Upgrading from 3.2 to 4.1 ACS ACS self.

Similar Questions

• Upgrade from 5.0 to 5.2 ACS

  Hello

  Currently, I would like to upgrade an ACS primary / secondary 5.0.0.21.6 to the latest version 5.2

  The documentation says to use the recovery for the 5.1 CD provisional and then upgrades 5.2. Is this the same as the ISO image, which you can download from CCO?

  This will cause a problem with the license that you are actually broken box?

  Is it possible to use the ftp repository to make the upgrade without using an ISO / restoration disk image? What keeps intact licenses?

  When you upgrade you restore type "router" configuration and databases on both devices of the CSA? I guess that the answer to this depends on if the recovery / ISO image is used.

  Should I expect my primary / secondary relationship works on 5.1 or can I do each a 5.0 to 5.1 5.2 all in one fell swoop can sort out the primary / secondary ACS distributed environment?

  Thanks for any help on this

  Mark

  The recovery image would be an ISO format and upgrade would be a .tar format. Yes, these files can be downloaded EAC.

  You have read the correct procedure. After reimage, you must reinstall the license.

  We cannot use FTP for ACS 5.0---> ACS 5.1 upgrade. We have to reimage here, no other way.

  backup

  To perform a backup (including data ADE OS as host name, IP address) and place the backup in a repository, use the backup EXEC mode command.

  backup backup-name-name of the repository repository

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/command/reference/cli_app_a.html#wp1888749

  backup GBA

  To save a configuration ACS (not including the data of the BONE of the ADE), use the backup of the acs in EXEC mode command.

  repository backup backup-filename ACS repository-name

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/command/reference/cli_app_a.html#wp1886805

  Upgrade can be done while we both GBA in sync, you must unregister and register them again.

  I hope this helps.

  Kind regards

  Jousset

  The rate of useful messages-

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Upgrade from 17.0.9esr to 24.0esr, now all downloads are not visible at all anywhere

  I just upgraded from 17.0.9esr to 24.0esr. At first I noticed that download statusbar has not shown all downloads when they have been downloaded, so I decided to remove it. That has not changed anything because I do not see in tools-> Downloads tab. I tried to play with the browser.download.useJSTransfer and the browser.download.useToolkitUI, I've seen in my search, but they do not help. I also tried to change the options of the private browsing mode, and although I can see that downloads fail, I don't see when they download. I don't know what is happening.

  I have reset the settings of firefox and it seems to be fixed. I could not identify any option that could have been the cause. He could download status bar. I no longer need because new download managers to work pretty well.

• Why the scroll bar arrows disappeared from Firefox when I upgraded from Fedora 17 to 18 years?

  Recently, I upgraded from Fedora 17 to 18 of Fedora. Before the update, Firefox worked perfectly. Now, the arrows have disappeared of the scrollbar on the right. How can I get back them?

  This problem is not moved in other applications - in Firefox.

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Do you have a scroll bar (that is, only the buttons have disappeared)?

  You use the default theme of Firefox (Tools > Modules > appearance)?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  You can try to check if another theme or icon pack Linux brings them back.

• UPGRADE FROM WINDOWS 98 TO WINDOWS 98SE

  Hello
  I have a Portege 3110CT I want to upgrade from Windows 98 to Windows 98SE. Is it possible and how can I do?
  Francis

  Hello francis

  Do you have the CD of Toshiba Recovery and Tools & Utilities CD for this laptop?

• Why all the new features do not appear when I upgraded from 3.6.15 4.0?

  I upgraded from 3.6.15 4.0, but the appearance of Firefox has not changed at all. There is no Awesome Bar, Firefox Button or bookmark button. The only change was 2 of my addons have been disabled.

  The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• Main problems after upgrading from XP to Vista on Qosmio F20

  I have recently upgraded from XP to Vista on my Qosmio F20 and having problems. It seems that I lost the ability to change screen resolutions, to adjust the volume, brightness, etc. Basically, I lost the laptop functions. I also tried updating the BIOS but get the following error message "BiOS update only is not supported OS - unsupported OS or service pack installed.»

  This also makes very slow computer.

  You now have a few questions, or you wrote just a report on your experience of Vista on Qosmio F20?

  The fact is that Toshiba does not support Vista on this laptop model and thereby you will ever complete Vista of operation (including the Toshiba tools and utilities). For supported laptops, Toshiba offered special Vista supporting BIOS but for your laptop, this update of the BIOS does not exist.

  Sorry! :(

• HP Pavilion dv7-6c02em: should I upgrade from Win7 to Win10? Better driver support?

