USB slot

Similar Questions

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• Equium A200-1VO - need more USB slots

  Hi all

  I seem to have PCMCIA slot on my laptop and need of more USB slots, does not have the material that I connect through a hub.

  So I bought a USB PCMCIA type II card and he'll go in the slot.

  I bought the right thing?
  When I look into the slot on the side of the laptop, it does not have the right size inside the card to connect, it looks like half of the width of the slot... of ideas, or advice?

  Thank you

  Sorry, but you bought the WRONG card.
  You bought a Cardbus Card, but you need a card Expresscard 54 or 34.

  Please visit this link to see what I mean
  http://en.Wikipedia.org/wiki/image:PCCARD - ExpressCard_ZP.svg

• USB Slot/header on mother board-area 51

  So I upgraded to the Corsair H80i V2 in my area 51 R2, everything is fine except that I can't find the USB slot on my motherboard for the H80i plug. Area 51 doesn't have a slot on the motherboard? If this is the case can someone tell where his establishment. Thanks a bunch!

  

  It qwite simply does not have a

  Without knowing if it works or not, you can try to share his unique 2.0 header--> header can power two devices: one device in one row from the top down, where the front o FIO Board is considered to be "two devices" or occupies both the top & bottom line

  

  on the left, Corsair Link = 1 device usb cable >< right, 2="" of="" those="" can="" plug="" into a="" usb="">

• Cannot find USB slot Drivers of HP Pavilion G6 2302ax notebook pc

  After downgrading to windows 8 for windows 7 works the usb port on the right side of the laptop, nut the two on the left side do not work. Driver search Windows says no driver found and unidentified ERROR.

  Please if you can give me the link to download the drivers.

  USB 2.0 port/ports are supported by native drivers included in Windows 7. AMD USB 3.0 port/ports require additional driver to be installed. Please try the Drivers of the Chipset AMD (USB 3.0, AHCI and Chipset) from AMD. The first driver is for Vista, 7 and 8.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Why each Storage device I plug my usb slot shows all files as shortcuts? Help, please!

  I am foreigner working abroad. A co worker lent me his portable external hard drive, as soon as I connected it to my laptop to access ALL the files were in the shortcuts. I thought oh OK, this is how he has her but, when I went to reach my own HHD is also in the same format (all THE shortcuts) now each storage device I plug into my laptop computer does the same thing. I know it is a form of virus, but I do not know how to fight. Some people have suggested Kapersky and various other anti virus programs. I don't want to lose ALL my data either which I said anti virus programs. Any advice would be extermely useful.

  Hello

  You can scan the computer for virus/malware using the check and scan Microsoft security if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• My two front USB on the front slots do not work. How to decide what could be the problem? Thank you

  My two front USB slots don't work. How to decide what could be the problem? The machine is a HP Pavilion p6516f-b. Thank you

  try to uninstall the drivers (usb root hub) from Device Manager, restart the pc if you see little red or yellow circles can mean the mistake with the equipment. see if the keyboard works in ports

• Problem with slots Usb not work after installing Windows 7

  Hi all

  I just had a guy fix my brand new computer, after that it was abandoned due to an accident than an anne 5. I told him that I wanted Windows 7 installed on the computer instead of 8. He did and got it all and running, no seven complaints only 1 usb slot works now and don't rest. Question is how can I solve this problem? I tried unistalling and reinstalled it a nothing still.

  Want HP dv7-7230us

  Product #: c2n66ua #aba

  Possible the AMD Chipset is required - includes the drivers for the USB 3.0 ports:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• Envy 17 t-j100: HP Envy 17 t-j100 Distance between Slots USB suggestion

  I designed this post as a recommendation for HP.

  I have a HP Touchsmart Envy 17 t-j100 and everything is great so far.

  The only thing that is really annoying is the distance between the USB ports. PLEASE increase the distance between the USB ports for future models. I have a lot of problems tryng to connect everything I need.

  

  Even if I try to open the DVD player, it will get stuck in my USB device. I mean how hard is to put a distance of 1 cm between them?

  

  If the USB cables are standard size, there is no problem, but most of USB devices are now much wider than a standard USB cable and I continue to have problems.

  

  I mean it's a laptop 17 ", there is plenty of space on the sides. In the end, it is best to drop the DVD player and put a VGA connector instead, but with the largest distance between the USB ports.

  

  I plan to buy another DESIRE in the future, but I really want my new laptop have USB ports with a wider bewtween to distance them.

  Thank you very much and I hope that HP will take care of this little problem on future models.

  Good day.

  Hi @catapara89 ,

  Thank you for visiting the Forums HP's Support and welcome. Thanks a lot for taking the time to make us share of your suggestions on the USB slots. It is important and has been seen.

  Have a great week.

  Thank you.

