upgrade to driver issues made worse?

Similar Questions

• Display card driver issue (Digital Signature of the unverified driver)

  In Device Manager, I have a question, marked by an icon of yellow exclamation next to "ATI Radeon HD 3200 Graphics" under the heading "graphics cards".  When I right click and go to properties I see the message: "Windows cannot verify the digital signature for the drivers required for this device. A recent... (Code 52) ».

  My graphics card is built into my motherboard, which is the GIGABYTE GA-MA78GM-S2H Micro ATX AMD.

  I have not install my own drivers, I let Windows 7 install drivers for me.  What do you recommend to resolve this unsigned driver issue (e.g. should I look for an ATI driver perhaps?).

  Thank you

  Hi BDub2

  Welcome to the Microsoft Answers Forum!

  We would like to know if you've made any recent software or hardware changes made to your computer.

  We receive this error if the driver has been modified. I would recommend with these methods

  Method 1:

  Uninstall and reinstall the device in Device Manager. Steps to uninstall the device:

  i. click on start, type devmgmt.msc and then on enter.

  II. Locate the display adapter device

  III. right click on the device and select uninstall

  IV. restart the computer to make the changes happen

  Uninstall and reinstall the card program and features. Steps to follow

  i. Click Start and select Control Panel

  II. in the Control Panel double-click the "Programs and features" icon

  III. here you can find all the programs and items that are installed in Windows 7.

  IV. to remove the adapter click once on the program and then click Uninstall/change, and follow the prompts.

  v. install the last driver on the manufacturer's Web site. Download the Windows 7 compatible display driver.

  Link: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Method 2:

  Run a scanner online to check any malware or virus activity. Links below will help you to scan on the computer.

  http://www.Microsoft.com/Security_Essentials/

  Download

  Link for reference: what is a signed driver?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-signed-driver

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 15-d005TU Notebook PC: upgrade HARD drive internal for laptop

  The internal HHD is short on free space and I need to replace it with a larger one. The existing one is 500 GB, SATA and 5400 RPM.

  What should I look for when you buy a new?

  Any internal HARD disk will be suitable and compatible or am I looking for something specific?

  Any internal hard drive 2 TB will be suitable and compatible?

  Since the existing one is using a 5400 RPM, one, can I use one with 7200 RPM? There will be compatibility and or overheating problems?

  Thanks for your reply.

  I don't think not laptop 2 TB drives are made with the rotation speed of 7200 RPM. They are all 5400. 7200 TPM is larger than 1 TB. But, to answer your question directly, you can use any 2.5 inch wide and 7mm or 9.5 mm thick hard drive SATA or SSD on the market. The physical dimensions of each of them are the same, that is the industry standard interchangeable. No compatibility or heating problems.

  http://www.Amazon.com/Seagate-laptop-2-5-inch-internal-ST2000LM003/DP/B00MPWYLHO/ref=sr_1_2?ie=UTF8&QID=1455969492&SR=8-2&keywords=2TB+laptop+hard+drive

  See p. 81 of the manual here:

  Manual

  The access door on the bottom does not contain hard drive. Access to the hard drive takes a broad dismantling so be careful. It will jeopardise any warranty you have left.

  Post back with any more questions as the migration of software/resettlement.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Firebird 802 - upgrade hard drives - Solid State / hybrid anyone?

  I'm upgrading hard drives on my Firebird 802 (the part the WEAKEST of my Firebird and the SMALLEST score on Windows Index). I replaced the drive secondary with a Seagate 500 GB SATA drive at 7200 RPM (ST950042 4AS) and REALLY improved performance (I have my file on the secondary drive).

  It's now time to upgrade the MAIN disk. I'm looking at a "Hybrid" car A Seagate ST95005620AS Momentus XT 500 GB Solid State Hybrid Drive - 500 GB, 7200 RPM, SATA 3 Gb/s.

  Has anyone tried upgrading the main drive of a hybrid? For a solid Sate drive?

  Thank you

  Enzo

  Well WELL, @ 10:39 PM PST after FOUR and a HALF and TWO attempts of the hybrid drive WORKS as my main drive on my Firebird 802!

  Using the data transfer software CMS Bounceback ($14.99 per download) the program was missing several files that were essential for the computer to boot. Once I checked the transfer journal and moved the files myself IT BOOTS!

  THUS, in a few weeks, I'll post the kind of increases in speed that I experience. First comment, my drives are running @ 98 degrees F. It's HOT, so I'll have to come back a fan for the hard disk enclosure, in fact, you can put at the front of the box and jump through this background grid. Going to put in place tomorrow. Now I'm BEAT!

  Thus, it CAN BE DONE on your Firebird! Solution, HERE!

  Thank you!

  

• Activation on upgrade hard drive on a MAC

  Upgrade hard drive on a mac, running windows on the same computer - activation code for windows is no longer valid, cannot run windows cannot get numbers of activation support

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• 6400 upgrade Hard Drive just SHRUNK... Once again!!!

  First of all let me state that I am ready to throw my computer and TWO 2, TWO Yes upgrade hard drives out of my 2nd floor window!

  OK, my wind is done, for now.

  I have an Inspiron 6400 with HDD 80 GB of origin (73.1 GB space.)  I wanted to go to a Western Digital 250 GB hard drive.  I bought the drive and cloned it.  My first attempt was a purchase Norton Ghost program (after the $150 for the reader, that's another $50 for the program) I cloned it from the laptop via a USB - SATA connection.  Everything seemed fine, until I swapped hard drives.  He got through the BIOS, no problem, then started to windows.  Immediately, it projected blue and that was that.  Swap return original hard drive, everything OK.  Put old drive in the spare computer/SATA slot and realized that the reader shrunk to 73.1 GB. . the SAME SIZE as the original drive.

  After days/weeks and literally probably 5 to 6 hours of troubleshooting, downloading about 4-5 programs, utilities, etc, and have EVERY single utility, test and program otherwise tell me the car was very good (less the fact that he was now 170 GB smaller) I thought that drive was simply bad then returned.  (After fighting with Tiger Direct, I had to return it directly to WD, but they at least sent me a replacement unit before that I had to return the first...  (where my 'two' drives))

  So I have the new, 2nd hard drive in hand and I say to myself that I would be the clone differently, from my desktop (Dell 690) who had a few ports SATA spare on it.  I cloned it with a different program and once again, everything seems to be okay.  It showed in my office.  This time, I've set manually the new disk partitions to what I end up with.)

  So I put the new, larger, cloned drive in the computer, booted and BAAM!  Exactly the same thing.  Blue screen stop...  And guess what... The drive is now 73.1 GB. . and once more, there is nothing I can do to bring back to 250 GB... any computer, software, utility, etc. I throw at it or throw it out in...

  Back to Western Digital... but this time, I don't know yet what to say or how to proceed.

  My questions are:

  1. What is happening and why I can't get a 250 GB drive in the machine.  (I can't find ANYWHERE a maximum limit of hard drive)

  2. any thoughts on how to get my drive to the correct size of declaration?

  I'm really steam it... I have never spent so much time on what should be a simple question in my 15 years and more and about 20 + systems of computers through my hands...

  Thanks in advance

  Blake

  Message edited by blakemiller 27/03/2008 17:05
  
  

• Can not activate CS4 Web Premium after the upgrade Hard Drive Mac OS x 11.3

  I can't access any program now CS4 after upgrade my hard drive to an SSD. I get a small dialog box saying "license for this product has stopped working. Error code 150:30"MacBook Pro, OS X 11.3 (el Capitan). The chat tech support person told me that CS4 is "not compatible" with El Capitan, but I've been using Cs4 for several months now with El Capitan, so it's not true.

  In the past, when I've got a new Mac or upgraded the operating system, I had the opportunity in an Adobe dialog to enter my serial number in, but this is not the case now.

  Nothing has changed since this morning except my newly upgraded hard drive. Except that this time I don't have a way to enter my serial number and reactivate.

  Can anyone help?

  Error 150:30 - error "Licensing has stopped working". Mac OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• HP Pavilion dv7-4150er upgrade complete. Issue of processor and HARD drive

  Hello. Sorry for my English. I'm from the Ukraine.

  I want to improve my HP Pavilion dv7-4150er and I need advice from experienced people.

  Now, I have:

  -8 GB of RAM (2 x 4 GB),

  -1 TB of HDD (5400 RPM)

  -stock video (Mobility Radeon hd 5650 graphics card) card overclocked to 700 MHz GPU and 950 MHz Vram.

  -CPU (mobile Quad Core Intel Core i7-720QM, 1716 MHz) in stock

  -BIOS F.29

  2 problems:

  -Slow CPU

  -Slow HARD drive

  I want to buy a few HARD drives SSD for Windows and secondary soft and left for the data.

  Get an increase in the performance of the system?

  On the 'Intel' site, I read that my

  Intel® HM55 Express Chipset Mobile

  is compatible with the more powerful processors. LINK

  And I have a great opportunity to buy Intel® Core™ i7-940XM processor Extreme Edition (8 M Cache, 2.13 GHz)

  But the laptop manual says:

  720QM and 940xm - identical processors. The difference in 'MAX TDP' 45w/55w, 'Cache' 6 mb / 8 mb and clock speed 1.6 GHz/2.13 GHz

  The Intel® Core™ i7-940XM processor Extreme Edition (8 M Cache, 2.13) will work properly in my laptop?

  or not?

  I have read many articles on this topic, but the answer is not...

  And I can't find information on HP F.29 BIOS specification.

  How can I increase a CPU nested way (with another compatible processor) perfomance if 940xm is not compatible?

  Help me please.

  Thank you for your time.

  Hello nickiblackmore.  I understand that you are curious about the upgrade of your laptop.

  Here is a link to Guide of Service and Maintenance of your laptop.  It covers the disassembly of the laptop and can also show you how to replace parts if you upgrade the.

  If you switch to a Solid State Drive of a standard 5400 or 7200 RPM hard drive, you should see a significant performance increase.  This is because a normal hard drive spinning platters and it takes time to locate data on the trays as they are moving.  A Solid State Drive has no moving parts and therefor can locate data much more quickly.

  A CPU upgrade is a much more difficult question.  HP does not recommend that you perform this type of upgrade.  Laptops are generally designed with specific thermal and electrical needs.  If you change the CPU, it will probably create more heat and use a higher power that will cause you problems.  However, if you stick to a processor that is listed in the service (for example in your picture) Guide, you should be fine.  For example, you can choose one of the microprocessors found in the image to upgrade your laptop.  Also, keep in mind that the integral part upgrade as a CPU can affect your warranty (check your warranty here).

  If you think that answers your question be sure to mark the post as solved.  This makes it easier for others to find answers to their questions.

  Have a great day!

• Lazerjet Pro 200 color MFP 276: upgrade Windows 10 has made Lazerjet Pro 200 color MFP 276nw as an "optical drive".

  We have recently improved our HP Pavillion with Windows 10.  Our Lazerjet is now recognized as an "optical drive" in devices and he refuses to accept it as a printer.

  I have gone through the HP site, downloaded HP Solutions Framework Support, followed the instructions and have done with it still in the devices category and so unable to use it as a printer.

  The audit "'http://support.hp.com/gb-en/document/c04658195 ' for compatibility of printers, the n version but not the nw."

  Any help would be appreciated.

  Best wishes

  Deri

  Please follow this path from the front panel of your LaserJet.

  Thank you

• Issue of upgrade hard drive?

  My Dell Inspiron 1300 currently holds

  Internal hard drive 80 GB 5400 RPM ATA-6

  but I also have another hard disk of a computer parts, a friend gave me

  120GB (5400 RPM) SATA Hard Drive

  I was wondering if I could swap the two of them "safe".

  and had no problems

  If there is any other info you need just lemme know.

  Thanks for any help

  
  

• HP Pavilion a1777c: a few Driver issues Pavilion a1777c

  Gentlemen.
  
  I am looking for Vista drivers for an a1777c flag. I noticed on the driver download page for this model that some of the downloads are available in 32-bit or 64-bit. The drop-down list lists only 'Vista' with no designations of 32 or 64-bit operating system. Does it matter that few of note from the original installation media for HP used? I currently have a 32 bit Vista disc so I can use that even if the original version of HP was 64-bit? I know I can't use 64-bit with a 32-bit installation drivers, I wonder if it's important, if I install the same bit-version of Vista computer comes with.
  
  I don't see the drivers for chipset on the driver download page. Traditionally, this is is the first set of drivers that you install. I see an update of the bios, an update to the Intel® Viiv™ software and drivers for an Intel Matrix Storage Manager, but that's as close as something seems to come for the chipset drivers. The driver download page actually has all the necessary or I have to go to ASUS (who made the motherboard P5LP - THE) for the actual chipset drivers? If the latter, I do not know why these drivers would not appear on the HP driver download page, or at least a rating and the link to go directly to ASUS.
  
  Also, I noticed an update for Roxio Creator Application. Given that I don't have the original installation material would be a waste of time trying to install this software? I installed the drivers for another HP computer which has had an update to Roxio and the update would not move because he could not find any earlier version to update. Same thing here?
  
  Your interest is appreciated!
  
  Grant

  Hello, concession.

  GHagen wrote:
  

  Gentlemen.
  
  I am looking for Vista drivers for an a1777c flag. I noticed on the driver download page for this model that some of the downloads are available in 32-bit or 64-bit. The drop-down list lists only 'Vista' with no designations of 32 or 64-bit operating system. Does it matter that few of note from the original installation media for HP used? I currently have a 32 bit Vista disc so I can use that even if the original version of HP was 64-bit? I know I can't use 64-bit with a 32-bit installation drivers, I wonder if it's important, if I install the same bit-version of Vista computer comes with.  The best way to determine if the driver is working is to try to install it.  If it's not compatible it will simply say so.  There are 32-bit come running on an operating system 64-bit.  An example of this is Adobe Flash Player.  I had to run the 32-bit version several times.
  
  I don't see the drivers for chipset on the driver download page. Traditionally, this is is the first set of drivers that you install.  You are right.  There is no Chipset driver for 945G chipset.  I even tried the Intel site, and they do not show one for Vista.

  I see an update of the bios, an update to the Intel® Viiv™ software and drivers for an Intel Matrix Storage Manager, but that's as close as something seems to come for the chipset drivers.  If you try to install the BIOS update, please be extremely cautious.  An update of the BIOS has failed is the best way I know to create a good boat anchor.

  The driver download page actually has all the necessary or I have to go to ASUS (who made the motherboard P5LP - THE) for the actual chipset drivers?  Motherboards HP and BIOS' are being owners, they are not the same as the retail version of the mobe even.  You can use drivers that are developed by HP in most cases.

  If the latter, I do not know why these drivers would not appear on the HP driver download page, or at least a rating and the link to go directly to ASUS.
  

  
  Also, I noticed an update for Roxio Creator Application. Given that I don't have the original installation material would be a waste of time trying to install this software? I installed the drivers for another HP computer which has had an update to Roxio and the update would not move because he could not find any earlier version to update. Same thing here?  You can do a test to see what happens.  I know that a lot of apps that is posted as updates are in fact to be a complete application.  In the last upgrade Windows versions were full versions, but do not appear as such.
  
  Your interest is appreciated!
  
  Grant

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• upgrade hard drive shows old size

  I have a HP Pavillion Elite four years old m9500z.  I had a hard drive failure, so I installed a new hard drive.  I did a system repair disc, and then made an image of an external hard drive system.  Everything went very well.  After completed I installed the repair disk, shut down the computer, removed and installed the new hard drive.  The old hard drive was 320 GB and the new drive is 2 TB.  Reinstall it also seemed to go well.  After the relocation was complete I started the computer and everything looked good and has a great.  I checked the 'computer' to see the new hard drive, but it showed the size of the old 320 GB drive.    This computer has Vista and I upgraded to 7, so I did that upgrade disc that is why I made the image of the system.  Any suggestions?

  

  Thanks am... everything worked and all is great!

• G4-11125dx: USB Driver issues HP Pavilion g4-1125dx Notebook PC model #: LW342UA

  Hello.  I have a:

  HP Pavilion g4-1125dx Notebook PC

  Model #: LW342UA

  When it has been upgraded to windows 10 I lost all USB functionality.  The Device Manager uses a driver, but it does not work properly.  "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" have the yellow exclaimation points with the USB symbol next to them.  Under properties, it reads:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I try to roll back the driver nothing is available.  When I try to update, it says I already have the best driver.  I tried the windows update and Easy Driver software but no luck there.

  I confirmed that I do infact has power to make ports (USB fan :/) so I don't think that it is a hardware problem, especially since it worked before upgrade.)

  I know that its a laptop older, but I upgraded the CPU to a quad core Phenom II N970 and this 'thing' is running if good, I do not give up on it.  Ethernet and wireless are working properly and there is no other troubled hardware issue.

  Thanks in advance,

  Cory

  I tried to go back to windows 7, but I've been spending the period from 30.  The laptop is not the recovery disks, or a partition to do.  For the heck of it I advanced and reinstalled windows 10.  Now the USB ports work correctly so I guess it was something that happened during the initial upgrade?  Anyway thanks for your help!