Uplinks slow RV180
Hello
I have experience slower speeds on the ports that are used for the uplink on my RV180:
-to plug my laptop directly into the RV180 that is used as a router WAN, I have beautiful wanspeeds Mbit/s approx. 98
-When you plug into the switch 8-port SF302 - 08 p it's binding to the RV180, the maximum speed drops to 25 / 30 Mbps
-same symptoms for a little d-link switch: when you plug in the switch of 25/30 Mbit / s, when you plug its uplink directly into my laptop, I get 95 to 100 Mbps.
I went through the configurations, but do not know what could be the problem.
Hello
Note that the reports of the unit that he negotiated the speed/duplex. Also, I have experienced several scenarios in which 1 G when it is connected to 100M goes haywire. One of our fixes is to encode in hard botht he speed and duplex on TWO ports of 1 G and 100 M port, but in your case, you can't hardcode the settign 100 m because it is unmanaged
IM positive it's trading port of the switch you have, given that it is a switch (and cheap): P
Status > statistics the only way to check the speed of the port of port? -Yes
PS: Have you any other switch that it supports 1 G? How about you, try another port on the RV?
Tags: Cisco Support
Similar Questions
-
RV180 WAN/Internet very slow speed via WAP4410n (Port RV180 speed problem)?
Hello
I have a base set up on the RV180, no etc. VPN running 1.0.5.4 Firmware (latest) and use a browser of WAP WAP4410n plugged into a LAN of the RV180 port. I have a SG100D Gigabit Switch also connected to a port RV180. My WiMax ISP provides 12 MB.
When I leave speed Port on the RV180 & WAP4410n on Auto neg. They hook at 1 GB and I have ONLY 2 MB Internet speed on wireless clients with no reported ignored packets on each device, when I change the port to 100 MB on the WAP4410n Rx. speed speed is normal at 12 MB! The RV180 also indicates the speed of the LAN port for 1 GB... it is obviously wrong! Obviously, forced to run the LAN of WAP port to 100 MB so I can get the ISP... normal speeds is limitation all my wireless to wired LAN traffic (and vice versa).
I tried several configs RV180 ie. Simplified of bare bones, exchanged cat 5th etc. etc. WITHOUT change. With another router, there is no problem with the port of WAP4410N at 1 GB and ISP speeds are normal. ISP speeds are also normal via the Gigabit switch to other boxes, BUT if I plug the WAP4410N in switch WAN speed is 2 MB if the WAP4410N is set to 1 GB port speed!
With the RV180 unable to define a manual port 100 MB speed (see 1.0.5.4 Firmware release notes), that strongly leads me to believe that it is a problem of data Port RV180 specific WAP WAP4410N somehow.
Their are many positions reports slow Internet with the RV180, but none of them have a solution. Ideas, any help would be greatly appreciated that Ive lost too much time already trying to solve this router ÷ # $$ / / / &. As this is my first post I hope I posted in the appropriate forum.
Thank you... Rob.
Thank you for the update.
-
Linksys EA2700 VS. RV180-K9-NA
have a few last questions these routers EA2700 and 1 RV180-K9-NA. can it manage TWC ultimate speed 2. It's a very good reliable router, linksys be4 tried and some were not 3. can we manage several devices at the same time without slowing down? BTW, I know he need a wifi sepret for the RV180 thing which is the better faster more reliable choice?
According to the scenario if you're more concerned at wire speed, there will no problem. Since the two router have Gigabit Ethernet Ports.
The fundamental difference between the two routers is: EA2700 supports the features dual band wireless where RV180-K9-NA is used for VPN connectivity, but do not have the wireless function.
Here is the link for more information on RV180-K9-NA: http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps11995/c78-697397_data_sheet.html
Here is the link for more information on EA2700: http://homesupport.cisco.com/en-us/support/routers/EA2700
-
Slow performance when multiple connected clients, WSM 6.0 x 64
Slow performance when multiple connected clients, WSM 6.0 x 64
Hello
When users logs on, its quick and pleasant.
However, when many connects, it slows down everything.
The linked site server has basic 16 total, 24 GB of RAM, and 8 x 300 GB 10 k in RAID10 discs.
I see the server is loading rather low, he got 4 x 1 Gbit/s in the lacp to a switch of concert team, then all switches have 1gig uplink.
The server use never more than about 10 GB of RAM, this could be the problem and how to get the server to use more RAM?
Total cpu load stay about 1 to 2%, network, all about 1500Mbps picks
There is only one 25 GB os image file, and it slows down when all about 30-40 users open a session.
This affect MaxSystemCacheMBytes? If I for example 1% or 200 MB, might lower it being 'forced' to spend more RAM?
Screendump of x 64 connected site server
-
rv180 has no RADIUS under security option
We used RV180W devices and the security, there is an option to configure a RADIUS server (we use it to authenticate the IPSEC VPN with Active Directory connections).
We have installed a RV180 (wireless) and it seems to be missing the RADIUS configuration options. Documentation is not State of RADIUS is not supported on the RV180. Indeed, it involves two models should support this feature (page1 under strong security).
http://www.Cisco.com/c/dam/en/us/products/collateral/routers/rv180-VPN-r...
I applied the last (to date) version 1.0.4.14 without change. On a whim, I checked some of the other RV180 we installed and found the RADIUS was missing in a RV180 with 1.0.3.10 firmware too, yet all versions of RV180W we made do.
This is a firmware build feature that was "missed" and never caught or documentation does not reflect the features actually supported or has been deleted after the liberation (false advertising in my humble OPINION).
I do not consider the RADIUS authentication an exclusive feature in wireless technology.
Has anyone else encountered this problem? RADIUS is supported on the RV180 and if so, how can I access these settings?
Ref: Cisco Support box 630249873
With the support of Cisco, I confirmed that it is a feature not in the firmware RV180.
Adding to the next version maybe not possible then Cisco opted replaced my unit with a RV180W that supports the RADIUS authentication (an offer I think).
Cisco did not specify if the RADIUS feature will be added to the RV180 firmware (or not) in the future. Thus, the documentation will be updated to reflect the current functionality or a future update can add this feature to the RV180. My advice would be to check the most recent firmware release notes if you need this feature or get the RV180W instead if you consider the RV180.
So far, my experience with the RV180W was satisfactory (although the web gui is slow sometimes). I also used the RV110 and found the VPN settings exposed on that to be very limited in comparison. I choose to use the vpn ipsec shrewsoft client with of the RV180W rather than the fast Cisco VPN client (which seems not to connect more than not).
-
SRW2024 + uplink SRW2048 problem
Hi all.
I have two switches SRW2024 and SRW2048
I had connected on SRW2048 (Switch 1) single PC and SRW 2024 (Switch2) iscsi SAN, ESX Server and a couple of NAS.
I use to uplink port 2024 12 and 48 of 2048.
Now in this situation when I connect to my PC (1 switch) to ESX SERVER and try to download a data store the speed is very slow.
If I change the position of my PC to spend 1-2 switch che connection ethernet cable is perfect, because going to the uplink and go directly to the switch.
I think the problem is on the uplink cable, I try to change the cable and the port, use optical miniGb... but the result does not change.
Because now I don' t have any VLAN, use the switch without trunk or other default settings normal setting.
Another thing... If I use 2 normal switch without management... perfect work, the problem is the management of the uplink on SRW2024\2048 setting.
Any idea?
Thank you all for any help.
Hello
What you describe is quite strange, because when you're not cross VLAN should really happen to the wire speed, there may be a bit of a slowdown because of the extra link, but it should be almost imperceptible.
A few things I'd like to try another cable to uplink, make sure that it's Cat5E, since Cat5 may give you some problems with a gigabit connection. I would also try setting the port manually speed and duplex to 1000/full just to eliminate auto-negotiation as a problem.
I would also try using a different set of ports to connect the two switches, if the problem persists.
Just to confirm, from now on, all your devices are in the same subnet and VLAN correct?
How much of a difference of speed are we talking about here? Can you give some figures for PC transfer speed to the data store on the same switch and when they are on different switches?
Hope that some of this helps,.
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
* Please note the useful messages *.
-
Crashing apps and the slow performance since the installation of macOS Sierra
Hello
Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.
Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you
EtreCheck version: 3.0.6 (315)
Report generated 2016-10-07 16:52:11
Download EtreCheck from https://etrecheck.com
Time 06:53
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Apps are broken
MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro6, 2
1 2.53 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 371
Intel HD Graphics
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour
Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)
Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 412.88 GB Online
MATSHITADVD-R UJ-898)
Logitech USB receiver
Card reader Apple
Apple Inc. Apple keyboard / Trackpad
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Computer, Inc. Apple IR receiver.
Built-in ISight from Apple Inc..
Mac App Store and identified developers
/ System/Library/Extensions
com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]
com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]
com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]
[no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]
NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]
HWNetMgr: Path: / Library/StartupItems/HWNetMgr
Startup items is no longer function in OS X Yosemite or later
[no charge] 7 tasks Apple
tasks of Apple 178 [loading]
tasks of Apple 86 [performance]
[no charge] 42 tasks of Apple
tasks of Apple 167 [loading]
tasks of Apple 95 [performance]
[performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]
[loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]
[cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]
[loading] com.google.keystone.agent.plist (2016-07-13) [Support]
[cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]
[cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]
[loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]
com.Adobe.agsservice.plist [running] (2016-08-19) [Support]
[loading] com.adobe.fpsaud.plist (2016-08-30) [Support]
[loading] com.apple.installer.osmessagetracing.plist (2016-09-14)
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.teamviewer.Helper.plist (2015-03-03) [Support]
[cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]
[loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]
[loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]
com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]
DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]
OVSHelper: 1.0 (2010-12-10) [Support]
OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]
NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]
AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]
DivXBrowserPlugin: 2.1 (2010-12-10) [Support]
QuickTime Plugin: 7.7.3 (2016-09-14)
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe
iPhotoPhotocast: 7.0 (2010-07-14)
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]
AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]
JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK
Picasa: 1.0 (2011-03-29) [Support]
DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)
DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)
DivX (2010-12-10) [Support]
Flash Player (2016-08-30) [Support]
Logitech Control Center (2011-11-05) [Support]
Time Machine not configured!
5% kernel_task
5% WindowServer
1% com.apple.AmbientDisplayAgent
1% xpcproxy
0% fontd
Top of page process of memory: ⓘ
Kernel_task 432 MB
Mdworker (15) 430 MB
Airmail beta 283 MB
152 MB Finder
Sandboxd 147 MB
476 MB free RAM
3.53 GB used RAM (1.41 GB being cached)
Used Swap 0 B
7 October 2016, 16:39:48 Self test - passed
7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash
/ Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta
October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang
/ Applications/App Store Store.app/Contents/MacOS/App
October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang
October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang
/Applications/preview.app/Contents/MacOS/preview
October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang
October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang
/Applications/Firefox.app/Contents/MacOS/Firefox
October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang
/Applications/pages.app/Contents/MacOS/pages
October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang
/ / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang
UNKNOWN PATH
Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?
Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?
I'm not sure I'd worry about the plane crashes - it is listed as beta software
-
MacBook pro mail on El Capitan running slow? I have a lot of memory and storage.
Slow mail. 9.3: if I remove large attachments in emails that will make e-mail faster turnaround? I have around 100 emails in email with attachments to file 15 MB image on average software.
Thank you very much for your help!
OS X El Capitan
10.11.6 version
MacBookPro 13 inch 2011
Processor Intel Core i7 2.7GHz
16GB 1333 MHz DDR3 memory
Mackintosh of HD boot drive
Intel HD Graphics 3000 512 MB graphics
Mail Version 9.3 (3124)
Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.
-
10 do iPad iOS 2 Air running slow
After the upgrade to iOS 10, I noticed my iPad 2 Air starts to run slowly. I mean by "slowly" as slow as my old iPad Mini 2 ran on iOS 9. It is a huge problem, and I'd rather not buy a new iPad. Any ideas?
Hi MBCollector672,
Thank you for using communities Support from Apple. Sorry to hear you're having this problem with your iPad 2 Air. I'm kinda not clear about the exact nature of the slowness you describe (what specific aspects are slow, what is compatible or intermittent, etc.), but if it's pretty repetitive, you can try to stop all currently open applications, restart your iPad, then test for the slow pace. You can find the following articles useful:
Force an application to close on your iPhone, iPad or iPod touch - Apple Support
Restart your iPhone, iPad or iPod touch - Apple Support
You can also see if applications consume an amount unusual or unexpected autonomy. Applications that do are often "stuck" in the background, consuming the CPU power (and thus battery), which can lead to slow overall system. This article may also be useful:
On the use of the battery on your iPhone, iPad and iPod touch - Apple Support
Kind regards.
-
My macbook air 13 "(2015) is very slow, even after a clean install"
Hello
I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.
Etrecheck give ' "Performance: poor"»
Is there a hardware problem? or what to do?
Thank you
EtreCheck version: 3.0.6 (315)
Report generated 2016-10-05 10:18:11
Download EtreCheck from https://etrecheck.com
Duration 17:11
Performance: poor
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
too slow
MacBook Air (13 inch, early 2015)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir7, 2
1 1.6 GHz Intel Core i5 CPU: 2 strands
8 GB RAM not extensible
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 40
Intel HD 6000 graphics card
Color LCD 1440 x 900
OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour
SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)
Storage of carrots: disk0s2 120.47 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
[no charge] 6 tasks Apple
tasks of Apple 166 [loading]
[running] Apple 58 jobs
[killed] 9 tasks of Apple
9 killed process lack of RAM
[no charge] 47 Apple jobs
[loading] 158 jobs Apple
[running] Apple 77 jobs
[killed] 8 tasks of Apple
8 killed process lack of RAM
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]
[loading] com.bittorrent.uTorrent.plist (2016-10-04)
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)
iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uTorrent program (/ Applications/uTorrent.app)
CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Default browser: 601 - SDK 10.11 (2016-09-03)
QuickTime Plugin: 7.7.3 (2016-07-09)
None
Time Machine not configured!
14% WindowServer
4% kernel_task
0% SystemUIServer
0% cloudpaird
Top of page process of memory: ⓘ
670 MB kernel_task
Mdworker (11) 188 MB
Com.apple.CommerceKit.TransactionService (2) 41 MB
Finder 41 MB
Mds_stores 33 MB
5.02 GB of free RAM
2.98 used GB RAM (1.82 GB being cached)
40 MB used Swap
5 October 2016, 09:38:39 test - passed
Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?
-
Slow movement of the icons of file
I just upgraded to Sierra and discovered that move file icons became very slow. Whether on the desktop or in a window, I can choose an icon of file instantly, but if I try to move, even a small distance, there is a long pause, and I often get the beach ball, until the icon jumps in position. In this case if I move the couple icon of millimeters right through the window.
The same thing happens if I move a file between windows. There is a long delay, then a 'Preparing [location] move' dialog box is displayed with a process bar. Another long pause, then a quick movement of the bar and the icon jumps to the new location. Even with a copy operation. Moving to and from the trash by clicking and dragging is also slow. File used for the test was 8 k on disk, 699 bytes of content, is not large files. Movement of file in the trash by command + delete soon also. Open the file information dialog box has been the normal speed.
I also started having very slow save as... dialog box speeds, slow opening and then slow to fill. The beach ball appeared regularly.
Any ideas?
Hello, N.W.J. Hazelton.
Thank you for using communities Support from Apple. I see your message that you met some slowness during the management of files on your MacBook Pro, since you upgraded to macOS Sierra. I know that personally, I want to be able to move, copy, and back up things quickly, without a lot of spinning Rainbow cursor to run, so I can see why you've posted. I'd be happy to help you.
When my MacBook behaving this way, I found a System Management Controller (SMC) reset helped. If you are not familiar with how to do this reset, see the following link:
Reset the management system (SCM) controller on your Mac.If you always see the same behavior after this reset, then start in safe mode can tell you if a program or process could be the cause of the delay. Follow the instructions here and test your functions copy/move while that started in safe mode: macOS Sierra: start in safe mode
If your MacBook Pro works fine in safe mode, reboot normally and check to see if the problem has been resolved.
Have a great rest of your week!
-
I have the same problem on two different computers. A new installation (of Sierra of MacOS) (with costs users, no restored settings, preferences, etc.) fixed, but not the other. (Past the wire: all Web apps suddenly slow; fan high speed).
On the computer that still does not, have the following processes often rampant and prevents the computer access to the servers to load pages, apps, etc..
- trustd
- messaging networks
- Safari
- Networking of Safari
- storeaccountd
- AKD
- accountsd
- nsurlstoraged
- nsurlsessiond
- syncdefsultsd
- cloudd
- com.apple.CommerceKit.transactionservice
Obviously the issue transcends the user the user and settings (because it affects the settings and new users).
So I guess that it is a problem with iCloud? A question of trousseau (iCloud)? How to fix this?
I am VERY interested in any orientation.
I just tried these steps recommended for new users of macOS with wifi problems: http://osxdaily.com/2016/09/22/fix-wi-fi-problems-macos-sierra/
The problem persists.
-
very slow Powerbook fine, iMacs
My family uses 2 iMacs (1 2013, 1 earlier) and an Apple Powerbook at home. 2 iMac is incredibly slow, but the speed of the Powerbook is fine. IMacs both have a lot of unused storage and memory and I completely restored two iMacs and deleted unnecessary files, but they are very slow. I have everything back up on Dropbox and wonder now if the slowness is something to do with the combination of the signal at high speed and by using several connections of Dropbox in the House. We have a Virgin Media Hub Super 2ac with advertised broadband router of up to 150 Mbps. I made a speed control using www.speedtest.com and the download speed is 105.81 Mbps and download speed is 9.70 Mbps. Any ideas anyone?
You can view a report of etrecheck for later analysis
www.etrecheck.com
but I would like to disable and remove dropbox to test the system and if they improve the problem there.
-
"Workflow" for Slow Motion DSLR
Hi, I've been experimenting with the creation of idle smoothly in a calendar of 1080/25 and questioned on the best workflow. (I used a Canon 70 d, stipulating that 50 frames per second at 720)
So: Chronology 1080/25 Pro Res FCP7 (majority of the 1080/25 source footage)
I want to add a short section of idle and for that I shot in 720/50 - but of course it is made at 25 frames per second when added to the timeline and playback is stuttering when 50% of the speed value.
So I sent the clip (at 50%) to 4 Motion and applied optical flow - this provided a smoother playback
(I tried to optical flow on a clip of 1080/25 to 50% but reading stuttered slightly)
I just wanted to confirm if it is the best workflow for idling smoothly. Also when I tried to apply the optic flow on a second Motion 4 already 'optic flow"selected clip, but when I clicked on that nothing happened - I had to close out Motion and start over with the clip under a new name.
SMOOTH SLOW MOTION OF 60 P USING CINEMA TOOLS
http://library.CreativeCOW.NET/ross_shane/slow-motion_cinema-tools/1
-
I have an iPad 2 with 27 GB capacity, only 14 used. It has become very slow and some games like Yahtzee for friends is almost impossible to play. Is that what I can do to increase the speed?
Maybe you are looking for
-
Photos now launching on its own after installed EC
I finally took the plunge and installed at El Capitan. Among other oddities whenever I plug an iDevice on my iMac Photos lance now. There no option in the preferences of pictures Do not Sync. How to keep the pictures to launch? Back to Yosemite?
-
software for auto detect computer plug without driver
I have a desktop.and that I have not the cd of drivers supplied with it.i had it together 3 or 4 years back.i to install its driver vga and sound but don't know their model no.xxxxx... etc so how can I install my driver or can you suggest me some sof
-
Upgrade vista basic to Windows 7 and keep the WEP key
Hello. My current setup is windows Vista Basic and I have a WEP key on my pc, but have lost the hard copy. I want to move to W7, but do it by steps by going on Vista buisness then W7. Is there anyway I can make and keep my network settings, because i
-
All the troubleshooters NOT working and NO sound
Hello! I have several serious problems that I can't seem to get fixed. First of all my computer has been attacked by a virus on 10/11/14, but my anti-virus (paid Webroot) said it had removed and repaired everything. It happened because I have absolut
-
Hallo,1)I changed the name of a view VO criterion, but I'm not able to buld the project.Error: myapp.model.vo.MyVO: could not find the referenced object. Object =VC_OLD_NAME Owner = myapp.model.vo.MyVOBut if I look everywhere in the application I'm n