• Windows 7 not recognizing memory sticks in slots USB

  Hi when I put the memory stick to any USB on the computer, I receive a message first came to ask me to format the memory stick. I even get this if I enclose my TomTom GPS on the same USB slot.   If I click on the drive designation, I get the following message:

  {{K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}}

  I know that the sticks of memory are OK, as I have tried several and also tried all the USB slots on the computer and another computer.

  I don't remember doing anything for having caused the problem since the last using the disks of the USP.

  Using windows 7 Home premium.

  Anyone know what is the problem and how to fix it please?

  Concerning

  Windows7RULES

  Finally, I used a data recovery program.  Recover all files and files downloaded from the sticks of memory on my hard drive.  Formatted in NTFS and I am now able to use chopsticks as well as my recovered data, the sticks of memory.

  All sorted

  Concerning

• Satellite Pro M70 - USB port does not recognize the device

  My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

  The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

  What is the problem? Can do nothing about it?

  My operating system is XP. and my laptop is 4.33 year.

  Thank you.

  Hi Mannix,

  Have you already updated the chipset drivers?

  I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

• Create a USB from the recovery CD recovery provided - SOLUTION

  You don't have to buy and CD/DVD external for use provided recovery CD. I guess you all have access to a computer with a CD player. Also, you can buy a 2 GB USB flash memory.

  Using any other computer with a linux or win OS - insert the CD and create the image of this CD .iso file using any application of CD/DVD writer provided. If you use Ubuntu or linux in general, you can use of Brasero CD/DVD burner. Once in the Brazier, choose Copy CD/DVD and in the drop-down menu, select image file. Brasero will create the .iso image file and save it on your hard drive in GNU as file brasero.iso.

  If you prefer to use the terminal / shell to create an iso file enter these commands:

  sudo umount/dev/cdrom

  DD if = of = file.iso / dev/cdrom

  Now we have created the image file and is sitting on the hard drive for you. Now we must create a USB bootable from this image. To do this, download Unetbootin from the link below. It is available for linux and win.

  [http://sourceforge.net/projects/unetbootin/]

  Once you have downloaded Unetbootin, you insert the USB memory (it takes 2GB). Launch Unetbootin. Now the option select the second option - iso image and browse to the location of the file on your hard drive and click Open. Below select the usb - slot Linux key something like/dev/sdb1 or/dev/sdc1 - usually it is the name of the drive selected automatically by Unetbootin.

  Click on apply or Ok. the bootable USB key will be created in a few minutes. Once it's done insert in your Toshiba NB 100 and press F12 to start the netbook, a menu option will display - select USB device and press ENTER.

  Now the machine will start and menu start Unetbootin will show - recovery SELECT, then press enter and follow the instructions - and you'll be all set. No need to spend extra money for an external CD drive.

  I tried yesterday and works like magic. Good luck.

  -----------------

  Post edited by: Admin

  * This procedure does not work correctly! *

  Please follow the instructions created and validated by the user * boandlkramer *.
  Here is the link to the site:
  http://www.georgkainzbauer.de/gtkdb/index_7_544.html

  Best regards
  Admin

  Hay Karloss

  10 points for you! If you have any tips more useful, you're welcome.
  Thank you

• Toshiba 48L1433DB Led TV will not play Avi USB files

  Hello
  As stated above, my new TV initially played the Avi video files from a USB Pendrive with no problems. Now, he tells the Avi files are not supported and will not play them. I tried the two USB Slots, same problem.
  The USB plays fine on my PC.

  I tried to update the software, but it has not finished searching. My TV is NOT connected to the internet, and I don't know how to upgrade the firmware? or how tr again update any software. I have no manual at the present time.

  Thanks for any help, keep it simple please.

  Limey67

  Hello

  I found some interesting details in the user's Manual: Please see page 40
  Formats of files supported for USB Mode
  http://www.Toshiba-OM.NET/PDF/manuals/LCDTV/English/Country_Specific/L1433-48-English-specific.PDF

  You will find the audio and video codec supported.

  Please note that it s not enough to use supported like mpg, mkv or avi file extension
  As already mentioned by user above; You must use supported codec.

• Satellite Pro S300 - USB no longer works

  Hello
  I have a 6 month laptop Satellite Pro S300-100 and running Vista 32 bit. He got 4 USB slots, 1 handset that works on the left side and 3 USB2 connectors right side and these 3 suddenly stopped working. I tried different connections, memory stick, external drive, USB mouse, but they are all dead.

  I've tried deactivited and operated them, no change. I checked the ports and the response of the system are that they are involved.

  I had a similar problem earlier on a Tecra 9000 a few years ago and the replaced the motherboard.

  Anyone has a solution, please?

  Hello!

  Do you have the yellow marks in Device Manager?

  I think that there is a hardware problem. Contact an ASP (authorized service provider) to repair your laptop.
  Here you can find:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye