Upgrade to Mac OS Lion and the Photosmart Plus B209a

Similar Questions

• Mountain lion and the Photosmart C4780

  In short, I'm not able to put my printer as my default printer used because the driver software could not be found!

  I got the impression of almost 2.5 years, I was never able to print wireless as he made just it's self, now that I don't have wireless as it is that I expect that print would be at least a tad easier!

  This isn't.

  I reinstalled the software for the website of HP C4700 series, I rebooted both laptop computer and printer and yet when I try to add the printer to the printer list, currently there 2, work and my parents have. but mine, the only one connected, the only one I don't have the official software installed at the moment run and do what I need it to do!

  When in system preferences I click the Add button and then enter to add using the software he knows exists, but then when it tries to download and install it does not find the software, then offers space! with no further explanation.

  What I can do, I have to print RESUMES and my University Master's project! NOW!

  Try resetting the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more and try to add the printer again.

  If the same repair disk permissions as follows, then install the package from Apple again and try to add the printer again:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Hope that helps,

  Shlomi

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?

• After upgrading to MAC Mountain Lion, the drivers for my HP C4680 were removed (accidentlly)

  After upgrading to MAC Mountain Lion, the drivers for my HP C4680 have been deleted (accidentally). I downloaded the drivers from HP, but my Macbook it not install because the drivers are not available on Mac Store. How can I get the printer installed?

  Hello

  First of all, make sure you restart your Mac, and then try to add the printer again.

  If it persists, ensure that the USB port directly connected to your Mac and not via a USB hub or extention.

  Ensure that the USB is not longer than 2 m and check to see if that can help you.

  Also, if you have an iMac, be sure to plug the USB in the port at the back of the Mac and not in the Apple keyboard, which is not powered.

  Also, try to reset the printing system, then try to add the printer and check any changes:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and try to re-adding the printer.

  If none of the steps above does not lead to any progress, go to the library and place the HP folder to the trash.

  Enter PPD\Contents\Resources, search for C4600 and move the files to the trash, then try to add the printer again.

  Hope that helps,

  Shlomi

• I updated my operating system Mac Mountain Lion and my CS2 no longer works. Is there a solution?

  I updated my operating system Mac Mountain Lion and my CS2 no longer works. Is there a solution? CS2 works great for my purpose.

  Unfortunately it is the control of Adobe on the outside. Recent versions of Mac OS x simply do not contain the necessary components to the system more. Short of signing up for creative cloud / purchase CS6, there is no way to fix it, though, if "CS2 works just fine" for you, PS Elements could suffice just as well these days, given that all of the features is similar to your old version of PS...

  Mylenium

• Can I use the same creative cloud for photographers on mac at home and the pc at work?

  I want to know if it is OK to use Phototoshop and lightroom on mac at home and the pc at work

  Hi Vicky,

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

  
  

  Go to Adobe Creative Cloud
  

• HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

  I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the PC is shut down, the printer goes offline. I have to restart the installation time and time again to bring wireless online. I added the MAC address of the Belkin router and I have the camera had confidence in my Norton Firewall. I keep seeing "HP Network Support Automatic (delayed start)" in services, but by changing it seems to make a difference, I still need to run the installation once after the system is shut down. I see also two printer icons in devices and printers. We're just the Photosmart printer with a generic printer icon; and the second is Photosmart printer, Scanner, copier with a picture of the Photosmart which I believe it should be. I ran the installation at least 10 times and I get a good wireless system work then after that the machine is stopped for the day the printer is offline and do not print. How can I stop the printer goes offline in wireless mode?

  I solved the problem.

  I put the IP address to the MAC address of printers in the router.

  I put the printer to TRUST in the network settings on Norton Security Suite.

  The printer works wirelessly all the time now.

• HP Photosmart Plus b209a-m: prevent the attempt to auto-install on reboot

  Whenever I start my Lenovo Win7 PC, the HP Photosmart Plus b209a-m trying to install automatically (even if not connected by USB on my computer).

  This unwanted installation works ever ("fatal error during installation") with the message "-error" "wStub" "66814.

