Upgrading RAM on Satellite A200-1CR

Similar Questions

• Question about upgrading RAM on Satellite A200-1CR

  Hello

  I have the Satellite A200-1CR, PSAE0E-02G01TSK
  I have 2 GB of RAM
  I can install 4 GB of RAM (because I try 2x2Gb 800 MHz) and don t work.

  Do I only 667 MHz or my laptop supports only 2 GB?
  Thank you

  Hello

  Your laptop can be upgraded to 2 GB top only and for the upgrade you must use 667 MHz compatible modules.
  To correctly update I recommend 2 X 1 GB DDR2-667 with PA3512U-1M1G part number.
  Good bye

• Boot problem after upgrade RAM on Satellite A200 - 1 DR

  Hello

  I have a laptop Satellite A200 - 1 DR (with 1 GB of DDR2 RAM) and it is 5 days old. I bought an another 1 GB of Corsair RAM (DDR2 PC5300 5-5-5-12 as the first). The problem is that with both submissions the laptop not boots or boot boxes when the quiet boot option is enabled in the BIOS but windows Vista refuse to go or to restore.
  I also tested the memory only Corair on the first location of memory of the laptop, and it works perfectly (vista and memtest86).

  So I tried only two submissions on the second slot of memory of the laptop, and the two do not work: quiet Boot option on vista cannot go and memtest86 freeze after 1 sec. When the quiet boot option is disabled, the bios memory test freeze to 256 MB (with 2 memories it freezes at 512 MB).

  To me there seems to be a bug in the BIOS, you have any information on these bugs?
  Thanks in advance

  Hello

  a man who is not a bug in the bios. Have you ever heard of compatibility problems between the memory modules? The strange thing is that the memory modules can have the same features should not work together when they are not compatible with each other.
  You have two different manufacturers using different modules and pcb´s (printed circuit board).

  So if you're going to tell me what manufacturer's stock module I'll tell you that they are not compatible because I really know that privateers work right and good when you install corsair two modules (or how I want to say. TWO MODULES OF THE SAME MANUFACTURER).

  This is it and it s the same story in desktop computers. I have two desktop computers in my office at home and one of this for overclocking. I had a lot of modules in my machine, so I had a lot of problems at the time of the twinning of the two different modules. And that's the thing why I tell you this, because I really have knowledge about this thingys. :)

  Just buy an another corsair modules and put your stock on ebay module. You will see how your machine will work. Or better, bring back the corsair, sell your stock on ebay module and buy a pair of the best modules from kingston, you can get since the modules have absolutely no problems with compatibility.

  That's my opinion. And nothing to do with a few bugs of bios or something else...

  Welcome them

• Curiosity to upgrade RAM on Satellite A200

  Hello world

  I want to improve my computer Toshiba A200 performance and then I decided to buy a Module of Ram 2 Gb memory.
  To research the results of this forum as well as the report of an application called Everest (I'm sure you know) is DDR2 - 667 MHz (PC5300) RAM DDR2 200 pin SO-DIMM memory I have to buy.

  I was about to buy this kind of memory and then looking for more information on the internet, I found a very interesting http://www.techsupportforum.com/ page with a lot of useful post on the world of computing. One of the post was titled "Selection RAM for your laptop", and he explains that memory that fits your computer depends on the processor you have... It's curious because my T7500 processor, and in the post, I find it

  Intel Core 2 Duo T7500 processor:
  DDR2-800 MHz (PC6400) RAM DDR2 200 pin SO-DIMM

  So, what do you think, that I can buy this type of memory (faster than what I put together) or the information contained in this message are set to false.

  Thanks in advance.

  For your laptop model Toshiba (A200) says:
  Type of extension of DDR2 - 533 MHz 512 MB, 1 GB, 2 GB memory (works of system at 533 MHz 667 MHz is plugged).

  Forget the processor system Bus clock speed. For the RAM upgrade is the relevant FSB speed.

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Satellite A200-1CR: I'd like to expand my RAM to 2 GB or 3 GB memory

  Hello.

  I have toshiba satellite a200-1cr. I'd like to expand my ram up to 2 or maybe 3 GB.

  Can anyone tell me what kind of ram I should buy, type, etc...?
  Also I don't know if I have 2 x 512 MB or 1 GB.

  I have a free slot or I have to remove one of my 512 ram?

  Thank you
  PS: I can't find my model in the toshiba Web site more... (model. psae0e No.)

  After a long investigation and after visiting various websites I found the info that this laptop was equipped with 2 x 512 MB DDR2 (667 MHz) modules

  So if you want to upgrade the RAM you can use 512 MB, 1 GB, or 2 GB modules.

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=30728&ft=m&St=3

• Satellite A200-1CR: Question about upgrade HARD drive

  Hi all...
  I would like to ask something...

  I have toshiba Satellite A200-1cr with 120 GB HARD drive...

  I would like to change my HARD drive. I found a disk hard 2.5 "with 250 GB.

  My questions are the following:

  (1) my knowledge of the workstations are very very good. Is it easy to change myself?
  I guess it is, but I want to be sure... I guess that is on IDE, right? No SATA at all?

  (2) if I changed it I lose my warranty?

  (3) can I give my laptop Toshiba in Greece official store and let them make the change?
  May I take in an informal shop, too?

  (4) can be put on the laptop 2 x 250 GB such US new computers laptops from toshiba?
  Is there enough space in the laptop for such a change?

  Thank you in advance...

  Hey Buddy

  It is good that ask you the question.

  (1) the Satellite A200-1CR supports SATA and no IDE interface and that's why you need a SATA HDD. It of really not difficult to replace the HARD drive and as far as I know, you should find a few details in the user manual. There is a useful statement and photos that explain the entire procedure.

  (2) hm AFAIK the drive replacement HARD will not void the warranty, and has no effect on the State of security.

  (3) you can also contact the maintainer authorized Toshiba in your country for a HARD drive replacement, but in my opinion that is not really necessary because the replacement is not very sensitive. As I said above, check the user manual.

  (4) I don t think that your laptop will support 2 x 250 GB HARD drive.
  Of course, there are a few other series laptops which are abele to support two hard drives but I n t think that your laptop A200 support.

  Just a small comment on the new HARD drive:
  The fact is that some more HARD drive are not supported by the BIOS. I mean an upgrade to 120 GB to 250 GB drive HARD is really a leap one possibly your BIOS would not recognize the HARD drive correctly.
  So I recommend to test the HDD first before buying.

  Good bye

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Technical need info on satellite A200-1CR

  Hello!

  I have a laptop Satellite A200-1CR. I can't find any technical info on the toshiba homepage.
  I registered my laptop, when I click on properties of my notbook, become after messsage:
  "I'm sorry, but this product is not available in your region."

  I can't find it in the A200 list too. (over 15 models without my 1CR)
  My problem is that I don't know the settings of my laptop. I didn't ' know how can I upgrade without this info. For example, chipset, cpu, max FSB socket, etc.
  Can someone help me?

  Don't work on my laptop or not product online Information Service.
  Any suggestion?

  Thank you very much!

  I find a Toshiba brochure that provides many useful information on your laptop:
  http://EU.computers.Toshiba-Europe.com/contents/Toshiba_teg/EU/others/brochures/April07/en-DB_NB_ProductGuide_Apr07_low.PDF

  In addition, you might find a lot of useful information in the manual of the user which is preinstalled on your laptop. Should check out!

  A tip;
  You want to find information on your hardware specifications, try to install a tool like Everest home for hardware diagnosis.

• Question about shortcuts FN on a Satellite A200-1CR

  HY
  I have a problem... or that's what I think it is... I bought a new TOSHIBA Satellite A200-1CR with Vista Home Basic preinstalled and I upgraded to Vista Business. The problem is in what regards the use of the FN key with additional shortcuts... With the help of these shortcuts is tricky because I don't really know how they work... Under Windows, after starting at the top of the screen, I have a few buttons (exactly the FN shortcuts) that I can use by keeping the mouse over and they slide down, but the problem is that after these buttons appear to the use of the FN keyboard hotkeys is disabeled... or kind, because I can use FN + F9 , FN + F10 shortcut FN + F11. Please help me and tell me if this is normal... and if not tell me how can I fix. Thank you!

  Hello
  Oh, that's normal, Don t worry. You can disable the buttons and then a little work with the FN keys.
  Just remove that bar on the top of the autostart and he won´t bother you more.

  Welcome them

• Is recovery DVDs the only disc with Satellite A200-1CR

  I wonder if I had all the discs with my laptop Satellite A200-1CR, because I can't make heads or tails of the files on the recovery DVDs. Where are all the programs that I should get with the computer., and I had everything installed from the beginning. I want to reinstall windows, but I am concerned if I have all the programs like: winDVD and Norton Security and all the driver.
  Thank you!

  Hello

  The Toshiba Recovery DVD is only one of the disks that came with your laptop.
  On this DVD, you'll find a Toshiba recovery image that contains the operating system Windows, drivers, tools and additional software.
  If you want to redefine the laptop to factory settings then just boot from the recovery disc and the installation will begin.
  But note; the recovery DVDs will format the drive so HARD integer if necessary backup data.

  Other programs like Win DVD or Norton Security are OEM versions and, therefore, are only on the Toshiba Recovery DVD. It of not possible to download it!

• Satellite A200 - 1CR PSAE0E DVD disc does not apper in workstation

  I am the owner of the computer laptop above Satellite A200-1CR PSAE0E-02G00YA
  RAND, I have problems with my DVD - RW DRIVE.

  I can't see under my computer.
  I am running Windows Vista and need a driver updated that I can't find anywhere.

  Please help as soon as possible... Thank you

  Hello

  Try this short workaround:
  -Go to Device Manager and remove right CD / / DVD drive from the list of devices
  -Start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop

  Now after the laptop has rebooted, the OS should reinstall the STRANGE and the STRANGE should appear in my computer.

  Welcome them
  Jack

• Satellite A200-1CR - cannot find my BIOS

  Hello

  I have a Satellite A200-1CR (part number: PSAE0E-02G00YAR) and I can not find my BIOS. I need to make a crysis recovery disk as I interbted the update of the BIOS. Any help to find the file please?

  And observations about crysis recovery thing is more than welcome :D

  Thanks in advance everyone

  Hi iq860,

  Official website of Toshiba, you can download the latest version of the BIOS, but you can find it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Satellite A200 is a little more if you can find it in * Archives *:
  * Archive * > Satellite > Satellite a series > Satellite A200

  I hope that helps! :)

• Keyboard broken on Satellite A200 - 1CR PSAE0E

  Hello

  I have this laptop:
  Model name: Toshiba Satellite A200-1CR PSAE0E-02G012G3

  The keyboard is broken (of and <1>key).
  Can I replace it?

  I want to buy a new keyboard.

  Ovidiu

  Hello

  This is possible. If you want to buy and replace the keyboard please contact the service provider authorized in your country.

  The nearest ASP, you will find here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
  Good luck

• Audio input does not not on my Satellite A200 - 1CR WXP SP2

  Hello

  My laptop is Satellite A200-1CR. Earlier I changed my Vista laptop to Windows XP SP2 home edition, but I have a problem. My audio does not.

  Realtek HD Audio input and output driver is there but does not
  Upcoming audio output.
  But not a supported Audio input.
  Please someone help and replay quickly for me.
  I'll wait for your replay.

  Thank you.
  Arul.A

  Hello!

  I just wanted to share a few experiences. When I shot down my system to Windows XP edition family of pre-installed Vista (Satellite A100) I went to the support section of the official site of Toshiba and downloaded all available for my laptop to XP. And everything has been working fine until now. Oh, I think this chipset driver I got from the Intel site.

  Maybe try to re - install some components like chipset driver (as the audio is embedded)?

  Good luck!