtfsReaderException: FileRecord 514820 has a field invalid bytesAllocbij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecord... ctor (Byte * pData, Volume volume, index of Int64, Boolean inUse)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecordReader.Next)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.FolderSizeCalculator.VolumeCalculator.Calculate (ProgressComputer progress, Volume volume)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.Provider.PCBackupClientProviderRoot. <> c__DisplayClassa.b__8(Object state) Error saving131024.091905.4746 [18712]: backup: ongoing. Percentage: 60131024.091905.5717 [24024]: backup: ongoing. Percentage: 61131024.091905.8380 [18712]: backup: ongoing. Percentage: 62131024.091906.2323 [24024]: backup: ongoing. Percentage: 63131024.091907.3674 [5348]: engine: Server phase Reorganize2 finish131024.091907.3674 [5348]: engine: Volume backup is complete for D: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy5131024.091907.5166 [5348]: engine: volume D: to start with.131024.091915.8085 [5348]: engine: size of the Volume (shadow) 3000352370688 used 1176319787008131024.091915.8095 [5348]: engine: start DoFileRecordPass[5348] 131024.091942.7333: engine: Exception: Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.NtfsReaderException: FileRecord 514820 has a field invalid bytesAllocbij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecord... ctor (Byte * pData, Volume volume, index of Int64, Boolean inUse)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.NTFS.FileRecordReader.Next)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupOperation.DoFileRecordPass)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupOperation.RunWithoutCatch)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupOperation.Run)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.RunWithoutCatch)bij Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupOp.BackupSetOperation.Run)131024.091942.7383 [5348]: backup: ongoing. Percentage: 63[131024.091942.7383 [5348]: engine: failure: ClientIoError, System.String]131024.091942.7383 [5348]: engine: D:131024.091942.7393 [5348]: engine: bytes sent = 901537781, bytes received = 34635735, 0 reconnects131024.091942.7624 [5348]: backup: completed. Status: Failed, error: ClientIoError131024.091942.7644 [19788]: backup: priority: 3 days since the last backup: window 0, start: 420, end of the window: 600, end computed: 510131024.091942.7714 [24276]: engine: using TLS to remove the dead backup SessionquestionFrom what I can gather from these log files a file located at FileRecord 514820 block everything. When I remove the D drive, the backup works without problem.Anyone any ideas how I can find the file in question? Or how I can get her working again from the backup?Right: finally fixed my problem.
-First of all, I moved all the files on the disk to another diskEven on an empty drive kept occurring the above problem.Finally, I reformatted the drive & copied data on the disk.After that everything worked fine.
Maybe you are looking for
-
How to install the recovery image on Satellite Pro A300?
I have a Satellite Pro A300 and I need factory reset. I learned from my teacher of computers there is a unknown virus on this subject. Apparently, it has been downloaded when I downloaded Malware bites. I got the laptop free of Set - BC because I mus
-
Hi I am looking for windows 7 hp dv2928se driversfor thw. At least, I need the nvidia nforce (ethernet) network controller. Thanks in advance Filipe
-
Music CD will not play automatically
After I start my computer, it goes through all the startup programs, etc, if I put a music CD in the CD player, it won't play. I checked the auto run settings and it is configured to automatically read the CD using Media Player. Any ideas?
-
Hi, did anyone know, if Muse CC2015 runs on Mac OSX 10.11 'El Capitan '? The system requirements on the Adobe site says, that she runs with 10.9 and 10.10. No word about 10.11.Thanks in advance and greetings from Vienna!