USB not seen in XP mode window

Similar Questions

• Peripheral USB not seen - sort of

  I just installed a hard drive in a container external via USB.  I also have some other devices, such as MyPassport, mouse, keyboard and so on.

  The Control Panel recognizes the container and the disc "devices and printers".

  Why I try to locate externally with 'computer', I see my two MyPassport, but not the external USB devices.

  What I've done wrong, or how can I "fix" something?

  Thank you.

  It is not particularly difficult.  The general problem with external hard drives is that they end by moving and sometimes shaken, dropped or struck in a certain way.  Internally, these are quite delicate things.

  2.5 type "are much more delicate than the 3.5" those who are about 20 times the mass.  2.5 type disks "are much more likely to fail.

  Heat can be a major problem, according to the design of the external enclosure.  In general, very few are designed to be left turned on for more than 2 hours before they heat up too.  The heat is the greatest destroyer of all electronic components.

  You say that you have installed the reader in housing.  Be sure that it is firmly in place.

  If for some reason, the drive you have installed has become corrupted, and happens often, as I have described, it is highly unlikely that you will retrieve data from it.  However, the only hope you have is to save the hard drive, you have used physical and make usable again.

  According to your description, Windows on your computer can detect your external drive housing but may or many do not detect that there is a disc inside.  You can confirm that Windows detects the drive case, you describe AND be able to detect that there is a disc inside by following the instructions in my previous post.

  1. Right click on computer, select manage.
  2. Disk management
  3. Find your new drive

  If you do not see your drive listed there, the drive itself has failed and it is essentially waste.

  IF you do not see your drive that there are listed, you have confirmed the theory and must now:

  1. Right-click on the open space that is not initialized
  2. Choose the option that is shaped and initializes the volume

  Assuming that you can re - initialize and format the hard drive, your next step is to download and run the test software by the hard drive manufacturer to determine if the drive itself is a failure.  I can give you a link to download the correct software if you will provide a model number of the drive - print on the label on the disc.

• USB ports no-opperational in the Windows 7 environment, does not start mode command line safe

  Quick description: experienced difficulty trying to reformat a HD problem. It has been suggested that I have download the diagnosis of the manufacturer. Did. Restarted the computer as required to run the new program. After reboot, no USB port work Windows. Considering that all my USB inputs, it is extremely annoying. Input devices still work on other computers and still work during the start upward (before windows), also does not open in safe mode with the command prompt.

  I tried to reformat a LaCie HD that was previously used for a Mac for PC usage. Gave me a code 43 error and a problem code: 0000002B. Had a bad"block" in the HD somewhere read that I should try to use the manufacturer diagnostic tools to check the HD on.» Downloaded the "LaCie Update Tool" and installed it. It took a reboot. After the reboot, any USB devices worked. (Will begin another thread on the HD as soon as I have this problem.)

  Tried to restart in Mode without failure. Then the Safe Mode with the command of the DVD prompt. (However, I'm not 100% sure that I'm loading from the DVD, I couldn't find a good answer on how to do something so basic.) Always seems to load in the window 7 - always end upwards the newspaper account on screen - certainly no command prompt.

  The keyboard and mouse work on other systems and the keyboard works fine before the Windows 7 screen (the selection of mode that starts in) so I'm pretty sure that it is a Windows 7 problem. Can't really get in the error codes that I can't enter anything now or move the cursor at all. (I'll try to borrow a non-USB keyboard and mouse).

  After a reboot when it asks me what I want to start the computer in safe mode or normal windows 7, loading the drivers, it stops at:

  \windows\system32\DRIVERS\CLASSPNP. SYS

  I don't know if this is normal or the system stuck.

  I tried a manual reset of the motherboard and deleted manually the CMOS on the motherboard did not help - but don't expect really.

  I think I need to run a disk check / fix from the command prompt, but I can't even at the command prompt to the top.

  Thanks to anyone who takes the time to answer, a lot of satisfaction in advance.

  My system:

  Windows 7 64 bit

  ADM Phenom 955 Black Edition Quad

  ASUS 890FXA-UD5

  Microsoft USB wireless keyboard and mouse

  Less relevant stuff: ADATA DDR3 1600 G XPG 2 X 2 GB, Sapphire Radeon 4670 1 GB, Western Digital Caviar Black 640 GB HD, ASUS DVD/CD drive (DRW 24B1st) Corsair TX 750 W

  The Repair Mode command prompt supports USB devices. Here is how you get there:

  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. Select repair when prompted.
  5. Select the keyboard language when you are prompted.
  6. When you are prompted, select command prompt.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  The process described above is independent of everything that is on your hard drive. If your USB devices still do not work then you probably have a motherboard problem. If it is a desktop computer then you could by a 4 port USB card.

  If you get an account and password for the boot process then you dΘmarrez not from the CD/DVD. I've seen a number of messages in which people reported that they were unable to boot from the CD/DVD drive. Here are the most common reasons for these failures:
  -L' poster neglected the prompt to press a key to boot from the CD/DVD drive.
  -The CD/DVD boot was not a boot disk or was damaged. Use it on another machine has confirmed this.
  -Some BIOS setting was incorrect. Start with some other boot CD/DVD (for example here: http://pogostick.net/~pnh/ntpasswd/) confirmed it.
  -The CD/DVD drive has been damaged or is unable to boot from a boot CD or DVD.
  -The machine has a hardware problem (for example, a motherboard problem) which prevents start in any mode.

• To connect to the PC - tab 8W - not seen when connected via USB - Help!

  My new 8W tab is not seen by the PC connected via USB. Both are Windows 10. Help!

  Out of curiosity I will pick up an OTG cable and let you know the result!

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Thunderbird is stuck does not. even in safe mode. (win7) SOLVED by disabling Windows prefetch and superfetch services

  Thunderbird is stuck in the mode "not responding". I tried various fixes suggested on the web, such as restarting in safe mode, using Thunderfix and except on records of Thunderbird to antivirus scans, but nothing works. FYI, my antivirus is Norton Internet Security. I hope someone can help. Thank you.

  You could take a little further...

  Please start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
  -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• USB not recognized on Windows 7

  Hello
  I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
  PLS, can you help me to solve this problem?

  Hello

  What model of laptop do you have?
  On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

  In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

• A satellite - DVD Drive not seen by Windows Explorer

  The DVD on D deive is not seen by windows Explorer. Used to work, it has now disappeared. The dvd hardwars starts at the start, then stop.

  Any ideas anyone?

  Hello

  You see the DVD drive in Device Manager and you then yellow exclamation points?
  Maybe you should just remove the drive from Device Manager and reboot the laptop. Select the drive in the Device Manager, right-click on it and choose uninstall. Then, restart the laptop.

  If it doesn't work try the workaround posted by Akuma to remove upper and lower filters.

  Good bye

• 'office' in windows live not seen feature

  create a link to a onenote file that is created.  Mobile 6.1 will sail to windows live, but the "Desktop" option is not seen. Photos, e-mail can be viewed.  Why is access to office live web apps denied?

  You will find in favor of Office Web Apps (Live) in this forum: http://social.answers.microsoft.com/Forums/en-US/officewebapps/threads

  You can find support for the installation/upgrade to Windows Live Essentials 2011 in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp does not boot in any mode

  I still can't find info on windows xp does not start in any mode.  Keep the loop on the screen where it has the Safe Mode, Safe Mode with network, last Configuration know, etc.  Any solution?  I appreciate your time.

  Do you have household XP No Boot Troubleshooting as stated in the post sticky at the top of the forums?

  They were practically useless, I'm happy that they were taking him down.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until: _.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• Windows XP Professional does not work in normal mode. I can't find my Windows CD to repair it but. What are my options?

  Windows xp pro does not work in normal mode.  I can make it work in safe mode.  I can't find my XP cd.  I don't have the serial code and key.  How can I load xp and try to fix the problem.

  Thank you
  Mike

  original title: need windows xp pro

  Hello

  Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.