USB devices not seen on Satellite Pro A60

Similar Questions

• USB does not work on Satellite Pro L10

  Hi all

  my experience with the USB on my L10 connections were more confused, once stopped working however, never worked again...

  My two connectors on the left stopped working origionally (so-called peripheral usb not rec, the other thing that happens) when I noticed one on the back (usb2 I think) who worked for a minute then don't work more just like that! It is quite new and I have disabled the backup thing energy in properties. the device, I've tried to use is a microsoft mouse. Hmmm... come on toshiba.
  concerning
  dazza_p.

  [Edited by: admin on 22 July 05 18:05]

  Hello

  My experience is that USB port may stop working, but after phone restart works again. You can also try to remove the USB ports in the Device Manager, and after the scan for new hardware. The ports will be recognized and installed again.

  If there is no possible change hardware malfunction and you should contact the Service partner. I guess the unit is fairly new and warranty will cover all repair costs.

  Good bye

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• Re: Satellite Pro A60 - PCMCIA WLAN card does not question CardBus

  I received an A60 to upgrade for a friend and one of the necessary things is a wireless card.

  I got a 32-bit cardbus card but when I insert into the laptop, nothing happens. XP does not recognize, the oo lights do not come on the map.
  First I thought it was a faulty card but I tried other cards and get the same results and I reinstalled XP and all the drivers but nothing.

  I've seen other messages on the change of the mode in the BIOS, but there is no mention of the CardBus in the BIOS.
  The laptop uses the BIOS version 1.9. I just want to check is there something escapes me or the CardBus location just does not work?

  Hello

  Satellite Pro A60 was equipped with the 32-bit and 16-bit PCMCIA slot that supports PCMCIA card * Type-II * only!

  Have you used the * PCMCIA Type-II card?

  Perhaps you have used is not compatible PCMCIA card, you should check this first!

• Satellite Pro A60: Is it possible to boot from USB to use Backtrack 3 USB

  I have a Satellite Pro a60 and I was woundering if anyone knew how I can boot from the USB to use Backtrack 3 USB Live?

  Hello

  It is not possible to boot from the USB key. Only the start of the ODD, the HARD drives, the LAN and USB FDD (ie. diskette bootable) is possible.

  Best regards

• Satellite Pro A60 do not read CD

  Satellite Pro A60 - EN, reader of CD/DVD-RW reading high. Up til now read audio CDs, DVD video & MP3. Now stopped reading CD - R that were created elsewhere, two photo/word files and now MP3 does not read. Once stopped play CD audio Middle ripping today. Restarts the computer after the error report microsoft and fact then automatically have stopped ripping today.

  Laser seems clean, car not clear, no virus.

  Natrually outdated... warranty...

  Welcome pointers

  Hello

  Have you tried to remove the drive from Device Manager?
  Try this procedure. After restarting the OS should recognize the drive again.
  Maybe this will solve the problem.

  Good bye

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite Pro A60 USB TV tuner

  Does anyone know of a USB TV Tuner (PAL) who will work with a laptop Toshiba Satellite Pro A60 with integrated ATI graphics card?
  I tried 2 so far, Pinnacle PCTV and Compro Videomate Action, neither worked.
  The problem seems to be with the graphics processor ATI IGP

  Hello

  have you checked www.hauppauge.com?

  They're also good tuners TV, but please ask a Tech support guy. If there are problems with the ATI 7000 IGP chipset!

  Good bye

• Satellite Pro A60 does not illuminate

  When I try to boot my Toshiba Satellite Pro A60, seems to be powered. A few seconds later, there is a click and it cuts.

  I tried to turn on the computer with just the power supply with the battery removed, just with no power supply and battery and power, but none of these options are making a difference.

  I also tried to clean the fan in the aspirant from the outside by a suction pipe, but even once, it did not help.
  Can help you with the Please this problem?
  Thank you.

  Hello

  Turn the laptop over and unscrew the cover on the ram. Then remove the ram and try to turn it on again. If it lights, put the piston inside the laptop and try again. It does not turn on? Then your ram is dead. If yes then you can replace, or have your asp replace it. If this does not resolve the problem, there is a small plastic cover that runs along the keyboard just above the keyboard. Take this off and then unscrew the fixing screws to the bottom of the keyboard. Under the keyboard, you may have a second RAM slot. If Yes, try to remove the RAM stick and turn. It work? If this isn't the case, you probably have a problem with the motherboard. If it lights fine, then you have found the issue and can replace or continue using it without the extra RAM. Hope this helps and have a nice day.

• Module of RAM not recognized on my Satellite Pro A60

  Hello
  I have a Satellite Pro A60 and recently bought a RAM of 512 MB memory upgrade.
  I have fitted on the correct port, however, there does not appear to be be achnoledged as being there.
  Can someone help me?

  [Edited by: admin August 31 05 19:02]

  Hi Robert,.

  I guess your A60 has two RAM ports, then I suggest that Exchange you the two RAM modules autour to check if the port rather than the modules itself that is the source of the problem.

  I hope that you took of anti-static precautions before manipulating the new RAM module. They are easily damaged by a discharge of static electricity.

  HTH

• Satellite Pro A60 does not recognize DVD-R blank disc

  Can anyone help?

  I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

  Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

  I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

  Help, please!

  Thank you

  Hello

  What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

  Can you please explain this a little more carefully?

  Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.

• During BIOS update by Satellite Pro A60 went down and did not start

  Hi all

  I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

  Tried to start with (~) key pressed (a tip I received from a friend), but without success.

  I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

  Does anyone know how to fix this? Any help would be greatly appreciated.

  Thank you

  This doesn't sound good.
  If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
  Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

  In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
  To avoid such damage and mistakes, Toshiba published FAQ document.
  How to upgrade the BIOS on most of the units!

  That you should read before making updates to the BIOS!
  Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

• Satellite Pro A60 does not supply power to the top

  Hello

  I have a Satellite Pro A60 and when I turn on the machine, the lights come on and the fan whirls for about 5 seconds and then the machine just turns off again.

  No matter if I have the battery or HARD drive in or not, the same phenomenon occurs.
  I guess it's problem of CPU or power supply Board, but I don't know.
  Is there anyone else who has had this problem and if so how is it resolved?

  Any help would be appreciated very with gratitude that I am out of warranty and need the laptop when you work from home.

  Thank you

  Hello

  I guess it can be a single processor or card mother related issue.
  If there is something wrong with the power supply for laptop card then the cell phone would not turn on, even for 5 sec.

  But it's only my personal suggestion to make sure what's exactly wrong check specifications should be necessary.

  So I think that a laptop computer technician should check it out.

  Good bye

• Satellite Pro A60: Screen does not

  I used my Satellite Pro A60 yesterday and everything was fine, I tried to use it today and the screen lights it is just white... Please can someone help I am lost without her, the blue light comes on, but nothing on the screen please help.

  [Edited by: admin on 3 July 05 13:22]

  Hello

  you see the Toshiba logo red when it starts or a screen empty?
  Toshiba logo: so you have a software failure, and you should backup your data and do a restore
  White screen: while there must be a problem with your hardware! Contact a Service partner and he will repair under warranty!

  Good bye

• Satellite Pro A60 does not

  When I start my Satellite Pro A60 I get the Toshiba screen, then it goes to a white screen and nothing else happens. I tried to remove the battery, disconnect it from the socket without success.

  I turned on the laptop and you press F12, but nothing happens, occasionally strange after the Toshiba screen, there will be a black screen with the words "Checking boot CD-rom" in the upper left corner and then nothing happens.

  Does anyone have any suggestions? If so could you please email me at [email protected]
  Thank you

  Hello

  Check please if the HARD drive is recognized correctly. Enter the BIOS settings and see if the HARD drive is listed there.

  You can also try to set the BIOS to the default settings and try using recovery media to see if the recovery procedure starts correctly (if the HARD drive is recognized properly).