USB stick shows a removable drive instead of quote as the name suggests correctly in disk management

Similar Questions

• USB key shows in 'remove hardware safely', but not under the heading of discs

  The first time I used this USB flash drive, I transferred my library iTunes from my old computer to my new laptop and it worked, but now when I plug the flash drive, nothing comes up on my laptop.  The flash drive will appear on the taskbar under 'remove hardware safely', but it is not recognized under the heading "devices with removable storage".  I tried the flash drive on other computers to see if it's just my laptop but nothing appears on the other computers either.  What should I do?

  Hi kkaydance,

  Let us first check if AutoPlay is enabled, follow these steps

  Step 1: AutoPlay  

   

  1. open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  2 choose an action each time you plug in a device or insert a disc.

  AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Step 2: Locate the device in Device Manager
  

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, look for the USB device, and then double-click the device name.

  3. under the gaze of general tab for the status of the device for any error code indicated.

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
  If the problem persists,

  
  Step 3: run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• Does anyone know how to remove all words of 'copy' of the name line HAVE layers?

  I downloaded a script PSD which automatically delete the word "copy" of all layers. Inside of GOT it, I can't do this. Can someone help me? Here's the script jsx PSD file:

  ----------

  ///////////////////////////////////////////////////////////////////////////////
  Script name: RenameLayers.jsx
  Version: 1.0
  Date: 27/02/08
  "Use: Removes ' copy 1, copy 2, etc." in the name of all the layers
  ///////////////////////////////////////////////////////////////////////////////

  #target photoshop
  $.localize = true;
  var displayDialogMode = app.displayDialogs;

  app.bringToFront ();
  app.bringToFront ();
  app.displayDialogs = DialogModes.NO;

  processObjects (app.documents processDocument, function () {alert ("you have no open documents")})
  app.displayDialogs = displayDialogMode;

  ///////////////////////////////////////////////////////////////////////////////
  Function: processObjects
  Use: Work theMainFunction on each object in the list theObjects
  Entry: The list of objects (documents, layers, etc.), function to run on each object, function to run on parent, if there is no object
  Return: value returned by the function used
  ///////////////////////////////////////////////////////////////////////////////
  function processObjects (theObjects, theMainFunction, theAlternateFunction) {}
  var returnValue = null;
  If (theObjects.length == 0) {}
  If (!) () theAlternateFunction == undefined) & &! (theAlternateFunction == null) & &! (theAlternateFunction == "")) {
  returnValue = theAlternateFunction (theObjects.parent);
  }
  } else {}
  If (!) () theMainFunction == undefined) & &! (theMainFunction == null) & &! (theMainFunction == "")) {
  for (var i = theObjects.length - 1; i > - 1; i--) {}
  returnValue = theMainFunction (theObjects [i], i);
  }
  }
  }
  return returnValue;
  }

  ///////////////////////////////////////////////////////////////////////////////
  Function: processDocument
  Use: Treat the layers in the document with the function 'processLayer '.
  Entry: Document subject of Document index object
  Back: no
  ///////////////////////////////////////////////////////////////////////////////
  function-processDocument (objectRef, i) {}
  app.activeDocument = objectRef
  processObjects (objectRef.layers, processLayer, null);
  }

  ///////////////////////////////////////////////////////////////////////////////
  Function: processLayer
  Usage: Delete "copy" of the name of layer (Layer content Set of processes)
  Entry: Object layer Layer object index
  Back: no
  ///////////////////////////////////////////////////////////////////////////////
  function processLayer (objectRef, i) {}
  If (objectRef.typename == 'LayerSet') {}
  var layerCount = processObjects (objectRef.layers, processLayer);
  }
  renameLayer (objectRef)
  Returns 0
  }

  ///////////////////////////////////////////////////////////////////////////////
  Function: renameLayer
  Usage: Delete "copy" of the name of layer (Layer content Set of processes)
  Entry: Object layer Layer object index
  Back: no
  ///////////////////////////////////////////////////////////////////////////////
  function renameLayer (objectRef) {}
  var theRegEx = new RegExp (/ (\s*copy\s*\d*) + $/)

  If (theRegEx.test (objectRef.name)) {}
  Save the State of the layer (visible or invisible)
  var layerVisible = objectRef.visible
  var numero_index = 0
  numero_index = objectRef.name.indexOf ("copy")
  objectRef.name = objectRef.name.substr(0,indexnumber)
  objectRef.visible = layerVisible
  }
  Returns 0
  }

  
  ----------

  Anyone?

