Why each Storage device I plug my usb slot shows all files as shortcuts? Help, please!

Similar Questions

• Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Hello

  Did you follow the "AutoPlay Repair Wizard"?

  You can follow the link provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information.

• Newbie question: show all files under Configuration == > storage?

  Hello

  I have been using VMware workstation for awhile, but at work, we have been 'given' an ESX instance for development which access us via Vcenter.

  From the workstation, I am not so familiar with this environment, so I hope I write at least in an appropriate place ...

  Anyway, my question is that when I'm in Vcenter and go to the Configuration tab, then storage (left) to see what is different volumes, I * think * that it shows all files.  For example, if I have a VMDK, it is to show only the VMDK root and not the flat file.  I know that because we've created a guest with a 50 GB disc, and when we downloaded "the VMDK", we ended up with the smallest hard, as well as the largest flat hard-xxx.

  As I said I'm more use on my computer, where I have full access to the underlying files, so it takes some time to get used to this environment.

  The reason for the question is that I'm used to things like manually copying my base VMDK files when I create my own clones, but since with Vcenter, I can't 'see' all the vmdk, I kind of don't know what I'm doing deal with.

  I hope this makes sense?

  Thank you

  Jim

  Difference between VMDK and Flat.VMDK.

  VMDK is a discriptor file mapped to raw disk (flat.vmdk).

  Flat.VMDK is a raw disk where all system data is backed up.

  For example, you create any disk on a virtual machine you will get 2 files one is vmdk and another is flat.vmdk.

  VMDK are visible when you go to the configuration and storage tab and browse the data store and will not be displayed it default flat.vmdk.

  But a raw disk, you can see when you connect console esxi ot via putty and go to vmfs\volumes\VM name\ flat.vmdk.

  When you download, you will be able to download vmdk and flat.vmdk. If you download only vmdk on the navigation data store.

  Award points if the answer is useful or appropriate by clicking the sub tab.

• Why don't I veiw my pictures can't. shows the files but not photo

  My computer shows the files on the screen, but you must click on each photo to see. Never had to do before.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Why my preferences of MacBook Air (Yosemite) do not show all of the options that show on my MacBook Pro (Mavericks)?

  Each time, click on "Firefox - preferences", I get only a partial view of the options that are displayed normally on my MacBook Pro (Mavericks). If I click on a different subtopic, preferences to close and reopen the preferences, I get a more complete screen on THIS subject, but never have I could see "saved passwords" or "Change Master password" on the MacBook Air.

  This seems very odd. It would be useful to see what you're talking about. Can you post some screenshots of the respective preferences and describe the difference you see?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

• Recently, my laptop screen is too short and needs to adjust each time that I have turn it on, or change the site. Help, please?

  Screen on laptop needs the length by adjusting each time I have activate or change the site.  Can't see what the cause.

  Hi Maureen,

  Thank you for keeping us posted.

  I appreciate all your efforts really to try to solve this problem.

  To diagnose the issue in the new user account, I suggest you try to re-create the issue in the new user account and check if that helps.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Security, privacy & accounts

  http://Windows.Microsoft.com/en-us/Windows/Security-Privacy-accounts-help#security-privacy-accounts-help=Windows-7&V0H=win8tab1&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  You can also try running SFC scan and check if this is useful.

                                   

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Why the recent updates to Windows are close my IBM ThinkPad without warning? Help, please!

  Since I installed the latest Windows updates on my IBM ThinkPad (belongs to the office, one for me), the computers have decided to stop randomly without warning and without closing programs.  It happened first in the portable desktop computer and I tried a system restore, but it wouldn't.  Today, I installed on my computer but after I did a system restore.  I'll try that, but I guess that this will not help.  What can I do to get this to stop happening?   Is anyway to switch to Microsoft and tell them what is happening and have them repaired?

  OK, removing the updates does not solve my problem, so reinstalled. I solved the breaks down by turning the bottom of my screen Hardware Acceleration 1 notch. Always try to understand the underlying cause.

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Windows 7 is no longer reads the USB storage devices

  I have a problem similar to some other posts, but different enough so that I write it here.

  When I insert a USB storage device (like a Microcenter * Go Flash) Windows 7 Ultimate just shows a yellow exclamation mark next to the device in Device Manager. OtherDevices, USB Flash drive. Software update driver fails, no update.  Uninstalling and reinstalling has no effect.

  Under properties:

  Type of device: USB FLash Drive

  Maufacturer: unknown

  Location: Port_ #0003.Hub_ #0008

  Pilot wrote:

  Privder: unknown

  DAT: Not available

  Version: Not available

  digital GIS: dig signed ot

  Under Details:

  Hardware ID: USB\VID_1307 & PID_0163 & REV_0100

  USB\VID_1307 & PID_0163

  There is no ping, no popup. Nothing. All this used to work very well, and now, when I need to copy files to work urgrnetly, he's dead.

  Just rub a little salt, I CAN access the device through Linux in VMWare Workstation. But when vmware is not current execution, or when I disconnect and try to attach to host, nothing happens.

  I tried each storage device USB I can find and no luck on any of them.

  Thank you

  TMB

  After digging through the forums, I tried to copy the usbstor.inf and .pnf to the Windows\inf directory and reinstalled the driver through the Device Manager, and it loaded right up.

  I don't know, but I suspect that the impact of this change, there are other devices that can complain. For now, the process of transfer between W7 and VMWARE/linux seems flawless.

  TMB - back

• Mass storage device USB WD Passport 070 has

  I recently bought a WD Passport 070 (1 to) a USB mass storage device... I went through all the appropriate channels to get it recognized on my windows vista computer, and all said that it works well. (I did the whole Device Manager/uninstall everything and then analyzed for new and checked and then in disk management and said it's very good)  My problem is... Where/how you get?  in fact it open and start to transfer things to my portable hard drive?  Thanks for your time

  You have not said if the drive is formatted.

  Hard drives, which are main storage on your computer, need to be formatted before using them. Formatting a disk means configuring the disk with a file system so that Windows can store information on the disk. Already the format of hard disks in new computers running Windows. If you buy an additional hard drive to increase the storage of your computer, you may need to format.

  Formatting disks and drives
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  I hope I could help

• My external storage devices do not work.

  My laptop is running Windows 8 pro 64-bit version.

  Whenever I connect an external hard drive or USB key, it is not detected. I went to the Device Manager, it he showed that there is an error with the usb mass storage device. I checked and it shows the error 38 "code, an instance of the driver is already loaded into memory. Then when I restart my pc, it works fine, but once again the problem returns. I was faced this problem for about a week now.
  Is there a solution for this. Please help me out here.

  Hi Julie,.

  The driver could not be loaded because a previous instance is still loaded

  I suggest you run the hardware and devices Troubleshooter to check. This should solve the problem of equipment.

  Follow these steps to run the hardware and devices troubleshooter.

  a. press the Windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select show all in the upper left corner.

  d. run the convenience store hardware and devices.

  You can also use the Troubleshooting Wizard to solve the problem.

  a. in the device properties dialog box, click the general tab.

  b. click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.

  c. follow the resolution steps provided by the wizard to resolve the problem.

  Then, restart the computer.

  Reference:

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Let us know the status of the issue. We would be happy to help you.

• Why statistics, the project views and assessments do not show correctly?

  I have my account yesterday.

  Downloaded some projects have views and assessments.

  But total ammount of the views and ratings is zero. Why?

  

  When I look at the statistics, it also shows that my wallet is empty and 'all time' statistics shows 0 views and assessments.

  But when I change it to 'yesterday' it shows correct statistics.

  

  Help, please!

  Helpdesk has solved this problem.

• Mass storage device USB cannot start. Why?

  When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

  It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
  [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close] [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close]
  Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
  "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
  Driver version: 6.1.7601.17577
  Driver date: 21/06/2006

  Hi Jessica,.

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link given below which will help you solve this problem.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• HP Compaq 8100 Elite: Boot interrupted by the USB storage device

  If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

  I disabled each device start-up apart from the internal SATA hard drive and it still happens.

  Finally I found a BIOS update.

  On the HP consumer Support Site? NO.

  On an alley, ad - ridden, dirty pilots-for-all site.

  Anyway. It worked

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.