USB ports do not allow the iPod to connect with the system.

Similar Questions

• Satellite 1800: USB Port does not allow the IPod to work

  Hello
  I have a portable Satellite 1800-314
  I bought a new IPod.
  When I connect it to the laptop, it does not work.
  There is a message that says: we need more speed into the USB port and it seems that the port is not the right one for the IPod.

  Do I have to update the Bios as well?

  I need a big help!

  Thank you

  Stef

  Hello

  As far as I know the Satellite 1800-314 uses USB version 1.1.
  It seems that your IPod needs a high performance USB (Version 2.0)
  Unfortunately, the BIOS update help doesn t. You can change t the USB 1.1 to USB 2.0.
  I think that the only way to connect the IPod is to use the PCMCIA card.

  Good bye

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• WiFi radio adapter off, the USB ports does not and the Bluetooth adapter is no longer visible... Please help!

  I had my laptop Dell Vostro repaired under insurance in January 2013 after a spill of liquid.  HAAC Ltd. has replaced most of the laptop - but the return, the SD card did not work.  This seems to be due to the engineer he connects not properly and the company recommended it and returned it to me again.  A couple of months, I found my USB was temperamental - so is my built in Bluetooth adapter.   Last month - the wifi does not work for most of the time either so I have to connect to my router by wire.

  This could be a problem in windows 7 - all my problems seem to be related to network adapters.  If it's a hardware problem - does anyone know if it could be another loose connection?  HAAC Ltd. only give a 3 month warranty on parts that seems just a little.  But if this anomaly is due to the production of poor quality - that is not properly connect the laptop then I'll go back their again if they are responsible.

  By the way – there's a switch wifi on the front of the laptop - but is not currently be recognized.

  If anyone has settings that I could check that can help - especially if some inhibit the use of wifi.

  Thank you very much

  Hello

  Your wifi switch not recognized is probably a hardware problem. The rest could be a hardware or software problem.

  Method 1:

  Lets start by doing a reset to coercive. Follow these steps:

  1. Unplug the notebook (remove power cord), then remove the battery.
  2. Disconnect all USB devices and the connections between the USB ports.
  3. Let the laptop only for several minutes.
  4. Then plug the power cord without connecting the USB devices. Then replace the battery.
  5. Plug each device in turn, allowing them to load the drivers of devices one at a time (plug in the appliance and wait its loading all its drivers before installing the next USB).

  The computer recognizes the USB ports? All of them or none of them?

  Method 2:

  Open Control Panel, Manager of design. Click the view tab, and then click Show all devices. From there, you can remove all instances of USB devices and restart the computer to see if the problem resolves. Repeat this procedure with the wireless adapter (uninstall and reinstall, ensuring that there is only one instance of the wireless adapter).

  Method 3:

  Create a new user account by following the instructions in this article:   http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem?  If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.

  Try these methods and post your results here. I'll be here waiting for the results!

  Kind regards

  BearPup

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite M30-604: USB Port can not find the driver

  Hello

  I keep having the same problem on my Satellite M30 604 when connecting to a USB device.
  It does not really matter with this kind of device, the problem still.

  Whenever I have insert the USB plug into one of the slots, my home XP keeps popping up the wizzard software.
  Even with devices without drivers such as USB keys, it keeps bothering me and finally tells me that it cannot find the right driver.

  If I try to install a printer, it installs the software found, but finally stops the operation because it can't find the driver (?). I don't know in what direction I should look at to solve this.

  So if anyone can help me on this, I would be very grateful!
  Edwin

  Hello, Edwin

  It's very strange because it is not necessary to install a USB driver and standard Microsoft USB driver should work well. I put t know if this can help, but please check this page

  This fix is also part of the factory settings (recovery image on the delivered CD). By the way: your device is about three years old and it will be interesting to know since when you have this problem. Just for example: I have more Satellite 1900 with USB 1.0 and use USB keys and drive external HARD without any problem.

• "User profile service" will not allow my daughter to connect with his user account

  Qwest High Speed Internet 4.1 on both portable child, Norton installed, uninstalled McAfee installed. Œuvres of son, daughter won't let his newspaper on sub account. Vista rpet "user profile Service failed to load the profile.  My administrator account will work, get the message 'DeskTrayManager' has stopped working. When I click 'debug', it tells me to go to the updates of windows, what I did. Any thoughts?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• USB port does not detect the USB storage

  Hello

  My company gave me a Lenovo ThinkPad L420 and whenever I connect the USB external storage, I am not able to see it on my computer but I can see the unit on Control Panel devices and printers. Please let me know how activate or activate?

  Thank you

  Sayed Toufiq.

  You can google for it!

  http://pcsupport.about.com/od/Windows7/HT/change-drive-letters-Windows-7.htm

• Satellite Pro M70 - USB port does not recognize the device

  My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

  The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

  What is the problem? Can do nothing about it?

  My operating system is XP. and my laptop is 4.33 year.

  Thank you.

  Hi Mannix,

  Have you already updated the chipset drivers?

  I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

• (Redirected) M3800 wakes up only to suspend if the USB device is inserted into the USB port, if not restarts.

  My laptop (M3800) sleep (S3 mode "suspend to ram") ok?

  But he only wakes up correctly if the sleep + curriculum vitae is performed so that a USB port (key, mouse, etc. on sector). If this isn't the case, it simply performs a normal start, so lose the session.

  BIOS version: A09. I had to activate "USB wake support" to allow the computer light up when being opened. Otherwise, it would just stay off and require a hard restart (by pressing the power button for 10 seconds).

  I've been digging on this subject for a while and found no answers. Any help will be appreciated!

  PS: do not ask me to update the video drivers. It's a hardware problem BIOS here.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• USB ports do not work on satellite 40 X after reinstalling the operating system

  Hi all

  I formatted my laptop X of Equium 40 recently and since then the USB ports are not recognition of everything that is plugged into the port.
  Can anyone provide me with the drivers. I use Windows XP Professional.

  Thanks in advance
  SKP

  Hello

  It seems that you have installed the CD Microsoft Windows operating system and not the Toshiba Recovery CD
  In this case, the installation of Toshiba drivers available on the driver page is necessary.
  Have you installed all the drivers in the correct order?

  For most installation instructions are placed on the driver page, and you must always follow the order of installation recommended in this document.

  Have you installed the chipset utility? This Intel application is one of the most important applications and must be installed at the beginning.

• By selecting USB port is not available in the Installation Wizard of Pinter in XP - 2.

  By selecting USB port is not available in the wizard Installation of Pinter.
  Tried editing the registry and found local-edit string - data value = localspl.dll. "what is normal. Reset once more.
  Resolution not yet found.

  Hello

  1 is your other USB devices work well?
  2. What is the brand and model of the computer?
  3. What is the brand and model of the printer?
  4. who is the Service Pack installed on your computer?

  Method 1:

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  Note: If you have Service pack 2 on your computer, and then try to install Service pack 3 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:

  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and perform a test to ensure that the problem is solved

  See also:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_portsw.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/282842

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry