Upgrade to vCenter 5.0 to 5.1 fails with the error

Similar Questions

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?

  I was downloading the upgrade to Adobe Bridge. It failed with the error 49. What now?

  Mcarlclapp the error States just error 49 or does a download error as well?  Also, what operating system are you using?  Finally, you are on a managed network?

• in vCenter 6.0 'Run Stimulus Plan' failed with the following error.

  Hello

  I am new to this forum and sorry for the mistakes

  I have two site, a vcenter-hq (HQ) and another vcenter-dr (disaster).

  I use SRM, almost everything works fine except one thing.

  When I try the vcenter-TA to execute the recovery plan I get error (recovery rest also works very well):

  'Run stimulus plan' failed with the following error message.

  faultCode:Server.Processing faultString:'

  An error has occurred during serialization server response (s).' faultDetail: 'null '.

  However, vcenter-Dominican Republic to vcenter-hq it works fine

  (See pictures attached)

  

  

  

  

  

  reinstalling the recovery helped Sire Manager!

• Windows 10 upgrade fails with the error C1900101-20006

  The current operating system is Windows 7 SP1.

  First test was about 6 months ago.

  At that time googling the error has not returned any hits at all.

  Hoping that the problem would resolve itself, or a kind of diagnostic information would become available I tried again today, but with the same result.

  I tried things like run the update utility and uninstall the virus check tool, but all the tests gave the same result.

  Is it possible that I can get more information about what is really causing the error, for example which driver is causing the problem?

  An additional piece of info is the error of update: is 0x80070005, which seems to be "access denied."

  The upgrade is already running as an administrator, and I run the SubInACL tool.

  Consider the following text:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• upgrade from 5.1 to 6.0 vCenter fails with the error

  Hello together!

  We wanted to do an upgrade of vCenterServer 5.1 to 6.0.

  But we get an error after that I have to enter the vCenter Server credentials.

  It is the following error message:

  Error: IP address: xxx.xxx.xxx.xxx is present in the certificate subject names alt but under DNS key.

  This ip address cannot be used for installation.

  Resolution: use a dns name or ip address that is present in the subject of certificate alt names or regenerate the ssl certificate for the SSO before continuing.

  I don't know what to do.

  I think that Yes, that's what he meant.

  Quick question: have you checked with HCL before the upgrade?

  VMware Compatibility Guide: System search

• LM 4.0.1 upgrade fails with the error DB

  I'm doing the 4.0.1 update tonight and ran into this error during installation. On the second attempt of the installation, it works but none of my data is preserved.

  

  Any suggestions?

  Thank you

  Blake

  4.0.1 lab Manager was a Mare of the night for me. I had the same exact SQL error:

  +1: -2147217900 2: [Microsoft][ODBC SQL Server Driver][SQL Server]Violation
  of PRIMARY KEY constraint 'RoleRight_PK'. Cannot insert duplicate key in object
  'dbo.RoleRight'+
  

  My VMware support ticket is: 1496998701. The fix for this support of VMware has been:

  (1) log on Lab Manager 4.0.0 and access rights and roles

  (2) for the role of the user, disable the right "Library Configuration: Clone of Workspace", then save the role.

  (3) for the view only role, uncheck the right ' Machine: use Console ", then save the role

  (4) you should now be able to upgrade Lab Manager 4.0.1 without received SQL error previously.

  After that they provided a fix for this, Lab Manager is unable to connect to vCenter with a time-out error. Did someone else to have a timeout like this error after a Lab Manager 4.0 to the 4.0.1 upgrade?

• VMware Tools upgrade fails with the error

  12 Pro - 12.1.0 workstation build-3272444

  Individual license

  Guest operating system: Ubuntu 14.10 64-bit

  VMware Tools: 9.6.2.31837 (build 1688356)

  Virtual MACHINE works fine except...

  Updated the VMware Tools, download stage publishes a message and is abandoned:
  Error: There was a problem updating a software component.   Try again later and if the problem persists, contact your system administrator or the VMware support.

  I can't find useful this question online resolution.  Perhaps this community can help find a solution?

  Furthermore, I also have a VM for 64-bit Ubuntu 15.10 who works with success the VMware Tools 10.0.1.357 (build 3160059).

  I need to run both versions of Ubuntu for software compatibility.

  Maybe you can try to get the packages of the latest VMTools from their repo upgrade server: filing of CDS - /var/www/public/stage/session-59/cds/vmw-desktop/ws/12.1.0/3272444/windows/packages

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• Pavilion dm4: Windows 10 upgrade fails with the message error "we couldn't update the system reserved partition."

  Both HP and Microsoft indicate my laptop was ready for the upgrade to Windows 10, but when I tried to do the upgrade there not - several times - with the error message of Microsoft that "we could not update the system reserved partition."

  What should do?

  Other threads of error indicate the system reserved partition must be larger.  This partition is usually small.  Try making at least 400 MB instead of the 100 MB to 250 MB it is probably now.

• Load Balancing configuration failed with the failure of the connection shared after 11.1.2.2 11.1.2.3 upgrade

  Hello

  We have our EMP system had put 11.1.2.2 to 11.1.2.3 and it's a broadcast environment (Windows 2008 Server) and in one of the server, we installed FDM and after 11.1.2.2 upgrade to 11.1.2.3.

  When we load balance FDM Configuration, SSP is failed with " Shared Services Connection Failed '

  What I did:

  Deleted all entries in the object load balancing DCOM {E652643D...} and the Application Server Config {26AD6592..} and the COMJNIBridge DCOM objects. Re-directed EMP config for FDM application server

  and reconfigured the FDM with mycmsc\svc_hyperionfdm of the user application server. Config of load balancing is still unable to the connection of Shared Services with the error "Shared Services cannot connect".

  I tried the local administrator user but fails in the same way

  Windows system log entries:

  The application-specific permission settings do not grant Local Activation permission for the COM with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} server application and the APPID

  {E652643D-6CC1-48AC-915D-01842B04F292} the user NT AUTHORITY\SYSTEM SID (S-1-5-1 of the address LocalHost (using LRPC).

  This security permission can be modified using the Component Services administrative tool.

  Windows Application log entries:

  Recovery of the class factory COM for component with CLSID {E652643D-6CC1-48AC-915D-01842B04F292} failed due to the following error: 80070005.

  COMJNIBridegWrapper.log entries

  08/07/2014 10:42:06: unknown COMException error

  at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall (Object o, Type objType, String name, Object [] args, paramnames, CopyBack [] Boolean String, Boolean IgnoreReturn) at

  Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall (Object Instance, Type, Type, String MemberName, Object [] Arguments, String [] ArgumentNames, TypeArguments, Boolean] [] Type

  CopyBack, Boolean IgnoreReturn) at Hyperion.Fdm.Api.Common.Security.Authentication.AuthenticateUser (String userName, String password, the domain, String String & ssoToken)

  Hello

  Finally, we could solve this problem. Thank you for all your help.

  Kind regards

  VJ

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Upgrade to LR5.7 and PS Elements 13.  With the help of an SSD that is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Upgrade to LR5.7 and PS Elements 13.  With the help of a Solid State Drive, which is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Yes, there is no need to keep older versions of the software on the SSD (or your computer).

  In addition, you mentioned but if the photos are on the SSD, you must move them off the SSD for a typical hard drive, by following these instructions: Adobe Lightroom - find folders and files moved or missing