USB dongles wireless works only on Windows 7.

Similar Questions

• G70-111EM - wireless works only with Windows 7 Professional

  Dear users,

  After 1002 in the factory reset error and not be able to solve this problem. I decided to buy Windows 7 and install it on my laptop, G70-111EM.

  The problem I have now is that I can not can not to wireless internet with.  Wired LAN connection works fine.

  When I press the wireless BUTTON next to the POWER ON BUTTON Wireless market (normally lights up BLUE) OFF wireless connection (normally turns orange).  His watch currently AMBER when I keep it pressed it turns BLUE but after a few seconds goes back to amber.

  All the drivers are installed and control panel shows no conflicts.

  1 has anyone had this same problem.

  2. How can I check what the current wireless hardware I have in the laptop.

  3. If someone can help me with how to know the details of the hardware I can try and find the right driver for this hardware.

  4. I'm going tonight know the name of the driver that is currently installed as part of installing windows 7.

  AMBER LIGHT ON THE LAPTOP FOR WIRELESS

  

  INFORMATION ABOUT WINDOWS AFTER TRYING TO REPAIR

  

  ATTENTION: the download of the software/following links are only for laptop HP G70-111EM! You can find the download appropriate for your specific laptop here: LINK

  I am sure that I have the solution for you! And I'm quite depressed by the inability of HP, its employees and support their policy update

  So, there are some steps to follow, to get your Wlan rerun. To be exact: you could 'fix' in one step! But please use my complete guide, step by step! So here go us:

  1. first of all, you must use the latest version of the Bios (January 2011): update of the HP Bios

  2 run 'Windows 7 Mobility Center' by pressing the 'Windows key + X' or via your control panel (HowTo).

  3 here you can see a section 'Wireless Network '. Can you turn it on, by clicking on the button? Or is it greyed out and disabled? -Let me guess: you can not click on the button, it is grayed out? ...   Because I am sure that you could not improve the situation with previous measures, let's go on.

  4. download the HP Quick Launch Buttons for your laptop and install it.

  5 restart.

  6 always: any improvements to date? (I guess: no!)

  7 as a next step, download the HP Wireless Assistant and install it.

  8 restart.

  9 now the most important step - revive us your wireless network: click on "Start" (Windows logo), enter "assistant wireless" in the search field and select Assistant HP wireless list.

  10 upward and running, you should see your device wlan under "wireless devices installed:

  

  Click on 'Properties' and you will see ~ 4 boxes that you can check/Enable. One box ISC 'independent controls for wireless devices. Make sure that this box has a tick inside and click on apply, then when you return to the wireless assistant there should be a box that says "light" click here and my wireless turned blue immediately. However...

  11. .. . If the "Turn On" button is grayed out (yet), you have just to press the orange-light-without wire-hardware button on your laptop once. After a few seconds, the color of the 'Activate' button should change its color and you should now be able to click on it!

  I have it?

  I have this problem, too. My laptop (Presario CQ-60) HP has also incorporated this Atheros wireless card.

  

  Try almost everything that I'm still not able to reproduce the situation that suddenly off the wireless card.

  I suspect the energy options of Windows to disable the wireless card, but I'm not sure. That's why I disabled all options regarding the WLAN to save energy. This means that in advanced of ALL power management options you have prevent energy saving on the network WiFi Windows and in Device Manager stop driver wireless in its properties to disable the card in order to save energy. Here is a step by step guide:

  

  Once again: I don't know if this can help. So give it a try.

  Aside from that is not a real solution, it is only a workaround. Hewlett-Packard could not help me either, they just sent me a new wireless card. In addition they me too (as mentioned above), to reactivate the wlan module in the Bios - BUT here the same power options: there is no such option cause they cut down the Bios extremely * argh * that makes me angry!

  For ME, it is clear as mud: there is a serious bug! Whether it's a Bios, OS, wireless card/hardware or a driver/software problem is hard to say. But proposals to uninstall and reinstall the driver of a news/other/more late/old/whatever are worthless. It seems that a command indicates to the wireless card to turn off completely. And a new driver, or a restart, Windows Mobility Center or a handstand can revive - only the HP Wireless Assistant (and a complete new installation of Windows 7 for as far as I remember)!

  Interesting is also that if you turn service wireless using Windows (Windows key + X) Mobility Center, can't revive using the HP wireless Assistant, but only with the Microsoft tool. And as we have seen it is the same vice versa. But why? It's so absurd and unnecessary complicated. In fact, I never had installed HP Wireless Assistant under Windows 7. Therefore whenever this occurs, install the HP Wizard to get rid of this annoying bug. But I don't want to have this additional and unnecessary software on my PC.

  In addition: the bug persists.

  Hewlett-Packard, it's your turn!

  PS: I'm done with Microsofts Atheros function of the window update driver. In my case it connects faster than any other driver found on the internet (I also tested those on the Czech Atheros unofficial site)...

  PPS: Hope I could help

• USB Bluetooth adapter works only on windows 8

  Hi, I have a PC running windows 8. My hama-USB Bluetooth adapter does not work. I mean, I have it plugged in, the drivers have been installed automatically, I even installed the drivers on the disk. The bluetooth adapter is displayed in my devices, but I can't use it at all, if I am looking for bluetooth, it shows me nothing useful.

  Thank you very much

  Philippe

  Hi, I also had the same problem. Found the solution by downloading and installing "Bluetooth Stack for Windows by Toshiba" of

  http://support.Toshiba.com/support/viewContentDetail?ContentId=3461138

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Driver of DCR - TRV340E USB works only on windows 7?

  bought the DCR-TRV340E years, pilot has worked on the windows xp I had on old computer...

  tried to upload videos to new laptop (HP Pavilion dv6)

  think not that the driver works, do not recognize the USB

  the camcorder is compatible with windows 7?
  (it says it's on the site... but can't make it work...)

  any ideas?

  does anyone else have this problem?

  BTW, I bought the unit in Australia.

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• HP DV6768se Mini Remote works only on Windows 7!

  Just like the title says, my mini remote control won't work for nothing, I have windows 7 ultimate. I have the ENE CIR Receiver driver installed (41645) and with this driver, the only thing that works is the button to switch to the external display. I tried to change the battery twice (was a 2 Pack of brand new) still nothing. I even tried to change a new driver ENE CIR driver (44983) which is supposed to be for windows 7.but with this driver even not that external display button will work. This remote was working find on windows vista (but everything still sucked him )

  For your model, all you need to do is to install Quick Launch Button software, CIR driver comes into it.

  Uninstall the current ENE CIR driver, and install software QLB, Win7 Upgrade guide, here, your laptop is in level 2.

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• Simple pass works only on Windows 7 pro standard user

  I looked through countless questions simple pass and found no clue.

  I'm used to simple passage, recognizing the need for a u/p that it registers the new website or offers for me to slide my finger for an existing installation.  This is nothing.  It is runing as I see in taskman.

  Recently, I've reconfigured my logon as a standard user.  I can't see exactly that as a starting point, but that is the only change that I can remember.

  Product number: A5F92AV Windows 7 Professional 64-bit Service Pack 1

  simple pass 6.0.100.276

  Jess,

  I might suggest that the account on the other is the fix.  The idea of alternative / new account was first suggested 06/11/2013 and now once again in Lil_Lisa27 (thank you, Lisa!).  Everything you've tried, it's the only solution that has accomplished the goal: get SimplePass working on your Windows 7 operating system.

  You can use the transfer tool to move account data or you can simply move to the new account, and then set the ownership and permissions.

  You can also continue to seek a solution based on the knowledge that it was discovered the underlying problem to the environment into account in this particular account.  Once you have your new account to work the way you want, you can certainly leave the account 'broken' in the system and continue to push what you think of new things to try to fix the SimplePass database.

  Be sure to create a Restore Point before you make changes to the program or anything outside your account.

  Good luck!

• LaserJet 2600n: LJ 2600n works only on Windows 10

  I have a LaserJet 2600n on my network of small working groups.  I have recently upgraded to Windows Pro 10 x 64.  I had not used the printer for a while on my old system Windows 7 Ultimate so he did not appear in the update to win 10.  I'm doing work on the system Windows 10 and frankly, I'm really having a major problem.

  I couldn't get my system to even see the printer in a first time, then I changed the IP from automatic to manual and set to a free IP known IP address and also verified that the gateway was correct by looking at an another settings printers.  I was not able to get windows to even find the printer.  I know that it is on the network, and it's on the same sub-group because I can ping.

  I got the printer assigned to a new TCP/IP port that I created, but for some reason strange Windows insists that the printer is offline.

  Can someone tell me please on how to get this printer to be recognized on Windows 10?

  BTW, to add more pain to the mix, I also have a LaserJet 2840 I have to add to the system.  I won't even try until I get the 2600n run because I'm sure I'll have the same problems.

  Thanks for any help.

  L

  You say that the printer appears but is offline.  Have you gone in the properties of the printer (first properties) and click on I think preferences and it should be the engine and see if you can click to edit or update the driver and see if it can find a new driver.  This printer uses what is called ready jet that requires the software on the computer because the printer does not have a processor.  From what I've seen on the site of hp, the printer software is supposed to be built into windows 10 since no drive is listed on the site.  Here is a link to the software for usb connection that hp had for windows 8.  It can run on windows 10 machine which can then enable usb printing and if it works then under usb, you might be able to change the port on the local tcp/ip port.  Good luck.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=445987&swItemId=ly_49626_5&swEnvOid=4132

• Flash player works only with windows 8 RT

  Sites that require Flash Player do not work on my Windows 8 RT device, even if the latest Version of Flash is installed.

  IE10 on Windows RT supports Flash only for sites that are in the so-called list of cv. That of why it works on Youtube, but not on other sites.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?