USB port not to pick up when it is connected

Similar Questions

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• "Always-on" USB port not charging phones when turned off.

  Hello community,

  I have a Thinkpad Edge E520 1143 AK7, working on windows 8, 32 Bit Pro.

  From somewhere in the settings I had turned off load option on ' always - on ' USB port since I did not have a smart phone.

  Now, I have a smart phone and wanted to restore the facility. However, I can't find the option to activate the settings.

  Please note that I have activated all 3 BIOS options and 'refreshed' the machine to the default state.

  Please note that charges USB port when the system is started and stopped when I stopped the load PC.

  But no luck. Ask for your help on the same.

  Thank you

  EUREKA... EUREKA...

  Guys, it was informative.

  My phone was usually charge of the last USB port on the left side of the E-520, while I was working on the computer.

  After finishing my work, I closed the computer... all the power off...

  The required phone support... I unplugged the phone, close, waited 20 seconds and reconnected, computer connected... PHONE HAS STARTED TO LOAD!

  ("This suggests that all the USB" COULD "be always on the ports ) Lenovo... listen to u?

• USB ports not working not online when using wireless

  Hi, I use windows vista Home premium on a Fujitsu siemens Amilo laptop.

  Until yesterday, I always connected to the internet via a direct connection with my router. Now, however, I have have a direct link and can only connect to the internet through a Wi - Fi

  As soon as I logged online, all my usb ports stop working... I mainly use my mouse and my web cam... the cam sex is essential for my communication with my wife living abroad... Try as I might, I can't get the laptop to recognize any usb... as soon as I'm online... That is to say the internet disconnct, according to my USB again.

  I would be eternally grateful if you could help with this frustrating situation

  Kind regards

  Graham

  Hi CindyThrelkel,

  Try the following steps to resolve the problem:

  Method 1: Run the troubleshooter of material and check what is happening.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: You can check after uninstalling and reinstalling the USB drivers , if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following help link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  You can also check:

  In Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Hope this information helps.

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• Dynadock USB Ports not working not

  I have a Toshiba Dynadock (unfortunately I do not know the model number I can't). It is less than a year and has two USB ports in the front, with 2 Sockets (I guess that one of the earphones and a microphone), has 4 ports usb at the back and probably a DVI/HDMI port as well.

  The problem is that none of the USB ports work on it, you plug a USB device into one of the ports and Windows 7 does not detect something that is attached. It was working fine until recently, and then the printer started to play up by printing only a few lines in a document that you asked to print, and then after that nothing worked (I don't think that the printer is at the origin).

  When I reassembled the eject button on the dock, Windows recongonises ejection and hot flashes with the software Dynadock saying "Dynadock has been ejected" or similar.

  The computer is a Toshiba. I reinstalled the drivers, made a restore to a date when I heard he was working and have restarted the dock, but nothing worked so far. Any suggestion would be appreciated.

  Thank you

  Hello

  Try it please use this driver - http://www.displaylink.com/support/downloads.php

• Satellite P10 Series - USB Ports not working not

  Hi - I have a portable series of P10, PSP10E-0RCJM-EN.

  Don't know when or how this can happen, but none of my USB ports work integrated.
  They are all recognized and installed when you look in the Windows Device Manager.

  I am running Win XP Home Edition with SP2 and latest drivers and BIOS downloaded from the Toshiba web site.
  I had the hope that it might be a simple device or a driver of motherboard problem, but does not appear.

  Using a card PCMCIA USB works very well, but uses only one card slot that I need for other purposes.

  Anyone has more suggestions please?
  I hope you can help, impatience of someone soon!

  Graham

  Hello

  Try to remove all the ports from the Device Manager.
  Then try to restart the device. After this procedure, the operating system should recognize and install again the USB ports.
  It would be very interesting to know if the ports are working properly after this new facility.

• Computer laptop HP Envy 17 - USB Ports not working not

  Product: HP Envy 17 Notebook PC

  Operating system: Windows 8.1

  When I try and use the USB ports on my laptop, the system recognizes not the device is connected, or allows the unit to operate. There is no error message and device icon to remove safetly does not appear. This problem started after I ran a few Windows updates before turning off my computer for the night.

