urgent! Upgrade ESX 3.5 and 4.0 - the console cannot be on a San?

Similar Questions

• recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails?

  recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails in windows mail that are and have it transferred to microsoft outlook?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrading ESX when you are connected to the SAN

  Hello. At the time, it was considered preferable to unplug the host SAN during installation or upgrading ESX fram. Is this still the case with ESXi 5.5?

  Hello

  In fact, it is always best practice to disconnect from the SAN, but you could do it on the fly as well using the Manager to update if your upgrade to ESXi ESXI 5.1 to 5.5. I have seen many do

  without any problem. Just make sure that the hardware is compatible in HCL.

  Thank you
  Avinash

• Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

  Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

  Have you already checked this discussion about this?

  The iPhone cannot be synced. An unknown error occurred (-50)

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Steps to upgrade to 4 Fusion and moving to the new computer

  Hey there. I could use some help with few steps so that I have if sure and get everything set up on my new computer, because I get conflicting information from friends of Apple.

  Currently I am running Fusion 3.1.1 on a late 2009 MacBook Pro with Snow Leopard. I have a virtual machine running a single stand-alone version of Windows 7 Home Premium 64 bit and a bunch of programs installed in Windows. I installed Fusion and Windows at the same time of the disks.

  I now move to a brand new MacBook Pro with Lion already installed. And I bought 4 Fusion on disk.

  My question is, which perform the steps I should follow to get Fusion 4/Windows 7 on my new MacBook Pro? I have to reinstall Windows on the new machine? Or can I somehow copied it to the Virtual Machine and have all come up with it?

  I'm a bit technical, but the new to all this stuff with.

  What I have read, I understand that I have to install Fusion and then copy the virtual machine over the old computer. Is this copy the complete Windows installation without that there is a problem with the registration number?

  Any help I can get will be more appreciated.

  Thank you! Linda

  From what I've read, I understand that I need to install Fusion and then copy the virtual machine over from the old computer. Does this copy the full Windows install without there being a problem with the registration number?
  

  Yes, it's exactly what you need to do. The exception is if you had installed Windows on a Boot Camp partition, you will not be able to copy on the virtual machine (since the data are on a separate partition and not in an easily copied file). For more security, keep your old configuration until you're sure the new works.

  Windows can decide whether he wants to reactivate, according to many variables that he considers. It is impossible to say whether it will be or not until you try. However, even if it does, it should be unique and should not be too much of a hassle.

• I get windows cannot verify the updates and error 80070424 and tried repeatedly the solutions suggest you and get always the same cannot verify the icon

  error 80070424 message and we tried all of the solutions you propose to the admin. tools and without success

  I suspect you got error 0 x 80070005 only because you don't raise invites http://www.vistax64.com/tutorials/181765-elevated-command-prompt.html
  Even if you are on the standard Vista admin account ever run the console administrator rights. To run the console with admin rights, it requires extra tip (details you have in above links)

  My suggestion: just run 'MS Fix it' KB971058 in aggressive mode - it can re-register all WU, modules of BITS and more... If you are lucky it is only conventional option it should solve your problem. If this does not resolve, go to Start > Search > services.msc
  and check below services exist, have correct parameters and work

  BITS : automatic (extended), began

  Windows Update : automatic (extended), began

  Windows Modules Installer : manual

  If you have an other parameters you have to fix it. If you can't change the setting or any service do not exist, you must fix a service (read below)
  http://www.Vistax64.com/tutorials/258701-Windows-Update-error-80070424-a.html

• Upgrading ESX 4.1 and 5.1 with UC VMServers

  I'm trying to find the documentation, guide or any details on this and have developed short on cisco.com and docwiki.cisco.com I hope that someone can point me in the right direction.

  To simplify my question let say, we have a current ESX 4.1 environment with VM servers running the following applications: CUCM, CUPS, CUC, UCCX. (does it matter if they are running 8.5/8.6 or 9.1?)

  If we were to move to ESX 4.1 to 5.1 What is the impact on the servers of Cisco? What are the procedures? Anything specific Cisco or a development warn that must be taken into account? And especially (can not find the answer to anywhere) we must redeploy the OVAs (from v7 to v8 to match) during and after the ESX upgrade?

  Any help would be greatly appreciated.

  Thank you!

  From:

  http://docwiki.Cisco.com/wiki/Unified_Communications_VMware_Requirements

  Correction and update of VMware vSphere, ESXi

  • In general, versions of Cisco Collaboration app mandate only the major and minor of ESXi versions they demand / support.
  • Guest OS support - Cisco's Collaboration applications that require a minimum Maintenance release (e.g. "5.1 U1' as minimum instead of"5.1"as minimum) for the application to be supported explicitly call this point on their product detailed pages.  When in doubt, consult Cisco Plan, design, implement (PDI) HelpDesk or Cisco TAC.
  • Supports hardware - version for a major/minor taken ESXi supported by Cisco's Collaboration applications, recommendation is to use the latest version of Maintenance which is also supported / recommended by the provider of servers (and storage if provider deployment to NAS/SAN).  To determine if a fix or a Maintenance of ESXi version "may" or "should" be deployed, follow the advice of these sources:

  • VMware Compatibility Guide (http://www.vmware.com/go/hcl) & nbsp; for the version taken major/minor ESXi supported by Cisco Collaboration vSphere.
  • Server hardware compatibility information to the supplier for the major/minor ESXi version required by Cisco Collaboration of vSphere.  For example, Cisco UCS, documents of compatibility to http://www.cisco.com/en/US/partner/products/ps10477/prod_technical_reference_list.htmlserver.

  Other "versions".

  • Version of VM (vmv) - the vmv represents the virtual hardware version. New versions of ESXi can increase the latest vmv, but ESXi versions always take care of the older versions of vmv (visit vmware.com for more information on the compatibility of the versions of vmv with ESXi versions). The "strict minimum" for Cisco's Collaboration applications is vmv4 and is usually transparent. Cisco-/ required files OVA will be for a particular version of vmv (e.g. OVAs for ESXi 5.x include vmv7 and vmv8). Unless is not a Cisco Collaboration application, customers are free to upgrade manually the vmv to a most recent vmv supported by the version of ESXi (click here for more details ).
  • File system VMFS (Virtual Machine) version - this is transparent to the applications of Cisco's Collaboration, but recommends using the latest version available for the major/minor version of VMware vSphere, ESXi, you deploy on.

  below that you have links to specific applications of version indicating compatibility with ESXi versions.

  HTH,

  Chris

• upgrading to windows 7 and lost bookmarks - the location/name of file would be under Vista so I can find it?

  I have upgraded from Vista to Windows 7 - Favorites IE installs fine but not the bookmarks of Fire Fox. What the name and the location was under Vista so I can search the hard drive for them. Yes I should have saved them but until it's too late for that now.

  They are stored in a file called places.sqlite in the profile folder. See http://kb.mozillazine.org/Profile_folder_-_Firefox for more details about the location of the profile folder

  The profile folder is normally hidden, make sure you have configured Windows to display the hidden files and folders.

• The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue. To upgrade to Windows 7, the computer must be running Windows Vista with Service Pack 1 (SP1) or later.

  I get this message when you try to upgrade to 7!  My computer is 100% in windows update update - please help!

  Hello

  What happens when you try to install SP1/SP2.

  Read through the material in the article...

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Notify us of any errors when you try to install the service pack.

  To know if SP1 is already installed

  • Click the button start , right click on computer and then click Properties.

    Check if Service Pack 1 is listed in the Windows edition section.

    Cheeeers...

    Erwin

• Manual upgrade with operating system and change in the architecture

  Hello
  
  I would like to describe a manual upgrade on Oracle [837570.1 ID] support, but I can't find information on the use of this method on the non-uniform type of OS, especially when the architecture is different. For example, is it possible to update as in metalink note, when the source database is Windows x 32 and target database is Linux x 64? Is there additional scripts or catupgrd this decision-making process?
  
  Best.

  If you have non-uniform platforms then you can install the desired version of Oracle on the new server and use import/export to transfer data. This works well enough for any combination of platform as long as versions of Oracle are not too far apart.

  The transportable tablespace option can work if the databases are two 10 g + with rman endian conversion.

  Here are two notes of Oracle support on this issue:

  Migration of Oracle database on platforms OS 733205.1 Instances

  Compatibility for Exp & Imp Btwn Diff Oracle worm matrix: 132904.1

  HTH - Mark D Powell.

• This system is eligible for the lower upgrade Windows 7 Pro and what is the process to do this?

  Inspiron 15z 5523 Ultrabook comes with Windows 8 Pro, who, to my knowledge, has right to downgrade to Windows 7 Pro.

  http://Configure.us.Dell.com/Dellstore/config.aspx?OC=si15z5p02&model_id=Inspiron-15z-5523&c=us&l=en&s=BSD&CS=04

  http://www.Dell.com/us/business/p/Inspiron-15z-5523/PD

  I am someone help choose a laptop and want to know the process before they buy. This system is eligible for a downgrade?

  If so, what is the exact process to complete the process? If not, why not? It comes with Windows 8 Pro. How can I get the Windows 7 Pro installation media? How can I get the Windows 8 Pro installation media?

  Hi redlosen,

  Please send me a private Message after receiving the system. I'll ship you media from Windows 7 Professional. We should not have a product key will appear an OEM version.

  To send me a private Message, click on my user name, then click on start Conversation.

• I've recently upgraded to Office 2016 and also got the latest version of Acrobat Pro, but the Acrobat option does not appear in the Office components. How to make this work?

  I own Acrobat Pro and downloaded the latest version. I also improved my 2016 from office to office, but the Acrobat option does not appear in the Office components like previously in 2013 office. How can I get that back? I often secret several worksheets in PDF format and it is tedious to print them one at a time and then combine. I used to be able to select all the worksheets I wanted and combine them in one go.

  Hi steverobb,

  Acrobat XI is not compatible with Office 2016 for the moment. Please wait for future updates.

  Kind regards
  Nicos

• icons and folders on the desktop cannot be moved

  I just installed Security Update 2016-001. When the computer rebooted all my folders on the desktop and icons have been in different places and I can't move them on the desktop. I can click and drag, but when I drop back to where they were

  Please, do a right-click on desktop & choose since none.

  Also, be sure that all applications are closed before performing the above step.

• I'm trying to delete a file and I get the message cannot delete file: cannot read the source file or disc HOW DO I GET RID OF THE FILE?

  There is an icon on my desktop I want to remove

  Tskilonger,

  Welcome to the Microsoft Answers community.

  Try to delete the file in safe mode:

  To use a boot option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  2. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  3 when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.