Upgrade VDP 5.5 to 5.8-> problem of component software plug-in

Similar Questions

• Problem with component software plug-in controlfile to 12 new c catalogue

  Hi all

  We have recently migrated our database 10g and 11g leave a catalog of 11g to a catalog of 12 c and began to receive the following error message:

  RMAN-06207: WARNING: 1 objects cannot be deleted for DISC due channels

  RMAN-06208: status do not match.  Use the OVERLAP command to set status

  RMAN-06210: list of relevant objects

  RMAN-06211: =.

  RMAN-06212: filename/Type object Handle

  RMAN-06213: --------------- ---------------------------------------------------

  RMAN-06214: copy of the data /net/oramon01/rmanpool/active/HOUTRN/bkcontrolfiles/HOUTRN_snapcontfile.scf file

  A manual cross-checking of the file within rman and then an outdated deletion removes this error OK.

  However when I try to paste the overlap in my script I begin to receive the below error:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of command of overlap to the 29/10/2014 11:40:49

  RMAN-06004: error ORACLE recovery catalog database: RMAN-20220: copy of file not found in the repository of control

  RMAN-06090: error while looking upward to control file copy: /net/oramon01/rmanpool/active/HOUTRN/bkcontrolfiles/HOUTRN_snapcontfile.scf

  The file exists on the server at this location, but he's not being re-cataloged.

  It is a feature that is no longer there in 12 c as this has never been a problem when using 11g catalogs?

  Thank you

  Once the problem has disappeared, you shouldn't need to put in your script.

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• There was a problem downloading the software for the iPhone error - 39

  My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

  There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

  Make sure that your network settings are correct and your network connection is active. or try again later.

  Hi mgdabko!

  I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

  If you see an error when you update or restore your iPhone, iPad, or iPod

  Thank you for using communities of Apple Support.

  See you soon!

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• There was a problem downloading the software for the iPhone. The network connection timed out.

  Original title:
  Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network
  -----

  My computer can not down load the version the most recent for my I Phone it says:

  There was a problem downloading the software for the iPhone. The network connection timed out.

  Make sure your network settings are correct and your connection is active network, or try again later.
  IM Online hole time and ive tried for months

  Hello

  ·         What software you want to download?

  ·         You have an earlier version of the software installed on your computer?

  Method 1:

  Try to download the software by disabling add-ons: http://windows.microsoft.com/en-us/Windows-vista/How-do-browser-add-ons-affect-my-computer

  Method2:

  Try disabling the anti-virus and then check if you can download the program.

  NOTE: make sure that you enable the antivirus protection as soon as the diagnosis is completed.

  Method3:

  Reset Internet Explorer, and then try to download the file: http://windows.microsoft.com/en-US/windows-vista/Reset-Internet-Explorer-7-settings

  NOTE: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  You can also post your questions on the apple forum by clicking this link: https://discussions.apple.com/community/iphone/using_iphone

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Problem of component snap hinge

  I just stumbled upon the problem of component snap hinge right that everyone has been, I have a HP ENVY 6-1010TU, I've had my laptop for over a year now and this occurred yesterday, I'm more in Australia, can you help me Jeff?

  Stingo98,

  I sent you a private Message to this topic.

  Kind regards

  Eric g

• Problem with component InputFile

  Hello, I am new to the ADF, and I have problem with component InputFile. I put it on the pop-up dialog box and when I close the popup and open it again the entry file contains the previous file. How can I delete it? There are a few inputFile.resetValue () of the method, but where should I put it?

  Bind the inputfile component and set the value to null close Popup.

  AddFile RichInputFile = this.getAttachmentFile ();

  addFile.setValue (null);

• Hi, I think to upgrade my CS5 to CC. Can I use the software on my desktop and my laptop on a license?

  Hi, I think to upgrade my CS5 to CC. Can I use the software on my desktop and my laptop on a license?

  Yes. It's no different than with perpetual license types.

  Mylenium

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier

• Satellite A110 Upgrade - Xpress 200 M problem, lost Toshiba Software

  I own Toshiba Satellite A110-110. After using this laptop for a period of two years with pre-installed system, CPU and RAM, I decided to update. So, I change Celeron M410 for a Core Duo T2450, 60 GB HDD for a HARD drive of 250 GB and 512 MB of RAM to 2 GB of RAM and Windows XP it for a Vista Enterprise.

  Installation of all parts and software went well. Then, I downloaded and installed the drivers for Vista. So what's the problem you could ask?

  An ATI Xpress 200 M, could get up to 256 MB of graphics RAM on Windows XP, now with Vista, this graphics card in the Panel displays only 128 MB (shared) memory got. Is there any option to change the settings and have the old 256 MB. Maybe someone knows the solution?

  As the second main problem after that the upgrade of my personal system is total lost all Toshiba Utilities like connectivity, Wireless LAN search doctor (transparent oval radar hide on the right side of the screen with other options), Panel of SRS WOW Sound and others who were in Office Setup.

  Vista does not appear all that I put in the system, some of them. If someone can help fix this problem and know where I can get this kind of software would you please give me a tip and write what kind of idea, you are able to share.
  Thanks for any help!
  Alex

  As already suggested Homer shared memory cannot be manually set to a higher value. Everything works automatically and the graphics driver control and assigns the amount of shared memory
  In addition, the shared memory value max depends on available main memory.
  The high value of the main memory, the upper value of the shared memory could be used on laptop computer A110.