Anyobody can help with errpor "Assertion failure" after upgrade to Windows 10

Hi all

I used to run successfully Lightroom 5.7 on Windows 8, until recently, I've upgraded to Windows 10. Since then, I get an "Assertion failed" error and Lightroom does not open. I looked this error and seems to have been a common theme for LR 5.4 days. So I tried all suggested fixes, but even register controls and reinstalling did not help. I can't make it work. Now: What can I do? Any idea?

Hi oliverl,

Greetings.

While you hold down the ALT key, open Lightroom.
- New catalog, click on create a new catalog.
If the step above does not work, then provide the pictures read and write access folder.
- Right-click on the folder images
- Properties - Security - Edit - Add
- Type everyone
- Click ok
- Now check all boxes (full control)
- Click on apply, then ok

Concerning

Rohit

Tags: Photoshop Lightroom

Similar Questions

Problems with sleep and stopped after upgrade to Windows 10

Hello

So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

Any solution to this problem?

Thank you.
1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
6. Change back the setting of Windows Update Services to manual automatic (delayed start).
7. Restart your computer.
8. Rejoice! You can finally sleep and stop again.
-DanG

I can't creative cloud applications day after upgrade to Windows 10.

Uninstalling and reinstalling does not help, I can connect but after going to the application section I get disconnected after less than minutes.

Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

Don't forget to stay signed with your Adobe ID before accessing the link below

Creative cloud support (all creative cloud customer service problems)

http://helpx.Adobe.com/x-productkb/global/service-CCM.html

boot failure after upgrade to Windows 7

Had problems with the commissioning on a Windows 7 Home premium based computer laptop HP after the latest updates of nights. I can see the Logo screen for a second, the computer shuts down completely. I tried pressing the F2 key with no result. The systems dvd in the drive at startup does not alter at all. What can I do?

Hello

· Were you able to boot to the desktop after the update?

· Have you received an error message while you were trying to install updates?

I suggest you to start in safe mode and then perform system restore to a date where the system worked very well.

To start in safe mode follow the link below:

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Once you start using safe run System Restore to perform a restore of the system follow the article below:

http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

You can also try to start WINRE (Windows Recovery Environment) and try the system restore in case you are not able to boot in SafeMode as well.

To start WINRE following the link below:

http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

Thank you, and in what concerns:
Naman R - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Cannot print after upgrading to Windows 10

Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10. I have a HP officejet Pro 8600. I downloaded a new drivers, etc, and nothing works. Help, please

Hello Kathy,

http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

I need help with an installation failure to interpret and troubleshoot a Setup log.

Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

https://discussions.Apple.com/message/26309669#26309669

I used this method with success to install FCS2 in Yosemite:

[click on images to enlarge]

However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.

Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

Here is the post on MacRumors with pre-installed Setup log:

http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

Hello good I would like to cancel the annual plan of adobe audition,
As I have had problems with the software and the Bank, if I can help with that please.

Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

Creative single-app cloud membership for Adobe Audition (one year) Subscription Office March 11, 2015

In the case of any questions, please let us know, I can certainly go for you.

Concerning

Baudier

can't see the Dvd rom after the Update window window 10 7

can't see the DVD rom after the Update window 10 window 7.

Hi Michael,

Thanks for posting your query in Microsoft Community.

We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

Method 1: Run the troubleshooter of material and check.

Follow the steps to run the Troubleshooter:

a. type Troubleshooting in the search bar and click on it.
b. click hardware and sound.
c. click on Windows Media Player DVD and follow the instructions.

Method 2: Uninstall, reinstall the drivers CD/DVD.

a. press the Windows key + X , and then click Device Manager

b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
c. When you are prompted to confirm that you want to remove the device, click OK.
d. restart the computer.
e. After you restart the computer, the drivers will be installed automatically.

Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

How can I move windows 7 (not OE), to another machine after upgrade to windows 10?

I have a machine that has Windows 7 Ultimate installed on it, as a clean install from a CD with a code. I upgraded this Windows 10 machine and I want to spend the nec plus ultra 7 to another machine. How to "Uninstall" or "Turn off" Windows 7 in the computer being upgraded so that I can activate it on another computer after a clean install?

If you upgrade Windows 7 Ultimate edition free update of Windows 10, you cannot move Windows 7 Ultimate edition to another machine because the free update used Windows 7 Ultimate edition as an eligible basic license.

Only if you have installed a full version of Windows 10 license would you be able to transfer the license of Windows 7 to a new computer.

Otherwise, you will need to purchase a new license of Windows 7.

HP Touchsmart 23-d055: do I need a new recovery disk after upgrade to Windows 10?

I upgraded my 2 years, HP Touchsmart in Windows 8 for Windows 8.1 for Windows 10. It took me 6 hours to run all of these updates.

Now, HP Support Assistant keeps reminding me to create an image of system recovery. But when I run the recovery media creation utility, it warns me that he goes back to the original operating system (Win8). Is it possible to create a recovery image system for my machine on Windows 10?

I know that Windows 10 now has an automatic recovery partition. But I am concerned by the failure of the disk, which would make this unnecessary partition. Last year, when I've upgraded to win 8.1, I had an alteration of the disc that has occurred without known reason. I lost everything on the PC and to restore Win 8, and I've never touched the PC up to 10 Windows free update is out.

I created a USB Win8 recovery disk when I got the machine. This is my only alternative? I suppose that if I ran the recovery media creation utility, it would recreate just the same.

