USB charging question

Similar Questions

• Car USB charger question

  Bought a charger car Macally, model USBCIG2, that lists all compatible iPod and iPhone models.  My question is that will work with my Clip charger, it is standard 5v usb output.

  MacAlly also has a model for Sansa, but good luck to find in a store.

  I searched on this site, but almost all are related to 120v Chargers, and I hope that someone knows this model and will know if he's out standard usb.

  Thanks, Mike

  I think that all shippers output USB 5v, +/-.25v.  The question would be the output amperage.  The USBCIG2 supports the iPhone, I've read elsewhere takes 1a for loading, that would be perfect for the Clip.  I used a 750mA both a 1 charger with my Clip, and both work very well.

  But you can contact Macally technical support to confirm this (and your first response will probably tell you to buy the Sansa model instead ).

• Where to buy an additional USB charge cords 8 5901 wake model

  It seems that USB charging cable is specialized for 8 5901 data flow model that I have... is this true or can I use any USB cable with the mini jack into the design?

  If I have to use a special cable, where on the website of HP can buy one?

  Thank you...

  Hello

  There stanadrd 'type Micro USB 2.0 w/charger B:

  http://support.HP.com/au-en/document/c04497977

  This means yes, micro USB cable normal standard will suffice. You can buy it at any good computer/phone-shop or store from $ 5 to $ 15.

  Kind regards.

• E5 - 474G Force USB charging port

  I just bought Aspire E5 - 474G laptop. It is said in the brochure that she has turned off of the features of USB charging port, but she did not mention which took port support the feature.

  Also, I can't find a manual to the user appropriate (either on paper or online). The only thing I could find is on Windows 10.

  Take a close look at your USB ports, you will notice a small logo of battery USB on one side, it is the port of loading.

  

• USB - Charge only

  Is it the posibility to have an option when connected the phone to PC / laptop via a USB cable for the option "Charge only" as the HTC phones had?

  Most of us charge our phones at work using the PC / laptop USB ports and while it is the corporate network I feel somewhat uncomfortable on my data are exposed to Admins who have a remote access to computers of the company...

  You could try to buy one of these USB cables with magnetic connector that fits on the two power pins exposed on the left side of the body of the Z3.   Simply plug the USB connector into a USB port available on your laptop or use USB charger provided with your phone.  I like this approach to charging because it eliminates having to open the cover to access the mini USB port on the phone.

  

  

  I hope you find this useful suggestion.

  See you soon,.

  Alan

• BlackBerry smartphones turn off USB charging

  Hello

  Is it possible to disable the USB charging? I usually have my bb plugged into the usb cable and I don't want my bb always charged. Maybe a procedure such as turn on/off the USB Charge.

  Kind regards

  Andy

  No, there is not.

  And there is nothing wrong with that in charge, even constantly.

• BlackBerry Storm 9500 Blackberry Smartphones - USB charge the question and problem of missed calls log

  Dear all,

  first of all Hello to everyone and that being said, I * fact * search both Google in general as well as this forum, in particular, prompt even to Vodafone was not any help, here I am, stuck with 2 problems with my BB Storm 9500 (.141 firmware, user of BES, Vodafone Germany) and it drives me crazy. Maybe someone here can help me.

  1. is it possible to load the storm via a USB cable connected to a computer * without * be disconnected from the network?

  Forcing me carry the charger around like a heavy phone (while previous models of BB) user authorized to charge by computer/USB without being offline.

  2. What can I do to see the missed calls in my call log?

  For the moment, I don't have the option to log in the missed calls message window, but to see them I have to unlock the storm via password I try * very * inconvenient (btw, the option to view missed calls directly in the call log was yet another function available with earlier models of BB).

  Any help or advice greatly appreciated!

  Concerning

  Jack

  Hi all

  It turns out that everything reported were caused by a screwed up political IT... that being resolved, everything works like a charm...

  THX once again all for your support and advice.

  Concerning

  Jack

• USB charger - 29W C - compatibility with 12.9 "iPad Pro

  I'm looking for an answer as to if the USB - C 29W charger is compatible with the iPad to 12.9 "Pro. I know this question has been asked and answered by the communities in the past, but when I went to the Apple Store to buy the charger today, the staff told me that the charger could damage my battery over time. I then started a support chat session to confirm the answer and the representative said (and I quote) "If 2 people advised me not to do something, I would not even waste my time." We could care less if you want to damage your unit. »

  First of all, I never got a rude responses to Apple, so it was a surprise. Secondly, I really just trying to get an answer to the question. Can anyone (especially Apple) help out me? Thank you!

  If it is not in the specs of the iPad, you're crazy to use it. The Chargers are cheap, the iPad is not.

  Barry

• Where can I buy a USB charger that synchronizes / transfers songs for this...?

  I lost my usb cable and bought an accessory Pack off Amazon, which included one but it does not charge, it does not transfer to songs!  I don't know if it was question of cable or if it is problem of the Zip Clip so I wanted to ask here b/c it's so frustrating.  I was looking on Amazon which seemed pretty cheap micro usb cables, but I don't want to buy it and then realize that it is not able to sync/transfer.

  Does anyone know if something like that might work?  Thanks in advance.

  http://www.Amazon.com/GP/product/B002HMWQE2/ref=pd_lpo_k2_dp_sr_2?pf_rd_p=486539851&pf_rd_s=Lpo-top-...

  Or, how about $1.29, including shipping, for a cable 1 '?

  http://www.Meritline.com/1-foot-USB-a-to-micro-USB-m-m-data-cable-for-cell-phones---p-59661.aspx

  Or, $1.49 including shipping for a 3.3 cable'?

  http://www.Meritline.com/3-3-feet-USB-a-to-micro-USB-data-cable-for-cell-phones-charge-cell-phone-on...

  Meritline has some great prices (I've never understood how his super low prices, as that above, can include navigation - the price of broadcasting a simple one letter from the United States in Hong Kong is $ 1.05!) and its products are very good in general; got some nice deals there.  Note: most items ship to Hong Kong or Singapore. shipping to the United States usually takes 1-1/2 to 2 weeks or more.

• HP Pavilion Notebook 15-p119: USB charge, but does not sync devices

  Dear folk to HP support,

  I have a situation very similar to the mentioned in this thread, the only difference is my OS: http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/VGA-and-USB-Driver-Not-Working/m-...

  With any device (iPad, Samsung Galaxy, FIIO x 1), if I plug it into my laptop the device starts to load, but is not synchronized and I can't access or transfer data between the laptop and the device.

  I tried to disable the drivers and their reset. I tried to reset hard devices. None of these help.

  This laptop came with pre-installed Windows 8.1. I have it wiped and now have a manually installed Windows 10 (64-bit). I have difficulties to find specific drivers. I used the HP support assistant and he tells me that everything is up to date. Windows tells me as the drivers are up to date, but I wonder if the drivers are generic and not specific to this laptop.

  Where I find a better driver? Or are there other solutions?

  Thanks in advance.

  Hi @mrawjm,
  
  Welcome to the HP Forums!

  I read that you are having problems with the HP Pavilion 15 - p119 Notebook and recognize a USB device. Here is a link to solve the USB connections.

  I would like to uninstall all listed in the universal serial bus controllers list.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  Please let me know how it goes.

  Please click the thumbs upwards below thanking me for trying to help!

  Thank you.

• WANT 750se: USB charging port

  I have a HP 750-100se ENVY. The Office has 4 ports USB at the back and 4 top / front, a total of 4 ports USB 3.0 divided 50-50. USB 3.0, two albums identified by an SS has a Flash to identify it. It is my understanding that the "BOLD" lightning USB port can also serve as a fast charger for my mobile phone. I have a Samsung Galaxy S6, has the ability to use a fast charger. I used both the cable that came with my phone, and the other bought separately from Verizon, both are fast charge cables. Nor can charge my phone to anywhere near a normal cable, my phone says a full charge of 30% would take more than 4 hours.
  
  Is their no way to "activate" the bolt of lightning port USB is able to load quickly?

  BlueHawk172, welcome to the forum.

  All the information I found on the USB port with a bolt of lightning indicates that it can be used while the computer is turned off.  However, I have not found any information indicating it is a fast charge port.  It seems to load at normal speed.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 300-1017 ports USB/charge

  Hello, I have a 300-1017. I recently got a device that I need to load, it has settings of 100mA and load 500mah. Where can I find the info about whether if my ports of computers are able to load at 500 mah. Thanks in advance.

  Hello

  Many machines have ports that can charge other devices when not in use. The following link shows the specifications of your machine:

  HP TouchSmart 300-1017 desktop PC

  It contains only standard USB ports.

  Kind regards.

• USB charge off the computer while

  My computer, an HP Envy 700-200Z, windows 8.1, (a USB 2 and 3) won't let me charge USB devices when the computer is turned off. The device's headphones HP (next to the tip).

  It's really useful to be able to load a wile device that the comp. is disabled.

  I tried through the Device Manager (the options allowing the computer to power off are not checked) does not.

  Is there anyway that I can get the computer to charge USB devices when it is off?

  Help really appreciated.

  Hello

  Power to the USB ports when the PC is in a shutdown state is a function of the motherboard and BIOS. It is not a driver of operating system problem.

  If you use the default BIOS settings and you do not get power USB with PC is off and your PC does not support this feature.

  I have this function of USB power on some of my PC, and it's a change in BIOS setting to disable.

• USB charging

  Hello

  I just bought HP stream 7 Tablet.   IAM able to charge the Tablet via usb power cable but I am not able to load via cable sb via laptop. Could you please check and let me know if this is expected behaviour or problem?

  Yes, a USB port provides only about 1 amp, which is sufficient to display the indicator of State of charge on the screen of the Stream for about 6 to 8 seconds when plugged in for the first time, (The Stream must be turned off before it appears).  The USB port does not provide enough power to show that the Tablet is supported in Windows.  It will always load it slowly however, and you'll see the percentage of battery charge increase slowly if there is not much to be able to consume the output of the activity on the tablet.  The adapter provides about 2 amps simply specify the Tablet is supported in Windows and it will load faster.

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.