500 Post Patch ODI Configuration steps

Hello

I applied the patch 500 to 11.1.2.2.300 environment.

I do post Configuration procedure

Import the following projects of odi/11.1.2.2.00/workrep INSERT_UPDATE mode:

- PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml


I chose the project to import

In select them files to import, there is no xml to import but readme indicates that we have to import PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml.

When I select AIF_FILE_PROJECT it's


We need to select Yes, then continue or I'm doing wrong. Help, please. My procedure is correct?

Hello

If you select AIF_FILE_PROJECT only this project xml files will be copied.

Basically these files replaced with the patch the patch.500 put a few new files instead of old one so you just need to import the project that's all.

the project name, you have to select that all xml files are present which will import.

Thank you

Pratik

Tags: Business Intelligence

Similar Questions

  • GC installation fails on the WHO with NodeManager Configuration step

    I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:

    ---
    #Domains and directories created by the Configuration Wizard
    #Fri 22 April 15:23:16 EDT 2011
    wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
    MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
    GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
    MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
    ---
    Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it

    I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.

    Details:
    Machine - Windows Server 2008 x 64
    DB - 11 GR 2
    WLS - 10.3.2
    GC - 11.1.0.1

    Install the Log:
    ...
    FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
    FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
    FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
    FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Launch NodeManager...
    April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
    April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
    April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
    ...

    Vijay,

    Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
    It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

    Eric

  • 11.1.2.3 and 11.1.2.3.500 installation patch...

    HI gurus

    I need to install a 11.1.2.3.500 system, which method is the best when I'm building the system from scratch? I have developed the following methods, but note of course that is well or better...

    (A)

    -Install the 11.1.2.3 on servers.

    -Install 11.1.2.3.500 patch installed on top of the 11.1.2.3 for respective applications...

    -Run Configuration with 11.1.2.3.500.

    (B)

    -Install 11.1.2.3.

    -Configure EMP at a 11.1.2.3

    -Install 11.1.2.3.500 game patches.

    -Re-run the configuration for 11.1.2.3.500.

    Thanks in advance

    rK...

    Hello

    Both options are good. I always go with option B before you start so you have to anyway even time all services.

    Thank you

    Anjum

  • Concern for ODI Configuration according to John Blog (ODI Series 4 - enter the designer

    Hi John,.

    I stuck with ODI configuration according to the Johngoodwin Blog (ODI Series 4 - enter the Designer)

    in the designer: WHEN I CLICK ON REVERSE UNDER the TAB COLUMNS; BUT HE NEVER RETURNS WITH FOLDER STRUCTURE AS IN YOUR BLOG EVEN MISTAKES.

    Kindly ADVICE HOW to CHECK THESE STEPS TO GET LEADERSHIP STRUCTURE IN DESINER. I am following all the steps as yours.

    Concerning
    N Kumar

    Hello

    Make sure that the data store is not locked before reversing, click with the right button on the data store and select locks > unlock.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • The configuration step of the calendar after the call to DAQm angular encoder, takes a lot of time vey even to 1000 samples per second. No idea why?

    I use an encoder in quadrature with DAQmx 6259, the call to read the outputs of the meter is slow, much slower than the sampling rate? No idea why?
    Thank you

    Hello Roxanne,

    In the title of this thread, you mention that the calendar configuration step takes a long time.  Is now called node configuration several times in your code?  You may find that your code runs faster if the channel configurations and the task doesn't occur once.

    Our example of the expedition, ' counting digital Events.vi ' may be of interest to you.

    Can be found by browsing our example search tool:

    'Help' examples

    Once opened, the example Finder you can find this example by browsing:
    "" material input and output"DAQmx" counter measures "County Digital Events.vi

    Best regards.

  • Updates to configuration - step 3 of 3 (over and over again)

    After windows vista update I get this message that I reboot: "updates of configuration - step 3 of 3-0%" (translated from Danish: o). After awhile, it restarts and I get the same message again. " Can someone help me, please?

    Marianne2010
    See if you are able to boot mode safe mode with networking (one of the boot advanced options).  If this isn't the case then start with your Vista support and select the option to repair your computer.  Then do a system restore to a date prior to the update.  Once you are able to start and access the internet, then install this update: KB937287.  Once it is installed, and then run Windows Update. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • to use the help of a friend (distance) the configuration steps should I take?

    Hello

    use the help of a friend remotely, configuration steps I have to take?

    1. I see nothing in the services to enable

    2. I don't see anything in the windows firewall so that it

    3. what one thing I see in the computer properties in the Advanced section, I can help vink (enable) of distance.     Wil only be this option enough to get help from a friend or remotely?

    My second question is

    I know there are third party software to make contact with the client computer (remote assistance).

    are there any simple quiet easy to use for customers and third party free software, if so wat is the name of it?

    Thank you

    Johan

    Hi Johan

    You can use built-in Windows 7 Remote Assistance.

    What is Windows Remote Assistance? :

    http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-remote-assistance#1TC=Windows-7

    There are also third-party products.

    Access, manage and support computers remotely:

    https://secure.LogMeIn.com/

    TeamViewer:

    http://www.TeamViewer.com/en/index.aspx

    Concerning

  • OIM11g R2 PS2 Installation - problem to the IOM configuration step

    Hello

    I install OIM11gR2 PS2 to computer virtual RHEL5.4 installation. And I followed the steps of fixation with success. And now the configuration step IOM after making the field WL creation and facts Admin Server and running upward.

    In Assistant de Configuration IOM, step 4: screen of the WebLogic Admin Server.

    I have entered the following values:

    URL of the WebLogic Admin Server: t3: / / < xxxx >: 7001

    Username: weblogic

    Password: xxxxxx

    After you click Next, it is not further.and of the Forum got stuck at step 4 for more than an hour. I tried several times but the same problem persists.

    Could someone please help me out here.

    Enjoy a quick help.

    Thank you

    Maryse

    I think that your SOA server is not upward. Early SOA server and then click Next. Make sure that before you run the Configure Server Admin and SOA are rising.

    Kind regards

    ARI

  • Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

    Hi guys,.

    I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

    I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

    It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

    Step 1.  Initialize the storage

    * Once in the CMC right-click on storage open storage gui initialization.

    * Member name: MY_SAN01
    * Member, IP: 192.168.101.10
    * Member gateway: 192.168.101.254
    Group name: MY_SAN
    Group IP address: 192.168.101.11
    Group of Memebersip password: groupadmin
    * Password Admin group: groupadmin

    It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

    Step 2.  Set ip management port

    According to the documentation of Dell, I have:

    To set the management port:

    * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
     
    * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
     
    * Connect to the PS-M4110 array as grpadmin

    Once I am in:

    Activate the management controller ports using the following commands in the CLI:
    0 > member select MY_SAN01
    1. (array1) > eth select 1
    2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
    3. (array1 eth_1) > upward
    4. (array1 eth_1) > exit
    5. (array1) > grpparams
    6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

    (array1 (grpparams)) > exit

    My interpretation is correct?  Now my questions:

    1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

    2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

    3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

    4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

    CLOSE-UPS

    I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

    Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

    I think I have the answers to my own questions:

    1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

    2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

    3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

    4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

    Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).

  • Pre EAS configuration steps

    First of all my environment:

    Windows Server 2008 running Exchange 2007 SP1

    Auto generated certificates (I didn't spit the outrageous fees public certificate yet)

    Palm Pre WebOS 1.04

    I had a devil of a time getting EAS to work, and I thought I'd share the steps we have taken to get there... Here are the General steps meant to help you where you need to go, I am not guaranteeing accurate and click screen.

    (1) make sure that you have a certificate generated by your server, yes it must have the name of your e-mail server either mail.domain.com in the certificate.

    (2) export certificate EXCHANGE, nowhere else, not IIS, not IE.  Follow this link to export the certificate of the Exchange shell and note that the user name field is not used for something in this field will not matter, but the password field must adhere to your strategy of password, so make sure that you meet the requirements of minimum password when you enter a password for your exported certificate file.  http://TechNet.Microsoft.com/en-us/library/bb310778.aspx

    (3) followed the others posts on how to save the certificate on your pre.  Bottom line, connect to your pc via usb cable, USB drive, do a right-click on the cert file and send to, Palm Pre by car.  Disconnect before.  Then follow the steps to accept the certificate.

    (4) on the Exchange Server, make sure that Microsoft Active Sync is set up and configured to use SSL (Server Configuration/Client Access, click the Active Sync).  You must enable SSL under IIS to your Web console. You're in IIS and Exchange Management Console services manager.

    (5) right click on the Active Sync service, click Properties.  Make sure that your URL is correct and that your firewall/router is configured to pass 443 traffic to the IP address of web internal URL listed here on the property page.  Mine is in this format: https://mail.domain-name.com/Microsoft-Server-ActiveSync

    6) click on the Authentication tab.  LEAVE THE BOX CHECKED for basic authentication... I had this not controlled and once we had the certificate and configured routing this was our last issue.

    7) go to your pre, make sure the cert is loaded with confidence.  Then configure your Exchange account for Regional service by following the steps.  You should be good to go!  I hope this helps.

    Matt Haywood

    Matt,

    First of all, I got it to connect today.

    Yes, I was able to export the certificate of the Exchange Server with the .cer extension and install this on the pre.  So that the research on this more, I was convinced that the name of the subject of the certificate should match the field in my mail server address, I tried to connect to.  So, I thought that the name turned to the public in the mail server entry (for example, https://mail.mydomain.org) would not work with a certificate which had a name of topic for an internal domain name (for example, mail.mydomain.local)

    Another forum discussions seem to indicate clearly that the Palm software is not read topic several other names, no more, even if turned to the public name is included in the San of the self-signed certificate.

    These discussions have also suggested that the certificate that is really necessary is that of CA.  So, I opened the MMC on our mail server. Add the Certificates snap for the computer account; drill down to the root Certification authorities to trust; Open the CertAuth certificate and exported it in the same way (extension .cer base64, no key or password); This charge on the Meadow while leaving the other installed certificate.

    He signed the and immediately started the synchronization.

    I will experiment a little more to see if only one certificate is needed, as some authors have claimed.  I also wanted to play with a third-party domain certificate that we have, I understand also pose problems for owners of pre (since it is a generic cert instead of a specific for the mail server).

    Moreover, my Pre came with version 1.0.3 of the software and I have not yet downloaded 1.0.4.

    Thanks for your great post, because it helped me to get this working.

    Rick

    Message edited by rick c 13/07/2009 22:57

  • Apply the 14833587 Patch fails to step post_deploy

    After you apply Patch 14833587 , run the post_deploy.bat fails with the following error message:

    Exception in thread "main" java.lang.NoClassDefFoundError:
    Oracle/sysman/emSDK/conf/TargetInstaller
    Caused by: java.lang.ClassNotFoundException:
    oracle.sysman.emSDK.conf.TargetInstaller
    in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

    Known problems?

    -wern

    Hello

    Confirm if the OS is Windows?

    If Yes, then we have a known problem.

    Cause:
    ====
    On the ports of Unix, we use post_deploy.sh that explicitly defines EMDROOT. This is not the case in post_deploy.bat

    Is discussed in the following bug:
    Bug 16061278: POST_DEPLOY of RACE. BAT FOR PATCH 14833587 FAILS WITH a NOCLASSDEFFOUNDERROR

    Workaround solution:
    ========
    As a work around, follow the steps below:

    1 set the EMDROOT variable manually:
    Set EMDROOT = $ORACLE_HOME

    2. run the post script: post_deploy.bat

    Now, this operation fails with the following error:
    C:\Oracle\oem\oms\14833587>post_deploy

    Post SGD automation deployment script [Version: 11.1.0.9.5, Build date: February 5, 2012]
    ________________________________________________________________________________
    _______

    Enter the location of the Patch: C:\Oracle\oem\oms\14833587\
    Please enter the SYSMAN password:
    ********
    ****

    The script will run the following commands:
    applypatch rest - patchHome C:\Oracle\oem\oms\14833587\ c:\oracle\oem\oms\bin\emctl
    Please check logfile "C:\Oracle\oem\oms\14833587\log\2013-01-18-14-32-07.log"...
    The system does not have the specified path.
    The script has failed to complete due to failure of the command. Please check the log file for err

    3. now the above error, choose the command that it runs in-house and run it manually:
    applypatch rest - patchHome Patch Location\14833587\ \bin\emctl

    Now the application of the fix is complete.

    Thank you
    Vincent

  • question about the stages of compilation post patch adadmin

    From the readme file.
    Apply this pack mini...
    Oracle Financials Family Pack G contains a unified patch driver and can contain additional driver files
    be applied with AutoPatch. Please apply the driver file on all nodes of the application-tier server.
    u3653484.drv
    You must perform these steps after execution of build using Administration AD (adadmin) driver:

    1 generate files of messages. (* 1st choice 1.) Generate Applications files menu)?

    2 compile applications or patterns.
    -How to do this? y at - it an option only for applications or simply do all?

    3 compile flexfield given in the tables of AOL.
    (Please note that the Flexfields automatically compile data when using them for the first time, for the execution of this task is not necessary.)

    4 compile the menu information.

    I'm not 100% sure what options I am supposed to provide the 4 steps above. Looks like step 3 is optional based on another post.
    If someone could just give me the right choice? It comes to 11.5.10.

    Hello

    1 generate files of messages. (* 1st choice 1.) Generate Applications files menu)?

    Of adadmin:

    Generate Applications files menu
    Generate files of messages

    2 compile applications or patterns.
    -How to do this? y at - it an option only for applications or simply do all?

    Of adadmin:

    Menu to compile/Reload Applications database entities
    Compile the drawing APPS

    It compiles all invalid objects, so there is no option to select the schema.

    3 compile flexfield given in the tables of AOL.
    (Please note that the Flexfields automatically compile data when using them for the first time, for the execution of this task is not necessary.)

    Of adadmin:

    Menu to compile/Reload Applications database entities
    Compile flexfields

    4 compile the menu information.

    I'm not 100% sure what options I am supposed to provide the 4 steps above. Looks like step 3 is optional based on another post.
    If someone could just give me the right choice? It comes to 11.5.10.

    Of adadmin:

    Menu to compile/Reload Applications database entities
    Compile the menu information

    All the foregoing is documented and explained properly to the "maintenance of Oracle Applications Documentation Set".

    Maintain all Documentation Oracle Applications
    http://download.Oracle.com/docs/CD/B25516_18/current/HTML/docset.html

    Thank you
    Hussein

  • W520 WiDi configuration steps

    Hello

    I just got a helping hand me down w520 and I was wondering how to set up the widi with my new LED TV LG 47LM7600 which has a WiDi built into the TV set. Can someone show me please step by step to configure the w520 widi? What software do I need? How to use the software for my TV? ect...

    Thank you.


  • ODI SDE_ORAR1213_ADAPTOR_SDE_ORA_SLAJOURNALFACT step in 11.1.1.10.1 running forever

    Hi all

    I finished the field mappings and run the initial process of ETL to load the financial data in a 11.1.1.10.1 environment. Step SDE_ORAR1213_ADAPTOR_SDE_ORA_SLAJOURNALFACT worked for nearly 11 hours before an order there. I'm running on an instance of Vision of the EBS 12.1.3 and loading only 2 books with ledger_type = "Primary" and limit the list of modules of subledger to three sources of document of 200, 201, 707.

    I can run this step even by using an earlier version on OLIVIER 11.1.1.8.1 and will culminate in 94 minutes and retrieve 4.5 million documents. I have not made a comparison between the SQL code of the two versions, but note the indications of database are used in the 11.1.1.10.1 version.

    Any suggestions besides delete indicators? Did anyone else encounter this problem in this version?

    Thanks in advance.

    Post edited by: user5861392, since I tried to change the indicators but without success. Been able to skip the step from SLAJournal and workload completed without error. Will record a SR.

    Thanks, I checked his stats, and which was not the issue. To correct the problem, we had to change the indicators in step so that the stage finish. I created an SR for this question and Oracle sent a MS Word document with the steps for

    modify SDE_ORAR1213_ADAPTOR_SDE_ORA_SLAJOURNALFACT, which worked but took 20 minutes longer to perform the extract as our solution. However, he had completed.

  • Assistance with ThinAPP 4.7% and 7.2 SAPGUI patch 8 (configuration files)

    We managed to create a SAPGUI ThinAPP version, but there are configuration files that we need to have visible in the sandbox of the end user. This is necessary so that these files can be updated to take account of any future system/server. Here are the files. Does anyone know how to do this or have a work around?  We had reviewed the ThinApp-SAPGUI pdf as well.

    Thank you

    PJM

    -saplogontree.xml: %AppData%\SAP\Common
    -saplogon.ini: %AppData%\SAP\Common
    -saprules.xml: %AppData%\SAP\Common
    -SapFrontendService.xml: %AppData%\SAP\
    -sapmsg.ini: %programfiles%\SAP\Frontend\sapgui

    Here is a working VB script that copies the configuration of the local computer files (can be changed for a drive mapping or a network) to the SAP GUI sandbox.

    The script automatically copies the configuration file from the folder "C:\SAPGUI Config files" in the sandbox every time that the application is launched. You can modify the script to copy only once by adding the OnFirstSandboxOwner or OnFirstParentStart function to copy the files before the ThinApp launched.
    Please follow the steps below:
    1. keep the 5 on the physical machine configuration files
    2. remove the respective ThinApp project files of these configuration files
    3. copy the VB script in ThinApp (root level) project folder and rebuild the package by running the build.bat file
    I tested the script and it works fine. Please, try the steps and display your results.
    PS: Rename the attached in .vbs file

Maybe you are looking for

  • 9.2.1 IOS IPhone 5 - automatically bightness went

    Hello everyone, I use an iPhone 5 and just put update to iOS 9.2.1. Now, it seems that the option for automatically brightness has been deleted from the brightness settings return. Can anyone confirm this and this or a bug? Looks like a downgrad to m

  • Error when running Windows Update 8007371C

    WindowsUpdate_8007371C""WindowsUpdate_dt000 error. " * title *."I get the following error when you try to run Windows Update, __WindowsUpdate_8007371C '"WindowsUpdate_dt000__Also, I can't get any other updates to run, I saw an error of Windows instal

  • Lost the definition file of

    When I go to uninstall anything Media Smart, I get the lost product definition file, and I can't uninstall anything.

  • BlackBerry Smartphones Can you synchronize all Outlook folders on a Blackberry "BOLD" using Microsoft Exchange?

    Hi, I use a Blackberry "BOLD" to view my Inbox, but I would love to see my other folders, including my spam folder. Is it possible to do? I do not use the Blackberry Exchange Server (BES) - I am using Microsoft Exchange. Thanks in advance for any hel

  • Adding an application

    I have three apps on CC and want to add another, how much it costs? My license is a teams. Oddly, I could not find either in conversation with the customer or telephone service.Thank you