  The devices worked normally before but have stopped since then. Several devices have been tried, but to no avail.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you.

  Looks like that the USB Ports have stopped working on your laptop and your need help

  We will surely help you with this question at the earliest

  I'd like to request you to perform the REFRESH of your laptop back to a previous state

  When everything worked well and normal

  Step 01. Please go to settings on your laptop computer laptop

  Step 02. Select the general tab on the left side

  Step 03. Click on "refresh your PC without affecting your files.

  Step 04. Follow the prompts on the screen to complete the refresh/system restore

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• USB ports not working on DV6149US

  I have a DV6149US which is under Widows XP SP3 and was fine, but suddenly my 4 USB ports no longer work, even for the memory card port

  When I connect a device or a memory card, I have the typical noise that the device is recognized but it never appears in my windows computer and I can't read or write, when I disconnect it I have the typical sound

  I don't know if it's a virus, I have McAfee Total protection,

  How can I find my USB port and memory card to life?

  I tried to run all the drivers available on the page HP for the DV6149 successfully the

  Thanks for your help

  François

  Hi François,

  Your model has USB ports 1.0 and if the old USB drive works but other USB devices are not that what would they need to a USB 2.0 port. The basis of xb3000 will support your DV8-1093 in terms of power.

  Thank you

• Z500 8.1 Windows 64-bit USB ports not working not

  Hi everyone, now I have bought a lenovo Z500. After update to 8.1 Windows 64 bit, USB flashdrives could not run properly eventually Explorer Windows did not. When I try to restart, it blocks on the screen "Restart" and I have to press and hold the power button to power unit off which is very dangerous for the laptop. Other usb devices work well as a drive external hard, mouse and keyboard. USB flash drive only have such a problem. When I insert my USB key, I hear the sound which indicates that a device has been inserted. It is not the usb flash drive, because I tried with different USB keys and the same thing happens. All USB keys works well on my desktop (Windows 7).

  Thank you..!!

  After you uninstall a software firewall, USB port, back to normal.

  Thank you.

• T410 USB Ports not working not

  Hello, I would just start by saying I am new here and I'm not too aware of the label, so I apologize in advance.

  I bought a 2522EC8 from Lenovo Thinkpad T410 manufacturer refurbished a few days ago. My USB ports are simply not what either. I tried to uninstall and reinstall the drivers. The only sign ports USB show is when I plug in my mouse, the mouse lights up, but it does not actually work. When I look in disk management, the only drives that appear are reserved system, drive C: and D: drive.

  I don't know what other information I need to provide, so thank you for the advice on that. Thank you!

  Thanks Mithun, none of the four worked at all ports. I had checked the BIOS, plugged and replugged multiple different devices USB, uninstalled/resintalled drivers, downloaded the chipset drivers all. Nothing has worked. I ended up simply return the laptop. Thank you for your answer!

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers

• Before USB ports not working only not with non-powered devices such as USB memory keys

  I have a K430 with 2 front USB ports.

  When I connect a device like an iPod, it works fine.

  When I connect a device not powered such as USB keys nothing happens:

  1. No light illuminating on the stick.
  2. No recognition of the device by Windows.

  I tried the stick in a hub connected to the ports on the back and it works fine.

  I am typing by using a USB keyboard connected directly to the ports on the back, so I know they work.

  I saw a post similar (but different) for a K450, but after trying to update the drivers from the chipset, I get a response saying that my drivers are all up to date for all USB devices on the system.

  I am running Windows 8.1

  Any other suggestions? (I want to avoid a reset to the factory settings that my wife uses the PC for work and it would take an age to reinstall all the software and rebuild the file structure)

  Well,.

  I tried to update the drivers, but that did not help so I investigated further.

  It turns out that the case goes beyond just enough away on the PC and my USB (they are both relatively old) that the connector has no sitting far enough into the hole. Once I used a cable to connect the two everything worked normally.

  Thanks for those who took the time to read my post.