failure to update bundle Dell Open manage offline after the ESXi 4.0 upgrade to ESXi 4.1

Similar Questions

• Foglight and Dell Open Manager Application to monitor temperatures

  I would like to know how I would be able to use Foglight to monitor Dell servers.

  For example I'd like to monitor the temperature. These servers have Dell Open Manager installed on then. Can use/get Foglight all alerts to Dell Open manager?

  You can use the SNMP integration to monitor traps HW via Foglight.  Check out this post for a primer http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx

• Dell Open Manage - application compatibility

  Hello

  First post here. I work for a large company and I am the 'rookie' of the service infrastructure. The company I represent have about 500 sites which about 85% have installed Dell Power Edge 310 servers. We seek to deploy Dell Open manage through the estate to monitor the performance of the server etc etc. I had to know if we could use it on other server brands, such as Fujitsu, HP and IBM.  In our data center, we use HP servers.

  So my question is could we use Dell manage open on other servers from manufacturers? And we could use it with the ILO? I know other programs of management software for the likes of HP etc etc, but as you can see I am, to say the least, a bit out of my depth.

  Any help/advice/guidance would be greatly appreciated.

  Thanks in advance.

  No, OMSA works on Dell supported running OS servers.  In other words, that it will work on:

  • non-Dell servers
  • If other computers (including Dell)
  • Servers not made Dell supported operating systems (client OS (XP, V, 7, 8), including the lack of Service Packs)

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• Cannot open 'manage offline files '.

  I'm creating on Windows 7 Home Premium offline files.
  When I press on "set up new sync partnerships, says"there are no new sync partnerships that can be installed on this computer", when I press 'Manage offline files', via aid or through the Sync Center, nothing happens, it will not be open...".
  I was working with offline files before without problem on several versions of windows 7 beta.

  any ideas?

  I'm sorry, but Windows 7 Home Premium isn't the offline files feature.    This requires Windows 7 Professional or ultimate edition.  There was the beta version of Windows 7 ultimate. Steve Winograd, most Microsoft Valuable Professional (desktop experience)

• VMA 5.0 install Dell open manage

  Hi all

  I try to install OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip on my ESX with vSphere Management Assistant, and I have the following error:

  VI-admin@localhost:~ > esxcli - Server ESX_IP software install d OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02 vib.
  Enter the user name: root
  Enter the password:
  [MetadataDownloadError]
  Unable to download zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml deposit, skippi index.xml /var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip: [Errno 2] no such file or directory: '
  URL = zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml
  Please see the log file for more details.

  can someone help me?

  Thank you.

  Try following the steps below.

  1. log in at the VMAs with privileges and the administrator rights.
  2. copy the file OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip in the folder/var/log/vmware on the server ESXi5.0.
  3. turn off all comments on the ESXi host operating systems and run the ESXi host in maintenance mode.
  4. in vMA, run the following command:
  esxcli - Server software vib install d/var/log/vmware /
  5. type the username root and the password of the ESXi host when you are prompted. The output of the command shows a successful update.
  6. restart the ESXi host system.

  Ref (http://support.dell.com/support/edocs/software/svradmin/65_02/ESXi_ts/esxi5_ts.pdf)

• Firefox will not open at all, after the last update (13.08.2015).

  After the update (40.0.2 @ 13.08.2015) just used Firefox open. The process is visible in the Task Manager, but does nothing. no window. JUST. NOTHING. It works only in safe mode or when ran as administrator. I tried other computers from home too. Same thing.

  How to fix?

  Try a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Open Office works after the recent update

  Open office

  I use Open office, but after a recent update it doesn't seem to work... Any suggestion that could help me solve the problem...

  The latest version of OpenOffice is 3.3.0. If your own copy is out of date, maybe it's time to get the latest version.

  Other concerns can be better directed to the OpenOffice community in their area of support here.

• 8 place of Dell does not start after the update failed

  I had started my new Dell place 8 (with Android 4.2) for the first time, and it works pretty well. I was about to install some applications when I noticed "System update," tap to install. I did and it downloaded, rebooted and started to install with nothing do not appear to be wrong. I waited patiently to settle, and all at the end of the installation, he stopped and displays an error message - which amounted to a bot Android in a pose 'broke, closed, stwaming' and the message 'error '.

  And it has been frozen.

  I held down the power button to turn off and then repressed it see the logo of dell for a fraction of a second, and then a USB symbol for a fraction of a second, then it stops. This happens whenever I start.

  I tried to use Droidboot to reset the installation. I can get this to work, but after that I selected recovery it restarts and after the Dell logo gives me the error message 'pic of the Android dead' with the message "No command." This is an another freeze screen, I can't go further without having to reboot.

  What I want is this thing start, I don't like what version of Android, it runs at that time. Assistance to get the thing to start would be greatly appreciated. I won told the thing in a contest, I don't want to be the proud recipient of a brick.

  In this regard, it turns out that you don't have any loose! I discovered this by risking that it and it worked! I didn't not lose something unique on my tablet.

  Step 1 power off.

  Step 2: Press and hold the Power + flight to access Droidboot.

  Step 3: Choose Reboot or recovery (I chose the recovery! "I would say that recovery is the best option!)

  Step 4: When greeted by Dead Android, room hold press flight - up twice and a mini menu appears.

  Step 5: Select Restart now. In a few minutes, your device needs to be restored and booted up ready to go! Enjoy your Tablet without worry!

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• Updated to Photoshop CC 2014 - just after the launch remains on the wheel that turns long before that it can be used

  I have just updated to the CC Photoshop 2014 on my MacBook Pro retina and just after it starts, it is just on the spinning wheel for about 3-4 minutes until finally, Photoshop can be used.

  It's never happened before in the CC version that was usable immediately after the launch.

  Any ideas what is the cause? I tried to disable all plugins and presets, etc. anything.

  Hi Daskennich,

  I had a different problem with first CC 2014, I managed to get solved with the help of someone on the Forum first.

  The great thing is that the solution also fixed this problem of Photoshop as well!

  So here it is:

  From: wrpcWill

  I found a solution that worked for me. Seems to be a permissions issue. Here is the solution I found (found here: CC 2014 startup problems: Adobe Premiere Pro):

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

  I hope this helps!

• Problems to open PDF files after the upgrade of the file server for 2012 R2

  Hello

  This weekend we have improved our main Windows 2003 to 2012 R2 file server.

  Since the upgrade, users (including myself) cannot open a PDF of the file server.  If I double click on a PDF file, it opens as usual, but if I double click a different PDF, the acrobat reader flashes (in the Task Manager I can see another instance AcroRd32.exe starts and stops) but the second document does not open.

  If I close the first document and then try and open the other, and then it opens without any problem.

  This only affected the opening of files on the new file server, opening several files on a local disk is very good.

  If I disable 'enable protected mode at startup' then I can open several documents of the file server.  I would prefer not to have to do.

  Users are using Acrobat Reader 11.0.10 on 64-bit Windows 7 and Windows 2008 R2 Remote Desktop.

  Does anyone have any ideas, it may be the cause?  And does anyone have one solution other than to disable the protected mode?

  Thank you

  Joe

  Hello

  Try the latest Adobe Acrobat Reader DC and check if the problem still exists or goes.

  It can be downloaded from Adobe Acrobat Reader DC install for all versions

  Thank you

  Shakti K

• Computer asks me to open a session after the connection

  I just upgraded to El Capitan and noticed the other day, and even today when I realized my computer was dead and plugged when I tried to put it on it gave me a login screen with a tick next to my name and then next to it was the display of the guest and she asked me to open a session , after I login I lost control of my mouse and the screen goes black and then it goes to my regular login screen is just my user ID asking me to log in a second time. I was confused by it and I changed my password, but now he asked me once again just a few minutes ago to do the same thing. Is this normal? I know I was hacked just recently by a person who has put something in the mainframe UNIX to my computer and the people of the APPLESTORE wiped my drive and had to rebuild my computer but since then with the new passwords and everything is this something new number I need to worry or is this a new normal occurrence due to El Capitan?

  If your Mac keeps asking for the password to keychain - Apple Support

• Firefox does not open a link after the first; Open ok in new tab front.

  In the last week or two, for reasons not clear to me, Firefox does not open the new links after the first; It is used to open a new connection in new tabs (according to my preference) without problems in the past. Now it does not blink again.

  Over time, I've added new applications and others removed, and, of course, I can't exclude from their role in the problem that I have now. I would appreciate some help to solve this problem.

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...