  Hi all
  I have a HP Pavilion DV7 with 7690 m XT graphics card.

  Model of the laptop is dv7-6c02em.

  Is this smart upgrade from Windows 7 to Windows 10?
  (I have heard and read about a lot of problems with the drivers are missing.) When I check my driver models his almost empty page.
  
  Does anyone have any experience with the upgrade to windows 10? (both good or bad)

  PS - I don't trust more HP and their assumption of the pilot, also its my work laptop. (associated with very important Bank of programs on this subject).

  Thank you

  VENOMs7000 wrote:
  

  Hi all
  I have a HP Pavilion DV7 with 7690 m XT graphics card.

  Model of the laptop is dv7-6c02em.

  Is this smart upgrade from Windows 7 to Windows 10?
  (I have heard and read about a lot of problems with the drivers are missing.) When I check my driver models his almost empty page.
  
  Does anyone have any experience with the upgrade to windows 10? (both good or bad)

  PS - I don't trust more HP and their assumption of the pilot, also its my work laptop. (associated with very important Bank of programs on this subject).

  Thank you

  1. the older system with Win7 should not go Win10 that HP provides no support any drivers for it unless it was made in 2013.

  2. your specific HP PS comment is false with no facts to backup. We should refrain from making these comments - does nothing to help other users.

• I just upgraded from Lion to El Capitan. Impossible to update iphoto now. How to do?

  I just upgraded from Lion to El capitan (face in RAW format with a new camera compatibility). iPhoto does not. A message says: not available for this material either under the name of another user or reimbursed. How is it possible with a MacBook pro reinstalled with iPhoto?

  How to get this update? 5I'm very few qualified in the computer and not ready for the pictures). Thank you for the France.

  This may be a long ball, because you are upgrading a Lion at El Capitan.

  According to the version of iPhoto you had on Lion, you may be able to recover iPhoto.

  And possible only if you iPhoto with your ID on your Macbook Apple.

  Read this

  Cannot update iPhoto because it is not available in the App Store

  Merry Christmas

• Thinking about upgrading from Windows 7 to Windows 8? Consider these things

  Hi all

  If you are thinking about your computer for the upgrade from Windows 7 to Windows 8, there are a few things to consider.

  I hope this information helps you help with a successful upgrade!

• Windows 7 upgrade from Vista crashes at 72%.

  My Windows 7 upgrade from Vista stopped at 72%. After the reboot, I am unable to restore or continue the upgrade. Portable computer continues to restart, but still ends upward with the error message. "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. "No disk Windows 7. Only received online.

  Hello cdrudd, welcome.

  We start back up your data first, if you have a Windows Vista recovery or install CD/DVD, try this:

  1. connect an external drive or flash drive
  2. place the CD of Windows Vista in the status bar, and close
  3 boot the disk and choose "repair my computer".
  4 choose "Command Prompt"
  5. type the following command:

  CD c:

  | Come in

  users of CD

  | Come in

  dir

  | Come in

  From here, take note of what your user name folder name. Then type...

  copy c:\users\yourusername e:\users

  | Come in

  * ' e' will be the letter of your external device. It could be F, G, H or so now (according to which drive letter was already used)

  Once the copy is complete, you can pretty much use the following commands to keep the rest of the data:

  copy c:\program files e:\program files -copy everything in the folder program files

  You can use the dir command to view the contents of a directory. Then, you can use the cd command to navigate to a directory.

  Let us know if you have a copy of your user data backup job. Please let us know if you have any questions.

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade from XP to Vista, how do I remove the Points of XP restore

  I upgraded from XP pro to Vista Ultimate. I tried to delete old restore points left by XP using disk cleanup. No luck. I do not search the forum, but whenever the answer is; "use disk cleanup. Your suggestions are welcome.

  Access to the System Volume Information folder
  http://support.Microsoft.com/kb/309531 TaurArian [MVP] 2005-2010 - Update Services

• upgrade from vista to win7 without backup of files

  I'm upgrading from vista to windows 7, and I wonder how it is risky to not back up my files beforehand.  something sentimental value is already stored; What remains could be fairly easily replaced, so a lot of time.

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the upgrade from Vista Home Premium to Windows 7, I can't connect to my router (Netgear WNDR3300)

  After that upgrade from Vista Home Premium to Windows 7 - I'm unable to connect to my router (Netgear WNDR3300) - message network States "the settings saved on this computer for the network do not match the requirements of the network" - any ideas what could have changed during the upgrade to make me lose my connection to the wireless router?

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft