USB over IP and vMotion

Similar Questions

• Satellite P300: - 0701 usb over current error on the splash screen for the hc port

  Hey there,

  Yesterday I woke up and I started my laptop, and it gave me this error at startup:
  0701 usb over current on hc port
  0701 usb over current on hc port
  I had the possibility to press f1 to continue and f12 to get into the bios.

  When I press f1, that my laptop will not start, it brings me to the BIOS anyway. Then when I restart, the screen turns black and does nothing.
  Now I does not solve the screen doing nothing problem by removing the battery and replacing the battery, but I still have these USB errors.

  I also noticed that before that there is this problem, my laptop does not recognize a storage device, not even my blackberry. He acknowledged, however, my mouse and keyboard (since they are not storage devices).

  Can someone help me? Thank you!

  What model of laptop do you have exactly?
  When you start your notebook F8 press to display the advanced startup options.
  It work? You can start a computer laptop in safe mode?

• Questions on Satellite A100-787 - USB over current on HC/Port USB

  The next day, when I turn on the laptop
  TOSHIBA Satellite A100-787
  I saw the error message: -.

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  ERROR

  0701: USB over current ON HC/Port - Bus: 00 H dev. : 1DH Fun: 01 H / Port: 00 H

  It me not allow Windows to connect. Hope someone has a solution for this error.

  Hello

  Believe me; I see this error message for the first time.
  This certainly isn't a simple error due to software problem, but I think there might be something wrong with the hardware.

  But before you contact the ASP in your country, you should check this:

  If you are not able to boot in windows, so why you n t try to reinstall the operating system?
  Try to boot from the Toshiba Recovery CD and check if it of possible to reinstall Windows.
  In addition I recommend access to the BIOS and try to pass the default BIOS settings.

• Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 01 H / Port: 00 H

  I have been using the laptop without any problem until I encountered ERROR as follows: AArrgg! @#$

  ************************************************

  Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 01 H / Port: 00 H
  Error 0701: USB over current on HC/Port - Bus: 00 H Dev: 1DH Fun: 02 H / Port: 00 H

  Press F1 for Setup, press F12 for Boot Device selection Menu
  **********************************************

  Well, the F1 takes me into the Bios, well all eyes. And F12 does nothing. I tried to boot from the CD drive, but of no use, I tried to solve million methods but invain I could not if anyone has a solution for this, you can provide, I will be very grateful

  Thanks in advance

  Srini

  Insert the cd of the same wait o/s until it reads "loading windows files" then here you eject the cd /dvd. This work for me.

• USB over IP Security

  What are the security issues related to the USB over IP application?

  Hello

  Make sure that you put on the devices, where they are, etc. In general, you have any questions of USB over network.

  If you use these, they go directly to a virtual machine, which means that the only thing you need to do in vSphere correctly route this traffic. I deal with their network as its own zone of confidence and limit the VMs can access this network.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014

  Author of the books ' VMWare ESX and ESXi in the business: Planning Server Virtualization Deployment, Copyright 2011 Pearson Education. ' Of VMware VSphere and Virtual Infrastructure Security: securing the virtual environment ', Copyright 2009 Pearson Education.

  Virtualization and Cloud Security Analyst: The Practice of virtualization, LLC - vSphere Upgrade Saga - virtualization security Table round Podcast

• Should we the DRS and VMotion for tolerance fault? Small cluster host 3

  Hello

  I'm slightly confused on some information coming from two different directions. We are in the stages of buying a package of Vsphere Essentials Plus and intend to build a 3 host with shared storage cluster. VSphere essentials plus the package comes with HA which, from my understanding, fail over automatically and restart the virtual machine on the available server. In case of server failure Vmotion or DRS provides something more than HA.

  We are told that VMOTION & DRS moves virtual machine of FAILURE to an available server without restarting the virtual machine. I don't know how that's possible, but I wanted to check first with the community.

  VSPHERE 4 ESSENTIALS PLUS seems ideal for small host deployments 3 @ $2 600 however, that same lic. for the regular VSPHERE enterprise is $2 800 per CPU that @ 6CPUS is more than $17 K.  Then why should we spend $17 K for business verus a $2 600 essentials more lic for such a small deployment?

  Thank you

  CA

  Yes, this is a new feature. http://www.VMware.com/products/fault-tolerance/

  It may work on the existing links, but it is recommended to have dedicated interface for FT.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• COS backup and VMotion networks

  I am trying to create an additional vswif to act as a backup to vswif0 used to COS and VMotion traffic.  Once the vswif has been added in place, if something happens to vswif0, as the cable car, traffic passes automatically to vswif1 or should I use the two vswifs at the same time?

  ________________________________

  Jason D. Langdon

  Hello

  No you will not get redundancy the way you describe. A second vSwif will not suddenly take over the primary vswif, routing automatically will not change. Redundancy is built into the vSwitch using grouping of NETWORK cards. You don't need 2 vSwifs, only 2 natachasery attached to the same vSwitch to the SC or to which he gives the portgroup SC.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  SearchVMware Blog: http://itknowledgeexchange.techtarget.com/virtualization-pro/

  Articles of blue Gears - http://www.itworld.com/ and http://www.networkworld.com/community/haletky

  As well as virtualization at http://www.astroarch.com/wiki/index.php/Virtualization Wiki

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

  Yes and no.

• Use TM for wifi, connect the ethernet security camera system, that will work, if it does then how the Installer (need instructions, over 65 and not tech saavy)

  I use a time machine / capsule (latest generation) to my wifi. Just purchased a Lorex security for my home that needs to be connected to the internet (via ethernet). Can I plug the ethernet cable into my time machine without affecting my WIFI? Or I need to by a second router to the ethernet connection?

  I need the instructions very simple and complete, over 65 and not tech saavy!

  Currently using Yosemite 10.10.5 (refuse to upgrade to El Captain until they get the bugs worked, I can't handle many problems lol).

  Please help an old lady, so I can't call my son (he is a PC person and does not include Mac people).

  Thank you very much!

  Can I plug the ethernet cable into my time machine without affecting my WIFI?

  Yes, you can use one of the three <-->LAN ports for this.

  Regarding how specifically set up cameras... with very good luck... another user who has the same camera system could see this post and be able to offer help on how to configure things detailed.

  Other users who have created other camera systems may be able to help as well.  But that's where we need your help.  Do you have a link to the configuration Guide or the Setup Guide for your camera system you could provide?

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Difference between USB power on and power off in W510

  Hi there everyone!

  I have not found a lot of information on this topic... Maybe a stupid question, but I need help...

  I was thinking of W510 purchase. Then, East-USB3 ports powered? I ask, because in the sales ads that I was looking for, they inform about two USB 3.0, a powered USB 2.0 and a USB 2.0/eSATA combo port. Then I started to worry, is powered by the 3.0 port. This is rather important, because I need the port superspeed for video capture, and my capture (Blackmagic intensity shuttle) draws its energy device is USB.

  Thank you in advance for support!

  Hello mate,

  All usb ports feed. What they mean by powered is that the usb 2.0 port is always powered even when the computer is turned off. This port is in the back and yellow. The other ports are not powered when the laptop is turned off, but they are when it is turned on.

• SanDisk Extreme USB Flash Drive and SMART failure

  I just got 3 64 GB SanDisk Extreme USB Flash Drives and all three show SMART failures to reassign bad sectors. I struggle to believe that all three could be bad on first use. I use a program on a Mac (SoftRAID(4)) to certify all drives prior to use, including the SD cards and USB keys. I've never seen a failure so far.

  Readers see the successful certification but present a SMART failure.

  What is a disk problem or a SMART question or what?

  Thank you

  Lief

  I agree that it is unlikely to have failed on the first use. Most likely, it is a problem with the SMART attributes. IIRC sandisk can't CHIP for this product so it formats without error, and data can be copied onto the discs with success, I wouldn't worry too much on this subject.

• What is a USB audio device and a Bluetooth HID device?

  What is the difference between a USB audio device and a Bluetooth HID device? Is there a difference? Different connection?

  My desktop computer shows the keyboard and mouse connections wireless in both places. I thought that I had to use the receiver provided with the mmouse and keyboard kit when I bought it and now I see it installed in two locations in the Device Manager. What does that mean?

  Hi jimafia,

  Let's start first of all, make sure you have software in place just in case you need more later.

  If they are the same exact drivers, it is possible that they have been installed twice, but the biggest problem is how much of usb devices you have connected?

  You can check and see when they have been installed in the properties for each driver.

  B Eddie

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.