BTW, I know that HP has here a document, but it does on computers provided with Windows installed 10.
- HP computers - create and use a Microsoft recovery USB drive (Windows 10)
- http://support.HP.com/us-en/document/c04641788
Thank you for your help and experience.

Since no one has replied with an answer to my question, I've finally worked it on my own. I learned that you cannot make a new recovery disk system after the upgrade to Windows 10, if you had already created one when you got your machine under Windows 8.x

Context: after upgrade to Windows 10, the HP Support Assistant kept prompting me to create a system recovery disk. I did one when I got the machine 2 years with Win8. I didn't replace my original recovery disk, so I went out and got a new 16GB USB flash drive. When I inserted this new drive and attempted to create a recovery disk, the PC told me I couldn't do one, because you are allowed to make a recovery disc by PC.

So it was kind of stupid that after completing the upgrade of Windows 10, HP Support Assistant tells people to do. It should just check itself and see if a disc has already been done. All this anguish for nothing!

Second monitor is not detected after upgrade to Windows 10

After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

ASUS computer: can not scan wireless because I've upgraded to windows 10

Since I've upgraded to Windows 10 on my Asus computer, I can not connect through the HP Solution Center to scan. I have a HP computer I upgraded to 10 and everything works fine. I'm using version 14 of the softward.

If I wired my computer to the printer, I can scan, but can't scan remotely.

Can someone help me!

Hi @Lorraine9,

Thanks for getting back to me.

There is corruption in Windows. It is possible that the printer driver has been corrupted, so we will need to remove it and reinstall.

First, try the steps in this guide:
- HP printers - printer problems after upgrade to Windows 10
If the problem persists, follow the steps below to see if you can solve the problem.

Let's start by cleaning up your computer.
- Cleaning disc in Windows 10
- Perform the clean boot in Windows 10 / 8 / 7
- Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding:
- File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.
Remove printer drivers and reinstall:

If you use a USB connection between your computer and the printer please unplug this cable now.

Step 1: Remove the printer:
1. click on the Start button
2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".
3. click on programs and features to launch the window.
4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your HP Photosmart if you see that your HP Photosmart listed, click on it and choose uninstall.
5 follow the prompts on the screen to complete the uninstallation. Once the uninstallation is completed successfully, please close the programs and features.
6. then click again on the start menu
7. this time, type devices
8. click on devices and printers to open the window.
9. in devices and printers are looking for your HP Photosmart camera. If you see if please right-click on it and choose 'Remove' or 'delete '.
10. Once your HP Photosmart camera is like showing in devices and printers please click on any device under the list printers once just to highlight. Click on the above print server properties
11. click on the tab drivers
12. search for your HP Photosmart driver. If the list, please click it and choose Delete
13. select Remove Driver only
14. Select OK
15. click apply and then OK in the print server properties window.
16. close the devices and printers.

Please proceed to the next step.

Step 2: Install the device:
Please click here to download the full functionality of the software and the driver for your printer when the download is complete, follow the guests on the screen to install your printer.

If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect.

Once installation is complete, please try printing and scanning.
Source published by my colleague @X-23.

If the problem persists, continue.
- Make sure all Windows updates are updated on the computer.
Then try to open the hidden administrator account and try to reinstall.
- How to enable the hidden administrator account Windows 10
If the problem persists, create a new user profile and try again.
- How to create a new Local user account in Windows 10
If the problem persists, you may need to reinstall Windows 10

I hope this helps. Please reply to this message with the results.

Blu Ray does not work after upgrade to Windows 7 64-bit

Hope someone can help with this problem. I found a lot of forum and users with similar problems but I can't solve this problem.

I bought this HP Pavilion DV7-1055EA about 3 years ago the drive blu - ray one of the points of sale, it was loaded with Vista 32 bit. After making this computer has 4 GB of RAM instead of 3, I did a clean install of windows 7 64-bit. After which my Blu Ray player stopped working.

When inserting a CD/DVD, the drive works fine and everything is as usual, however when insert a Blu Ray disc windows does not recognize the drive IE "drive is empty".

Different things, I tried to set the inclusion of the problem, reflashing the BIOS, install the latest firmware, re - install the game media, installed PowerDVD but without any change in the symptoms.

Can someone help with this problem? Well, I'm stuck on this one like blu ray readers are not my strong point in computers. Maybe HP (in their wisdom) printed a digital brand on the device which prevents him from being compatible with more recent versions of windows? I talked to HP however my warranty has expired I do not pay £15 for a fool to tell me to come back for win vista (which is the worst OS known to man kind) or that there is no solution available. Help, please?

Hello

After writing this last post, so I decided to download Nero Info Tool to look at information from drive etc.

The program asked if I could put in a disc to test the speed of running, so I thought... what the hell I'll put in a blu - ray disc and see what happens.

Next thing I know that running speed test took place then everything suddenly the blu ray kicks in life and he was here... smooth as the more calm waters, known for the kind of man... my blu ray film.

Reboot the machine and now the blu - ray player works fine. Any idea on what just happened?

Black screen after upgrading to Windows 10

I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

can help me, thanks

Bill

Hello

I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

Hope this information helps.

Please get back to us with an update on the issue, we will be happy to help you.

Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

Help please

Hi asalamk,

The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

Anyobody can help with errpor "Assertion failure" after upgrade to Windows 10

Similar Questions

Maybe you are looking for