Upgrade to ESXi 4.1 Update 2 to ESXi 4.1 Update 3 with HP BL685c G7

Similar Questions

• upgrade to esxi 5.0 on x3650m3s with NETWORK adapter problems

  I have a 3 host cluster that I'm trying to level. Update Manager has been delay on clean up the hosts so I plugged an ISO bootable USB to the machine. He went through his sequence start-up and ISO. It passes through and starts installing ESXi allows at the end where it installs "nfsclient" and then begins on an error: there was a problem with the device network specified on the command line. Error: No NIC MAC address found: XX. The address that it is is the FCoE QLogic card installed. It's the card that was running 4.1 traffic without problem.

  The card itself is fine and even visible in the form of map in UEFI system information.

  Has anyone seen this?

  Qlogic 10 Gb CNA adapter for x3650M3 (1800-42) requires driver qlge - 1.0.0.47 for ESXi 5.0.  It is in the compatibility guide.

  Search for IBM 42 1800 in VMware of HCL part number: http://www.vmware.com/go/hcl

  If you're ready to do a new install of ESXi 5.0 instead of upgrading, you can also use the ISO ESXi 5.0 cumulative hotfix driver 2 to get this driver installed during installation.

  ESXi 5.0 driver Rollup 2: http://downloads.vmware.com/d/details/rollupiso_50_2/dHRAYndlZEBiZHAlJQ==

  The release notes for that ISO contain a list of drivers included with it, which is qlge1.0.0.47.

• Dell M620 (VRTX) blade - ESXi 5.1.0 Update 1 installation upgrade to ESXi 5.1.0 Update 3 (latest)

  This morning I did an installation of upgrade to ESXi 5.1.0 Update 1 to ESXi 5.1.0 Update 3 (latest Version) on one of the blades of my VRTX M620 three 3.  I have the same problem that I met about a year, when I tried to update 1-2 update.  I had to go down to 1 update to see the data store.

  With update 3, the data store does not appear on this blade.  I did a scan to see if the data store is present, but he did not.  Also, I restarted the blade which did not help.

  I have to keep upgrading to 3 update due to the necessary correction of problem CBT.

  How to troubleshoot and resolve this problem of my data store does not?

  Note: I have very little experience with virtualization.  I just found today on how to access the interface from the CLI of blades.

  Thanks in advance.

  SOLVED.

  The original sas megaraid drivers (even installed on the blades of M620 Dell) had to be installed.  It is my understanding that several versions of the megaraid sas driver provided on the Dell ESXi ISO are meant to satisfy the VMware HCL for this material.  However, the more recent does not show the data store.

• upgrade to esxi 5.1 to 5.5 by using Update Manager

  Hi I tried to upgrade the ESXI 5.1 to 5.5

  I myself vcenter all done with the Update Manager, but I get this error when I import the image:

  exception of 5.5 web VMware update manager

  How can I fix it.

  Thank you.

  Nathan Saunders.

  VMware KB: Download Update Manager Operation fails with the error: a web exception has occurred during the upload of a file

  It will be useful.

• Error after upgrade to ESXi 5 Update 1 on free version

  At all a ghettoVCBg2 got another run properly after the upgrade to ESXi 5u1 via vMA 5 when it's the free version?

  I have a couple of free machine and they are the only ones having problems. My verson licensed production work very well.

  The error I get on free machines is as follows:

  Failed to get vim_service - the session object is not initialized or not connected to the line /usr/lib/perl5/5.10.0/VMware/VICommon.pm 1654
  Perl came out with active threads:
  1 running and spare
  0 finished and spare
  0 running and detached

  I find autour and trying different solutions to simular errors (for example, by adding the debugging of CARP), but nothing works.

  None of the 1 post update fixes fixed either.

  ghettoVCB works very well on the free servers however.

  So, I'm curious if anyone has seen this problem?

  I guess that the reason is that ghettoVCB2 was built for the paid editions that allow write API access.

  There was some editions which do not restrict this access, as you can see in "Support of ESX/ESXi Version table" at http://communities.vmware.com/docs/DOC-9843. The initial version of ESXi 5.0 is / was one of them, considering that the update 1 is even more restrictive.

  André

• failure to update bundle Dell Open manage offline after the ESXi 4.0 upgrade to ESXi 4.1

  Hi all

  My service manage Open Dell failed on my Dell Power Edge Server after the upgrade to ESXi 4.0 to ESXi 4.1. I know that I need to update the bundle off line Dell manage open to a newer version to run on ESXi 4.1. However, everything I did on updating bundle Dell Open manage, it just gave me the below error:

  C:\temp\2 > "c:\Program Files (x 86) \VMware\VMware vSphere CLI\bin\vihostupdate.pl"-Server 172.16.3.28-i b OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX40i_A00.9.zip

  Enter the user name: root

  Enter the password:

  Please wait install the fix is underway...

  No ballots or VIB were found in the metadata. No bulletin for this dish

  form could be found. Nothing to do.

  I know that the command is correct I can install correctly the Bundle open offline manage a FRESH ESXI 4.1 Installation on a test server. However, I do not want to and cannot start early on my production server. An idea to work around this problem is especially welcome!

  There is an another vib for ESXi 4.1.  Try to install OMSA go http://ftp.dell.com/sysman/OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX41i_A00.8.zip.

• After Esxi 5.1 USB passthrough problem upgrade to Esxi 6. 0 b

  Hello

  Recently, I upgraded my ESXi host from version 5.1 to 6.0.0.2809209. Passthrough ESXi 5.1 USB worked without problem. I updated 5.1 to 6.0 when usb smart card readers is connected. Now USB smart card readers did not appear on ESXi 6. 0b.

  I couldn't find any usb tethering in settings of the virtual computer .

  

  output file /var/log/USB.log

  
  

  2015 10-12 T 19: 30:10Z usbarb [33783]: VTHREAD initialize the main thread 3 "usbArb" pid 33783
  2015 10-12 T 19: 30:10Z usbarb [33783]: DictionaryLoad: could not open the file "/ usr/lib/vmware/config ': no such file or directory.
  2015 10-12 T 19: 30:10Z usbarb [33783]: preferences PREF file optional not found in/usr/lib/vmware/config. Using the default values.
  2015 10-12 T 19: 30:10Z usbarb [33783]: DictionaryLoad: cannot open the file '//.vmware/config': no such file or directory.
  2015 10-12 T 19: 30:10Z usbarb [33783]: found option preferences of PREF file in / / .vmware/config. Using the default values.
  2015 10-12 T 19: 30:10Z usbarb [33783]: deactivation of the preferences of the user PREF because disableUserPreferences is set.
  2015 10-12 T 19: 30:10Z usbarb [33783]: PREF cannot load the user's preferences.
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - PARAMETERS GLOBAL/usr/lib/vmware/settings
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - NOT PERSISTENT
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - USER PREFERENCES
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - default USER IS //.vmware/config
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - HOST by default IS/etc/vmware/config
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT libdir = ' / usr/lib/vmware. "
  2015 10-12 T 19: 30:10Z usbarb [33783]: authd.proxy.nfc = DICT ' vmware - pass: ha - nfc ".
  2015 10-12 T 19: 30:10Z usbarb [33783]: authd.proxy.nfcssl = DICT ' vmware - pass: ha-nfcssl. "
  2015 10-12 T 19: 30:10Z usbarb [33783]: authd.proxy.vpxa - nfcssl = DICT ' vmware - vpxa:vpxa - nfcssl.
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT authd.fullpath = "/ sbin/authd '.
  2015 10-12 T 19: 30:10Z usbarb [33783]: DICT - SITE by default IS/usr/lib/vmware/config
  2015 10-12 T 19: 30:10Z usbarb [33783]: USBArb: error in ' / etc/vmware/usbarb.rules' at line 1:0, ' [' or ' {' expected near end of file.}]
  2015 10-12 T 19: 30:10Z usbarb [33783]: VMware USB Arbitration Service Version 13.1.14
  2015 10-12 T 19: 30:10Z usbarb [33783]: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.
  2015 10-12 T 19: 30:10Z usbarb [33783]: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket
  2015 10-12 T 19: 30:10Z usbarb [33783]: SOCKET connection failed, error 2: no such file or directory
  2015 10-12 T 19: 30:10Z usbarb [33783]: USBArb: unable to connect to the existing arbitrator.
  2015 10-12 T 19: 30:17Z usbarb [33783]: USBArb: UsbArbPipeConnected: connected to the client socket: 12
  2015 10-12 T 19: 30:17Z usbarb [33783]: USBArb: 34213 Client connected (version: 6)
  2015 10-12 T 19: 54:37Z usbarb [33783]: USBArb: customer closing, error: 2
  2015 10-12 T 19: 54:37Z usbarb [33783]: USBArb: 34213 Client disconnected

  lsusb and tail f /var/log/vmkernel.log | grep-i USB

  output of commands is empty.

  
  

  usbarbitrator chkconfig - list

  usbarbitrator on

  How can I solve this problem?

  Thank you

  OK I solved my problem.

  (1) I remove material passthrough.

  (2) I have been fallow in Re: error Usb referee 6. and 7. advice.

  And I am able to reach USB CCID of Esxi 6.0 virtual machine host.

  Thank you

• How to upgrade the esxi 5.0 and 5.5 only give me the step in process setp.

  How to upgrade the esxi 5.0 and 5.5 only give me the step by step process.

  There are several methods supported for direct upgrade to 5.5 ESXi are:

  • vSphere Update Manager.
  • Interactive update of the CD, DVD or USB drive.
  • Scripted upgrade
  • esxcli
  • Automatic deployment

  You can find each method in this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2058352

  Also a good interactive video updated via CD/DVD/USB. Upgrade to VMware ESXi 5.5 using Setup Interactive - YouTube

• HP DL360 gen5 - is - it safe to upgrade to esxi 6.0?

  I know that the DL360 g5 has been out of the list of compatibility for some time now, but this is the box I have humming perfectly with 5.5 ESXi.

  I want to upgrade to esxi 6.0 (from the vib warehouse), but I fear that if the network and storage adapters will continue to work:

  1 adapter Gigabit Broadcom NC373i

  2. smart Array P400i

  3 631xESB/632xESB IDE controller

  I could not understand my way through the Compatibility Checker (or could not find these listed), but then I updated my HP N54L critical box non-production of esxi 6.0 without problems and it is not as compatible either.

  So if anyone has a DL360 gen5 (or a box with similar storage/network adapters listed above) and if you tried to upgrade to esxi 6.0 let me know whenever your upgrade was successful or not.

  Thank you!

  If despite this: VMware KB: devices obsolete and unsupported in VMware ESXi 6.0 who says P400i support is out or endangered, I found a few posts online saying that P400i still works in esxi 6.0 and I did the vib updated for the esxi itself as well as HP drivers and utilities:

  esxcli network firewall ruleset defined true httpClient - r EI

  Update profile of software esxcli d https://hostupdate.vmware.com/software/VUM/PRODUCTION/main/vmw-depot-index.xml Pei ESXi 6.0.0 - 20150404001-standard

  software esxcli vib install d http://vibsdepot.hp.com/hpq/latest/index-drv.xml

  software esxcli vib install d http://vibsdepot.hp.com/hpq/latest/index.xml

  esxcli network firewall ruleset defined false httpClient - r EI

  reset

  Started system and VMs loading properly.

• The upgrade to ESXi 4.1 with storage iSCSI software to ESXi 5.5

  I intend to upgrade ESXi 4.1 with which I have attached to ESXi 5.5 iSCSI software storage

  I've updated all my guests who were on the SAN storage with no problems.

  I would like to know that if it there's nothing I should take care before I update the host connected iSCSI to ESXi 5.5, as for the hosts with SAN attached storage I made to remove the cables of SAN before upgrading the host.

  Also, if all known problems, you will be informed during the upgrade to ESXi 4.1 to ESXi 5.5 with iSCSI Software storage, please let me know?

  If there is no different process to upgrade coz in ESXi 4.1 I do not see this link ports of iSCSI vmkernel ports software iSCSI but I know in ESXi5.5 we have to or I just launch a procedure of standard upgrade via the Update Manager and everything will be taken care?

  Thanks in advance

  With ESXi prior to version 5, linking ports had to be done via command line. However, if it has been configured correctly, you should be able to upgrade to ESXi 5.5 (assuming that the host has not been previously updated since version 3). BTW. the last time that I disconnected the host of storage for an upgrade has been with ESX 3.0.

  André

• Is there a limit on the number of times you can upgrade an ESXi host?

  We have VMware hosts that have been updated to ESXi 4.1 5.1 using the Update Manager.  Wouldn't we be ok to update these servers ESXi 5.5 or 6.0 without having to do a fresh install and reformat?

  Thank you

  I don't know if there is a limit to how many times where you can upgrade, but the upgrade to ESXi 4.1 to 5.1 and 5.5 is supported and works (I just tested it in my lab).

  For reference, here's the relevant articles;

  VMware KB: Methods of upgrade to ESXi 5.5

  Supported upgrades to ESXi 5.5.x

  See you soon,.

  Jon

• I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I was able to ping before the update. Test management system also fails to ping the default gateway.

  I sent a private message you, could answer you on this one here? Got iso's, he's now testing in my lab, but I don't have that kind of network cards, you will need to do the real test for me.

• "No found compatible network adapter" Blade HP VirtualConnect upgrade to ESXi 5

  Hello

  I just upgraded a HP Proliant BL490c G6 of ESXi 4.1.0 to ESXi 5.0 U2. The host started OK but did not find the network interface cards. The exact error message at logon on the screen is "no compatible network adapter found. Please consult Hardware Compatibility Guide (HCG product) for supported cards. »

  The host uses HP Virtual Connect for networking.

  As a host ESXi 4 that there worked.

  Using Update Manager 5 it has been then upgraded to ESXi 5 using the Image of ESX Custom HP (HP - ESX - 5.0.2 - standard-iso build 914586), which is when he lost the network cards.

  (A similar upgrade of a G7 BL490c in the same chassis worked well)

  When the blade reached ESXi version 4.1 network cards appeared in the viclient like Broadcom NetXtreme II 57711E/NC532i 10 Gig Ethernet.

  A look at Versions of driver in HP provided images VMware ESX/ESXi http://h18004.www1.hp.com/products/servers/software/vmware-esxi/driver_version.html shows that net-bnx2 - Version - 2.2.1l.v50.1 - 1 & net-bnx2x - Version - 1.72.54.v50.2 - 1 are both included in the image of the building.

  VirtualConnect firmware is version 3.15

  Can someone tell me what is wrong and how to fix it?

  See you soon

  Guy

  You must start the server blades with the "HP for ProLiant Service Pack CD" to update the firmware of the NETWORK adapter.

  Online firmware updates are also possible (using "Smart Components"), but unfortunately not for the network adapters.

  See my HP & VMware links page for the relevant download links.

  -Andreas

• upgrade to esxi 4.0.0.208167 to 5.1

  What is a 4.0.0.208167 and 5.1 upgrade support esxi

  208167 is updated 01, and it is listed as supported in VMware products interoperability Matrices.

  

• Upgrade to ESXi 5.0U2 5.1 - Supermicro X7SBi

  Hello.

  Supermicro X7SBi lost the network (the two network interface cards) after the reboot, during the upgrade to ESXi 5.0U2 to ESXi 5.1 via the Update Manager.

  Local console poster version 5.1 ESXi and correct IP settings.

  After zero manual host starts in response ping for about 6 seconds and then disappears again.

  Has anyone come across something like that?

  Sorry I should have been clearer with this statement.

  I've got new SuperMicro X9SCM-F mother card and an old X7SBi both require Intel e1000 drivers.

  On the X9SCM-F with ESXi versions 5 and 5.1 only one of the two NICS, the custom driver is required for the additional NIC to work.

  On the X7SBi with ESXi version 5.1 or work two NICS, the custom driver is required for any NETWORK adapter to work.

  Also, I should mention I didn't write or have any participation making the custom driver, I came across it looking for solutions to my first problem, and it seems to have saved me again.

  I'm sure that VMWare will fix these problems in the future, but I expect two giants of the COMPUTER like VMWare and Intel should be able to come on the market with work to off the shelf systems, it's a little disappointing.