  I wrote the original code you have several years ago, I did a quick check and if you change the first lines of what follows, it should work:

  #target illustrator
  $.localize = true;
  var displayDialogMode = app.displayDialogs;

  app.bringToFront ();
  app.bringToFront ();
  app.displayDialogs = DialogModes.NO;

  processObjects (app.documents processDocument, function () {alert ("you have no open documents")})
  app.displayDialogs = displayDialogMode;

  The code has been mistake out on the lines that changed the displayDialogMode and who brought the application forward, so I have commented out them. I don't have time now to see that needs to be done to ensure that this work (if they can), but it should work for you.

• BlackBerry Smartphones Blackberry shows sometimes as a removable drive in explore / most of the time is not

  When I move my bb to my pc, normally when I click on explore, I get an icon for the 9530 which allows me to access my press card and only the memory of the device.  For the first time yesterday, I also noticed additional to explore the disks displayed in for my laptop, which allowed me to enter my ring tones folder and system files.  Now I see more two additional discs, that I've seen before which allows me to access these other records.  Someone knows how can I configure my system to always show my blackberry as a removable disk?

  Did not intend to intervene, but you get only options access additional folders in the mass storage mode. This option appears when you do a back up or turn on the option 'always ask' on device to ask when you connect to the pc.

• ESXi4 on USB stick can be removed during the race?

  ESXi installable, I've extracted and used dd to VMware-VMvisor-big-208167 - x86_64.dd

  on a USB key.  I'm now boot from it, do some virtual machines, and everything seems to work

  fine.

  I can remove the USB while

  ESXi is in place and reinsert before shutdown or not ESXi or his guests constantly use the USB device?

  It runs once per hour just after the hour. The cron task is in/var/spool/cron/crontabs/root

• Tab 'Search' shows u.k sites instead of sites in the United States

  When I recived the 9.0 upgrade, it was set to search sites and not US u.k like amazon.com. Instead, it has been defined on amazon.co.uk.

  How can I get the return of my native region parameter?

  Fortunately, I didn't uninstall completely and just tried to download the full installation on the firefox site.

  I'll have to check the about.config next time this happens and see if this area has changed.

• Windows 7 shows my D drive close to full, but the total size of the file is small

  I used the D drive for data, total size of the file (including system files and hidden) is only a fraction of the capacity of 138 GB. Can I fix? I already run the disk check.

  Thank you. I finally understood what happened. This is my windowsimagebackup file and separately too many backups in the MediaID.bin.

• My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

  I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

  On which computer data has been put on this drive? What is the file
  the drive system?

• Why do I need special software to remove CC instead of use only the features and windows programs?

  Why do I need to uninstall special programs to uninstall my apps CC or CC itself? Not just one, but two (!) of the separate facilities.

  What does Adobe on my PC that it can not be uninstalled via the path General windows programs management?

  I'd be smart and just reformat my drive after that I have served my machine with fire CC?

  Hello

  We have created the uninstall program so that all files/folders associated with the application are deleted successfully as well.

  Kind regards

  Sheena

• How to remove com files If you know the name but could not find their file location?

  Hello I have recently concluded that my terminal command:

  pkgutil --pkgs | grep fuse
kextstat | grep fuse

  That's what pops up:

  com.github.osxfuse.pkg.Core

  com.github.osxfuse.pkg.PrefPane

  com.google.MacFUSE.Core

  I want to delete these com files but I can't find them on my system anywhere? Anyone know how I can find them or how to remove through the Terminal? Thank you!

  No, you haven't. Those who are essential to the plug-in you use called OS X Fuse.

• How to disable the feature in Windows 7 to change all downloaded files for underscores instead of spaces in the name?

  I'm having a problem where any file I download from the internet is modifed by Windows 7.  Underscores instead of spaces added.  I use IE 8 32-bit on Windows 7 Professional 64 bit.   This issue is causing users a problem because most of our Applications are Web applications, and there are a lot of files that must be downloaded for reports or the import feature.

  Is their a solution to this problem/bug in Windows 7?  To review other forums on the Net, it seems that the change occurs because any file from a website hosted server must not have any spaces because it cannot be accepted if used in a URL.

  Any help on this would be greatly appreciated.

  Thank you

  kkuntchef

  Hello

  I suggest you post your queries and comments on the TechNet forum so that you will get the expert answer from TechNet support. See the link: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  Hope this helps you

• When you plug a usb (zip) without box drive appears... says the device works but is not

  I went into Device Manager and it shows the driver and says its working properly, but wallpaper said safe deletion of material, and I can't transfer all files from the USB.  I tried all ports on my pc...

  Hello

  You find the USB in the computer and disk management?

  Try the following steps:

  Step 1: Run the Fixit tool from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Check if the device is detected in disk management. If it is detected, and then format the disk and assign a drive letter.

  Follow these steps:
  a. Click Start, and then type diskmgmt.msc in the start search box and press ENTER.
  b. If you can see the USB drive, then right-click on it and click on format.

  See this link for more information on how to assign a drive letter:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?