Upgrades for new 7559

Similar Questions

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• Usually, there is a way to upgrade for current users of the software at a reduced price. I don't see something like that for Lightroom 6. I have to pay full price just to upgrade to the new version of standalone LR6?

  Usually, there is a way to upgrade for current users of the software at a reduced price. I don't see something like that for Lightroom 6. I have to pay full price just to upgrade to the new version of standalone LR6?

  Just go to the products

  Scroll to Lightroom and click on buy and then replace I want to buy lots of upgrade. The price is $79.

• As a gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version for the same product against the new upgra

  I have RECIVED YEAR EMAIL FROM ADOBE AS: as gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version of the product, even against the new order of upgrade"IS this UPGRADE FREE AND CE WHO SHOULD DO, HOW can I HAVE THIS UPGRADE?

  HOW I CAN PLACE THE ORDER AND IS IT FREE?

• secconf.Sql. If it will work for upgrades or only for new databases?

  Hello
  
  I'm reviewing oracle 11g features and found that few things need special attention, such as checking the settings and the changes in the default profile.
  
  Looking at the secconf.sql file, I found this note
  
  REM only invoked for databases of newly created, not for upgrade of databases
  
  My question is
  (1) if I update a database to Oracle 10 G to Oracle 11 G, will, these changes in profile by default and the audit take place or not?
  (2) these 11 G changes will happen if we create new databases using DBCA?
  
  Thank you
  Delphine

  If you take a peek of scripts by calling secconf.sql in 11.2 /rdbms/admin, you see that secconf.sql can be run from catuprgd.sql with the following calling sequence:

  catupgrd. SQL-> catproc.sql-> catpexec.sql-> execseq.sql-> secconf.sql

  You can retrieve it with:

   pwd
  /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/admin
  [oracle@lx01 admin]$ grep secconf.sql *.sql
  execsec.sql:Rem  Only run the secconf.sql script for new database creations, not
  execsec.sql:      :secconf_name := '@secconf.sql';
  secconf.sql:Rem $Header: rdbms/admin/secconf.sql /main/3 2008/10/26 23:05:27 apsrivas Exp $
  secconf.sql:Rem secconf.sql
  secconf.sql:Rem      secconf.sql - SECure CONFiguration script
  [oracle@lx01 admin]$ grep execsec.sql *.sql
  catpexec.sql:@@execsec.sql
  execsec.sql:Rem $Header: execsec.sql 12-jun-2006.13:39:34 rburns Exp $
  execsec.sql:Rem execsec.sql
  execsec.sql:Rem      execsec.sql - secure configuration settings
  [oracle@lx01 admin]$ grep catpexec.sql *.sql
  catpexec.sql:Rem $Header: catpexec.sql 06-jan-2007.20:57:33 rburns Exp $
  catpexec.sql:Rem catpexec.sql
  catpexec.sql:Rem      catpexec.sql - CATProc EXECute pl/sql blocks
  catproc.sql:@@catpexec.sql     --CATFILE -X
  execcr.sql:Rem      Run from catpexec.sql (catproc.sql)
  [oracle@lx01 admin]$ grep catproc.sql catupgrd.sql
  @@catproc.sql --CATFILE -X
  

  Thus, it seems that catupgrd.sql still works secconf.sql. Given that catuprgd.sql is THE upgrade script (see http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/scripts004.htm#sthref3623), it seems that this secconf.sql is still running.

  But this is not the case if you read execsec.sql code and comments:

  Rem  Only run the secconf.sql script for new database creations, not
  Rem  for upgrades or any other reruns of catproc.sql.  The version column
  Rem  in registry$ is NULL while catproc.sql is running the first time
  Rem  on a new database.
  
  VARIABLE secconf_name VARCHAR2(256)
  COLUMN :secconf_name NEW_VALUE secconf_file NOPRINT
  
  DECLARE
     p_version  varchar2(30);
  BEGIN
     :secconf_name := '@nothing.sql';
     SELECT version INTO p_version FROM registry$
     WHERE cid='CATPROC';
     IF p_version IS NULL THEN
        :secconf_name := '@secconf.sql';
     END IF;
  END;
  /
  
  SELECT :secconf_name FROM DUAL;
  @&secconf_file
  

  In the case of database upgrade registry .version $ is not null and above the code will run nothing.sql instead of secconf.sql:

  [oracle@lx01 admin]$ cat nothing.sql
  Rem $Header: nothing.sql 18-oct-2001.09:57:38 Exp $
  

  It is therefore very likely that secconf.sql is not running during the 11.2 database upgrade (I think that the same should apply to 11.1).

• white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  Computer works wonders but new applications are not supported by 10.6.8

  Unless you have a specific reason to choose one plus one, El Capitan.

  (144668)

• Can I install Firefox in a way that will never check an upgrade for all users?

  In the approximately 500 mV VDI environment I would like to disable checking of upgrades for users of all virtual machines. We cannot update Firefox until we have ensured that the new version works with specific tools. Virtual machines are linked clones that are being refreshed to their State before logon after users log off. This causes the popup to come upgrade whenever users connect. Users are not allowed to upgrade, then it is a nuisance that I would like to eliminate them.

  I found that I can use on: config to disable checking of upgrade on the image, where all virtual machines are created, but cela will not shut it for all users for the user with which the image is kept. Is there a central setting that allows me to do this? Or this would require a change in profile all users? And if the latter, what a change I need to make to their profile?

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);

• I just upgraded the new 6.01 FF and now I want to restore my previous version upgrade. How do I do that?

  I just upgraded the new 6.01 FF and I don't like the way it is prepared and want to return to the previous version. How I do that without completely uninstall FF completely? Help... Please tell me how > thank you

  Well, it's not as if you're upgrading! You don't downgrade your browser.

  But don't worry, the decommissioning process, it's like the upgrade. For example, you can install an older version without uninstalling Firefox!

  Don't forget to hit "resolved."

  IMPORTANT NOTE: Remember that previous versions may have security problems. The latest security updates, you MUST upgrade to the latest version. That's what I would recommend. Thank you!

• Why send is download 250 messages every time I check for new messages?

  Since the upgrade to iOS 9 on my iPad and iPhone I'm drowning in old email!  My POP with Bell (sympatico) account has eight years of my emails on their server. When I check for new mail, my devices download 250 messages each time.  I tried various options in parameters (pressure, extraction etc.) does not. Bell's response is to delete all messages.  There is no option in 'manage my storage' and the mail app uses 1 GB! This is not the case on my computer, so I think the problem might be with iOS 9. Mail is now trying to synchronize with the server?

  Have you tried to remove your email account, and adding back?

• CPU Upgrade for Presario SR1110NX?

  Is there an available CPU I can use an upgrade for a Presario SR1110NX? It currently has a Celeron processor (I don't know what type of socket). If not, is there a motherboard I can get low fees for this case that does not require update me all my (old) devices and memory? I don't want to buy a new machine until the summer, but my CPU usage is at 100%.

  Thank you

  Dante

  Hello

  Which will support your card mother MS-6577 (Giovani, Giovani2).

  Socket 478 for Intel P4 Willamette and Northwood 1.4 GHZ to 2.8 GHz or higher processors.

  Here is a link to NewEgg for a card mother microATX replacement. You will need to buy the DDR2 memory, but it's pretty inexpensive. All of your devices will work in this one. You need to replace the power supply. The diagram of the motherboard is not marked ATX is an owner of COMPAQ connector configuration. Try to use it on a new motherboard will probably lead many motherboard smoked and fried

• What is the best printer for new El Capitan?

  After installing the new OS X El Capitan, my printer (which I love!) is not compatible.

  Anyone know the best printer to use with this new OS?

  It's a very broad question without knowing what are your needs and desires. There are many printers that works very well with El Capitan. If give you some details on what you are looking for like do you print a lot, often, do you need color, multi functions, is a consideration of price, etc., while others may give more specific advice to your needs.

  Also, have you checked the Web site of your printer to see if they have upgrades for El Capitan or if they are planing to release drivers for it? Have you considered the use of the generic drivers for your old printer?

  For me, I use an HP multi function B & W laser printer. HP seems to face this day on compatibility better than many other brands. I gave up jets of ink because of the high cost of the ink cartridges and cartridges drying up of low use.

• HP 6005 Pro SFF: Replace video card ATI Radeon HD 4200 graphics upgrade for HP 6005 Pro SFF

  I have a HP 6005 Pro SFF with a 240W PS, and I want to upgrade the video card.  It has an ATI Radeon HD 4200.    An HP Forum person (Paul Tikkanen) recommended an upgrade for a 6005 using a video card optional for the HP 6200 Pro SFF:

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439&cm_re=hd_6450-_-14-121-439-_-product

  Please confirm it also works for the 6005.  If I replace it, can I actually remove the Radeon 4200 and replace it directly at the space of the same card mother slot to save space of PCI Expansion slot, or do I use the expansion PCI Express 16 x slot?   If so, is the procedure for the direct replacement documented anywhere?

  Hello:

  The ATI Radeon HD 4200 Video on your PC is the graphics chip integrated according to page 14 of the quickspecs at the link below. In other words, the graphics card is a chip that is soldered to the motherboard.  It is not in an expansion slot.

  http://static.highspeedbackbone.NET/PDF/HP%20Compaq%206005%20PRO%20Business%20pc%20Quick%20Specs.PDF

  The dedicated PCI express x 16 slot should be empty now, and this is where you install the card I have recommended.

  I don't see why the HD 6450 work.  It works in the dc7800, dc7900, Pro 6000, 6200 pro, 8000 Elite, Elite 8100 and 8200 Elite business desktop PC.

  You just need to make sure that uninstall you the HD 4200 graphics card and the driver in Device Manager.  Also check the uninstalling the driver box.

  Also uninstall catalyst control center software in the Add/Remove programs in the control panel section, stop and disconnect the PC, install your new video card and the driver for the 6450.

  Here is the link to the service manual. See Chapter 2 pp 20-25 for the installation procedures card expansion, paying special attention to the info of PCIe x 16 slot.

  http://h10032.www1.HP.com/CTG/manual/c01870938

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety