Upgrade Windows 10 not install Via Windows Update

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Can not install the kb2481109 update, see log attached

  Can not install the kb2481109 update, see below

  1.328: 11:36:42.796 24/08/2013 (local)
  1.328: c:\161c59ea6306a628592717476ee96b\update\update.exe (version 6.3.13.0)
  1,344: hotfix started with following command line:
  1,344: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
  1515: C:\WINXP\system32\mstscax.dll is present
  1515: condition succeeded to the Presence.RDCInstallBlock.Section section in row 1 prerequisites
  1515: FileVersion C:\WINXP\system32\mstscax.dll is less than 6.0.6001.0
  1515: condition in Test.RDCInstallBlock.Section failed with the fist
  1515: Check condition for line 2 of prerequisite returned FALSE
  1515: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,515: KB2481109 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  1,562: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  1,562: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
  38.890: user input: OK
  38.890: Update.exe extended error code = 0xf0f4
  38.890: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Hi Keith,

  I would have you look at the article-

  http://support.Microsoft.com/kb/958051#top

  http://support.Microsoft.com/kb/883824

  http://support.Microsoft.com/kb/822798#top

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• Do not install the KB2686505 update

  Do not install the KB2686505 update

  Hello

  You receive an error message/code?

  You did changes to the computer before the show?

  As a work-around I suggest you refer to the following method.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

   

  Method 2: Perform a clean boot before proceeding with the update of windows.

  Note: After the boot minimum troubleshooting steps, restore your computer to Normal startup mode.

   

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

   

  Method 4: Let us first start the SFC scan and check if there are any file system corruption. You need windows XP disk to perform the analysis.

  1 put the Windows XP CD in the CD-ROM.
  2. click on 'Quit' if the auto-menu appears.
  3. click on 'Start', then click on 'run '.
  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Note: There is a space between "SFC" and "/ Scannow".

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

  MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

  I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

  I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

  iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

• I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update.

  Silverlight only updated [failed] and I cannot uninstall

  I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update. Any suggestions

  Please repost your request in the Forum Microsoft Silverlight.  Thank you! Carey Frisch

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• Windows Vista drivers not install ALL or update of new pilots

  About two weeks ago, I had a problem with my computer marketing and don't not loading Windows. He gave me the option to start Windows normally or repair of launch Windows. I tried to run normally and windows still only would be not loaded correctly, so the next time the computer is started, I launched the Windows repair instead.

  Later, I tried to save my Blackberry smartphone on my Blackberry Desktop Software program (which has been on my computer since I bought it 01/05/2009. But it does not recognize the hardware. So I plugged back it it and it began to automatically search for the driver (Driver Installation Program). It says install software device driver and he's looking for preconfigured driver folders. Of waiting for the user to input and gives me the choice: 1) locate and install driver software (recommended) (2) Ask me 3 again later.) Do not show this message for this device.  I choose option 1 and it gives a message, DEVICE DRIVER installation of MICROSOFT WINDOWS SOFTWARE and I support on continue. It gives the message: SEARCHING WINDOWS UPDATE, WINDOWS UPDATE DOWNLOADING, INSTALLING the DRIVER SOFTWARE. Then a message saying: Windows encountered a problem installing the software driver for your device. Windows found driver software for your device, but it has encountered an error trying to install it. He also says: the process cannot access the file because it is being used by another process.

  Now, I didn't know what was wrong, so I tried to ask for help with material assistance and Paretologic PC Health Advisor and they are quite a few outdated drivers and asked if I wanted that they find new updated drivers, I agree.  And he again... the SAME EXACT PROCESS I HAVE INDICATED above. It will not install the drivers again and it will not install updates for all drivers more.

  So now when I go into the DEVICE MANAGER there are several yellow exclamation points next to the items (I've NEVER seen before). I can't update these drivers:

  1.) NVIDIA nForce 5/6/7 set of pilots in series, which includes NVIDIA nForce PCI System Management and NVIDIA nForce System Management Controller

  2. display drivers) laptop NVIDIA including NVIDIA GeForce 8200 M G

  3.) Atheros AR5007 802. 11 b/g WiFi adapt

  Realtek USB 2.0 card reader 4)

  Also, in OTHER DEVICES under Device Manager, there are unknown devices that have yellow exclamation points by them as well. Apparently I'm missing these devices now, and I have right clicked on it and select Update driver software. RESEARCH then AUTOMATICALLY update DRIVER SOFTWARE. She is looking for some time, and he said ENCOUNTERS A PROBLEM INSTALL THE DRIVER for YOUR WINDOWS DEVICE

  HP DRIVER MIRROR RC

  The system cannot find the specified file.

  (This was NEVER a problem before)

  Now, whenever I turn on my computer, it does an automatic search of an unknown device.

  Here are all THE drivers I've tried to update via WINDOWS UPDATE INSTALLATION. I tried to install them manually, by going to my DEVICE MANAGER and still nothing.

  About two weeks ago, I had a problem with my computer marketing and don't not loading Windows. He gave me the option to start Windows normally or repair of launch Windows. I tried to run normally and windows still only would be not loaded correctly, so the next time the computer is started, I launched the Windows repair instead.

  Later, I tried to save my Blackberry smartphone on my Blackberry Desktop Software program (which has been on my computer since I bought it 01/05/2009. But it does not recognize the hardware. So I plugged back it it and it began to automatically search for the driver (Driver Installation Program). It says install software device driver and he's looking for preconfigured driver folders. Of waiting for the user to input and gives me the choice: 1) locate and install driver software (recommended) (2) Ask me 3 again later.) Do not show this message for this device. I choose option 1 and it gives a message, DEVICE DRIVER installation of MICROSOFT WINDOWS SOFTWARE and I support on continue. It gives the message: SEARCHING WINDOWS UPDATE, WINDOWS UPDATE DOWNLOADING, INSTALLING the DRIVER SOFTWARE. Then a message saying: Windows encountered a problem installing the software driver for your device. Windows found driver software for your device, but it has encountered an error trying to install it. He also says: the process cannot access the file because it is being used by another process.

  Now, I didn't know what was wrong, so I tried to ask for help with material assistance and Paretologic PC Health Advisor and they are quite a few outdated drivers and asked if I wanted that they find new updated drivers, I agree.  And he again... the SAME EXACT PROCESS I HAVE INDICATED above. It will not install the drivers again and it will not install updates for all drivers more.

  So now when I go into the DEVICE MANAGER there are several yellow exclamation points next to the items (I've NEVER seen before). I can't update these drivers:

  1.) NVIDIA nForce 5/6/7 set of pilots in series, which includes NVIDIA nForce PCI System Management and NVIDIA nForce System Management Controller

  2. display drivers) laptop NVIDIA including NVIDIA GeForce 8200 M G

  3.) Atheros AR5007 802. 11 b/g WiFi adapt

  Realtek USB 2.0 card reader 4)

  Also, in OTHER DEVICES under Device Manager, there are unknown devices that have yellow exclamation points by them as well. Apparently I'm missing these devices now, and I have right clicked on it and select Update driver software. RESEARCH then AUTOMATICALLY update DRIVER SOFTWARE. She is looking for some time, and he said ENCOUNTERS A PROBLEM INSTALL THE DRIVER for YOUR WINDOWS DEVICE

  HP DRIVER MIRROR RC

  The system cannot find the specified file.

  (This was NEVER a problem before)

  Now, whenever I turn on my computer, it does an automatic search of an unknown device.

  Here are all THE drivers I've tried to update via WINDOWS UPDATE INSTALLATION. I tried to install them manually, by going to my DEVICE MANAGER and still nothing.

  Hey Renee27j

  you are looking for and install 3rd party hardware dirvers from the site of hardware manufacturers not through windows update

  Walter, the time zone traveller

• My windows xp home will not install IE8, SP3, updates, backup NT FixIt it or format partition. It is part of a home network.

  The computer has XP Home. It is an older machine, 266 Celeron, 2 GB of Ram that I built a few years ago. It is part of a home network. It has not been updated for a while so I decided to install SP3, updates, IE 8, BackupNT off CD, FixIT and Partition & Format 2 more large players. It wouldn't install them or partition or format the disks again.  It is clear that I have no idea.  Mike

  Hello

  What is your level of service current pack? Click right my computer, click Properties, on the general tab, he says.

  If this isn't SP1A or SP2 you will not be able to install SP3. You will first need to install SP2.

  How you try to install the SP3? Stand-alone package or Windows Update?

  I must say that I'm not sure why you are unable to install, for example, NTBackup. As said by Harish B N, we need more information about the error you get.

  Tricky

• Can not install a security update Cumulative for Internet Explorer 8 for Windows Vista (KB978207)

  I tried to download this update for over a month, but every time I try it fails. I get this error code:

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB978207)

  Installation status: failed

  Error details: Code C 8007371

  Update type: Important.

  Can someone please help me I would be very happy! Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Upgrade Advisor does not install

  Hi I posted this on the Vista forum. I got 1 response suggesting I have try to download it again, as I did with the same result. The 2nd answer said not to post this question on the forum of Vista. If she is here now on this forum.

  I downloaded the UpgradeAdvisor a Windows 7 at the same time a running Windows Vista my PC Edition Home Premium and the other Windows XP. It will not install on each PC. I double click on the downloaded file and am asked in Vista to continue, I click "Yes" and then nothing happens. There is no sign of any program running or running any process that did not work until I tried to install the Advisor. Please can someone help. (I tried to disable the system security McAfee but that did not help).

  Well thank you for the suggestion of Steve of Microsoft Developer Network. I tried to download another copy to another location. Unfortunately exactly the same result. Yesterday I download about 5 times in different places, none worked, but I thought I'd try again today - same result. Am I the only person having this problem?

  I followed the advice on another thread closely linked to it. Someone (non-Microsoft) advised using a program called "Winrar" to unzip the file to the millisecond. You can download free Winrar (shareware). I tried and it works very well. It unpacks the MS then called "self-extracting" file downloaded from MS site above and shows you the content. I selected the provedure of installation for the Upgrade Advisor for 32 bits, and low and you installed the Upgrade Advisor on my machine.

  I ran with success of the counselor and am at a complete loss to understand why Microsoft technicians could not have told me in this simple direction rather than give me useless and very lengthy procedures which did not work.

  The adviser tells me that I can upgrade to Windows 7 Home Premium or WIndows 7 MegaSuperCostULoads (or whatever its name). I'm not sure I want now, or if I trust Microsoft more. Maybe I'll switch to Ubuntu.

  Nick

• Windows Update will not install 9 latest updates recommended, need help!

  I tried to install:

  KB980182
  KB977816
  KB978338
  KB979683
  KB980232
  KB981332
  KB905866
  KB976264
  KB980248

  pls help

  Hello

   

  
  a. don't you encounter any error message when you try to install or download updates?

   

  You can view the history of update to find errors.

  Let us make the below listed methods one by one and check if you are able to install these updates successfully.

  
  Method 1.
  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

   

  For steps about how to run this utility, refer to the article below.
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2.

  Try also download and install these updates manually and check. Visit the Web site below and look for the number of update and choose the right operating system for the update and try to download and install.

  http://www.Microsoft.com/downloads/en/default.aspx

  
  Method 3.
  I would ask you to reset the Windows Update components and check if you still get this error message.
  Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  
  Method 4.
  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Method 5.

  I ask you to download the journal of cbs on the skydrive.

  Navigate to the following location on your computer C:\Windows\Logs\CBS\CBS.log Can and upload your log to your public folder the SkyDrive for analysis.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not install the important updates for Microsoft Office ona HP laptop running Windows Vista Home Premium Service Pack 2

  Hello I am running Windows Vista Home on my laptop.  I have windows update set to download and install updates as they come.  I can't get my computer to update update of security for Microsoft Office Excel 2007 (KB973593)
  Update of security for Microsoft Office 2007 System (KB973704)
  or
  Update for Microsoft Office Word 2007 (KB974561)

  I get the error code 646.  I tried to install all three at once, one at a time and let the computer do as I turn it off.  None of them have worked.  Any help would be wonderful.  Thank you for your time.

  AnyaAlex

  You may have missed this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Don't arrive after Vista Ultimate Upgrade Windows Update to download SP1 for Windows Vista

  I have 2 computers were pre-installed with Vista Edition family content and Basic Service Pack 2. Due to a new system of distribution to come in I had to upgrade to Vista Ultimate. I bought the DVD upgrade containing all Service Packs. After removing the Service Pack 2 and Service pack 1 (in that order) Windows Update will not download Service Pack 1

  You have made or has not upgraded Vista Basic to Vista Ultimate computers?

  That said, Windows Update has nothing to do with upgrading a Vista computer.

  Given that these are specific consumer forums, try to publish in the appropriate Vista IT Pro instead-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro forum