  When I click 'OK', hold the popup "remove software" then 'analysis of installation error logs' begins and clicking on 'Cancel' doesn't help not (results in 'continue' or 'Retry').

  I don't want to use HP Photosmart Plus b209a-m, so how can I prevent automatic installation does not happen?

  Thank you.

  Hey there @LB84105

  Thanks for posting on the HP Forums.

  I want to help! I see that your computer keeps trying to install the printer software.  I recommend you to go to "Add or remove programs" and making sure that all the printer software are uninstalled. When it is finished, run the "Disk Cleanup" and mark all the boxes to remove the folder temp and other junk. Restart the computer and let me know if the message stops.

  Thank you!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
  Have a nice day

• Why did TMP_00 attached to my name of the printer, Photosmart Plus B209a-m

  I had to reinstall my network from my HP Pavilion DV6 laptop, an HP Photosmart Plus B209a-m and a router D-links.

  Since I did it, the laptop is fine, but I was unable to get the printer works wirelessly.  I spent hours chatting with HP printer location, but they have not yet set.  I was told that I had to uninstall my USB and let him resettle.  I saw on an attempt there is a shift of the IP address to reinstall.

  It seems to me that either uninstall and install does not completely remove/replace all necessary files because I saw things like TMP_00 and Copy_1 attached to the end of my name of the printer also, when I looked "Protected from the network connections for the domain profile", he mentions 3 connections.

  Wireless Connection2

  Wireless network connection

  Connection to the local network

  I need to delete all files after uninstall, so that my printer name is not a TMP_00 or copy2 attached to it when I reinstall?  Is it important that the names are extended or if multipul connections listed there?

  Thank you for your response.  It seems the best answer I got, here or through conversations, HP Solution Center, original install disc, etc.  I saved it in case I have problems in the future.

  My printer seems to work fine now, even wireless scan.  I looked in the start menu and click the HP folder, inside was my printer.  I clicked on that and chose the option to change to wireless USB.  I went into the menu and in the end I pulled out the USB cable and everything seemed to work.  The screens were all as the orig. install screens and he acted as if it was a new printer with options to save my new product HP and the HP etc shop offers.

  After hours I spent on it, the solution was still within my reach.  Not sure I should give congratulations, because I'm not going to try your solution.

  Thanks anyway.  Mark Brorson

• HP Photosmart Plus B209a-m stopped working with a Macbook, still works with others

  We had this printer wireless printing of 2 Macbooks a running OS X 10.8.2 and another OS x 10.6.8 without any problem for some time when it suddenly stopped working with the old Macbook running 10.6.8.

  When we tried to print anything in that nothing happened, when we open the print queue, there's an exclamation point to the left of the print job and to say an error message something about the levels ink (ink levels were very well as it print to the other Macbook without problem).  We tried the buttons pausing and resuming.  I can't provide exact errors that we had because now that we have tried to reinstall the drivers we get a new series of errors.

  We redownloaded the drivers for OS X 10.6 on HP website and tried to go through the HP setup assistant.  When we arrive at step 'Select printer' and he takes us into the preferences system to add a printer - our printer shows up, but when selected, we get the following error message: some of the software of the printer is missing.  You may not be able to print to "HP Photosmart Plus B209a-m" Please reinstall the printer. software - and of course, we are not able to print.

  We uninstalled and reinstalled the drivers several times without any effect.  The only way that we were able to print off the computer is if printer sharing is enabled on the other Macbook (with OS X 10.8.2).)  Then, it presents itself as a separate printer and can be used by the old Macbook only if the other is on.  This isn't how it was put in place when we had the two work before.

  Any advice would be appreciated.

  Margorie

  What router are you using?  I guess that the 10.8 machine can print correctly?

  Let's start with that on the 10.6 machine: download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• MacBookPro does not get with Photosmart Plus B209a

  Constantly, I fight with this printer for simply doing his job.  Printing is still queued, scanning only from the computer itself using the system preferences and getting the printer to share wireless just is not doable.  I'm on Mac OSX Lion, and I wonder if this isn't part of the problem.   The latest updates from HP do not deal with Lion.  The printer worked well enough wireless using Snow Leopard.  Any help appreciated.

  -Mark

  Try this: http://support.apple.com/kb/DL907

• HP photosmart plus b209a-metres driver install fails

  Hello

  I can't install a driver of hp photosmart plus b209a-metres. The cd and the downloaded version does not reach

  in the middle of the installation in the "application of updates. No error message it simply disappears.

  Stop anti viruses, nothing helps.

  Tried on a 2150us Pavilion dv6 and dv7 1260us windows 7 64 with the same results.

  He settled in "windows 7" (?) compatibility mode, but only a wired connection can be established.

  Installed on a new Mac, no wireless connection either.

  The printer seems to recognize networks wireless in the neighbourhood according to its printed diagnostic network

  but not through the dialog box to install.

  It is an older model (sitting in its box until the death of our other printers), the driver is old, but still 2 years ago

  could have been a good home network printer

  Any advice would be greatly appreciated

  Thank you

  Hi MDG21,

  Follow the steps described in the document on the link below to connect the printer to your network and follow the remaining to uninstall and reinstall the printer. Let me know what you find?

  Installation of the software of the printer on a wireless network

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-71739-3&cc=US&DLC=en&LC=en&os=4063&Product=3777182&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Photosmart Plus B209a-m installation CD is not compatible with Windows 8.1?

  For the ninth time now, after that some updates from HP that I'm no longer able to use the scan function on the HP Photosmart Plus B209a-m all-in-One printer I've owned for more than two years now.  I tried all the things suggested the HP Support Assistant, including the feature troubleshooting and restarting.  So I took the next step in uninstalling the printer and put it back, eventually.  Or try to reinstall, it is.

  I had a Windows 7 HP laptop when I bought the printer, but now I have a newer HP laptop who initially missed out on Windows 8, but has recently been upgraded (?) to 8.1 Windows.  I was able to install the printer, after that I'm the new laptop under Windows 8.  But when I put the CD is no longer allows me now to proceed with the installation.  Of initial pop-up box tells me to click on 'Install', but the only available choice is "quit".  In addition, it has a red square with a white 'X' in the upper right corner of the popup box.  I have never seen that in any of the previous eight times I had to re - install the printer.

  So now what should I do?

  Terry Sullivan

  The original CD was manufactured before Windows 8 or 8.1 have been released, I would suggest downloading the recommended full 8.1 HP here windows driver.

• Our HP Photosmart Plus b209a-m this that it is not connected after a change of modem.

  Lightning struck the power line outside our House. We had to replace the modem. Now our HP Photosmart Plus b209a-m shows that it is not connected. Connect us wirelessly. What should I do to get this operational return.

  Go to Applications > Hewlett-Packard > [your printer model] > setting up the printer and software.  Run it to re - connect your printer to your wireless network.  Need you a USB cable temporarily.  Connect it only when the software asks you.

• Unable to uninstall HP Photosmart Plus B209a-m.

  I can't uninstall my printers software. I double click on the software of printer dirver. Then, I select "uninstall." Then, I select "uninstall all HP products associated with this device. The software then comes back and tells me that "what will be removed" HP Photosmart Plus B209a-m ". I then "select continue ' and he comes back and tells me that"you must restart your computer to complete the uninstall,

  "Please save all your work and then click on finish, uninstall will end after restarting your computer.

  I then click on 'next' and it restarts my laptop BUT after restarting, nothing happens. If I go through the process again the same thing happens. According to me, there is a file or which prevents the process happening. Any help would be great.

  My laptop is a laptop CTO Pavilion dv7t-7000.  And of course the printe is a HP - Photosmart B209a more

  Hello @Harlydude , welcome to the forums

  I read your post about the problems you are having with your Photosmart Plus B209a uninstalling model. May deepest uninstall, try the following steps.

  1. Click Start, type %temp% , enforcement, and click OK.
  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one 7z folder, try the newest one).
  3. open the util folder.
  4 open the CCC folder.
  5. run the Uninstall_L3.bat for a HP PC.
  6. once the uninstall is complete, restart the computer.

  The software should be removed now.

  Let me know how it goes for you!