use a hard file as a shared disk between two vm

Similar Questions

• new unseen files on the shared disk (rise of 2 VM Debian)

  Hello community,

  I'm quite new to VMware ESXi 3.5 and I can't find a solution for my environment, although I already read a lot of threads here and looked for other sources of help.

  I run 2 VMS Linux Debian and want to share my MP3 disc. The shared_mp3.vmdk was created with the 'thick' option and can be fixed on two VMS with success.

  If Debian VM #1 creates new files to the disc MP3, they are not visible to VM Debian #2.

  The only solution inside the VM Debian #2 is to umount SCSI 1:0, wait a few seconds and then raise it again. Of course, stop VM Debian #2 of the VI client and it starts again, makes the visible files, but both solutions are not a solution for this problem.

  Can anyone provide assistance?

  Do I need to install the software of protocoll sharing SCSI-2?

  Thank you in advance for your help!

  Here's my detailed environment:

  VMware ESXi 3.5 U4 with 2 VM Debian on the same physical host:

  VM Debian #1:

  'big' server that processes for example the new MP3 files and converts them to lower bit rates (e.g. for my iPod)

  Located within a green network behind a firewall with a write access to the MP3 disc.

  LSI Logic SCSI controller 0 with root disk (SCSI Bus sharing: None, debian1.vmdk located on the local storage as SCSI 0:0)

  LSI Logic SCSI 1 controller with MP3 disc (shared SCSI Bus: virtual, shared_mp3.vmdk is independent/persistent and located on local)

  storage as SCSI 1:0)

  (shared_mp3.vmdk has been created with the "thick" option)

  SCSI1.sharedBus = "virtual".

  Disk.Locking = "false".

  VM Debian #2:

  UPnP streaming server

  Located inside a red network with read access only on the MP3 disc. Debian Linux get the MP3 drive read-only.

  LSI Logic SCSI controller 0 with root disk (SCSI Bus sharing: None, debian2.vmdk located on the local storage as SCSI 0:0)

  LSI Logic SCSI 1 controller with MP3 disc (shared SCSI Bus: virtual, shared_mp3.vmdk is independent/persistent and located on local)

  storage as SCSI 1:0)

  SCSI1.sharedBus = "virtual".

  Disk.Locking = "false".

  iSCSI would push you in the same boat that the shared disk.  Two are block-level and will need you to have some sort of awareness of the bunch to them.  If you have only an ESXi host, you can create an internal network only for the two to speak to GFS or OCFS2 vm.  If you have more than one ESXI host, then you can consider a cross-over for both servers, or even a hub/switch only for the private network. You can run GFS on the same network as the usual traffic, it is not "necessary" to have a private network, comes to recommend, and it's only for server coummunication between them.  You need to open ports so that it goes to your vm.

  -KjB

  VMware vExpert

• vMotion (without shared storage) between two hosts with different vSwitches standard s VM

  I can VM vMotion (without shared storage) between two hosts with different vSwitches standard? The vSwitches on these two hosts have different names and number of NIC, but have the same name of portgroup.

  
  Thank you.

  Yes, you can in a Storage VMotion to one Esxi to another with no shared storage...

  It is important the portgroup bears the same name... This is the reference for the VM...

• How to create the shared disk between 2 ESXi servers

  Hello

  I created a laboratory with ESXi4.1 and ESXi5.0 machines with a few virtual machines on them on my laptop using vmware workstation 7. Now, I'm trying to add a disk to the two virtual esx hosts so that I can create a store of data through them to do some testing from day to day, but so far I managed to do it. I'm afraid of how would I have accomplished my test laboratory. Can someone help me on this please. Thank you.

  Kind regards

  AB

  beckham007fifa wrote:

  I created a laboratory with ESXi4.1 and ESXi5.0 machines with a few virtual machines on them on my laptop using vmware workstation 7.

  You cannot use just a shared between two virtual hosts of ESXi, but put up some "fake" your iSCSI storage, shared disk which could be executed in another VM on your VMware workstation. Here is a guide how to set this using the free Openfiler: http://rickardnobel.se/archives/26

• drive a shared lightning between two computers

  What is the best way to streamline the process to have an imac and a MBP and want to change several final cut pro projects out of the same drive at the same time on two different computers.

  CCan can't make a record. You need a San. The two editors cannot open the library even at the same time.

• I have to save files in the creative cloud, or can I use a local file server?

  I have to save files in the creative cloud, or can I use a local file server for sharing in exercise?

  You are not required to save the files in the creative cloud.

  Storing files online is simple and an additional service, but there are several advantages:

  • Your file is saved online in which case the file is accidentally deleted locally or your hard drive fails.
  • Previews of InDesign, Illustrator and Photoshop files in the web browser for someone who doesn't have these programs and would not be able to view the image file.
  • Share the file with another allowing them to comment on and download.

• NAS hard drive not accessible more: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  Dear,

  I am desperately looking for a solution for my specific problem how access my NAS.

  I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:

  -NAS is still working with my old Fritzbox, for testing that I went back-> ok

  -I can access the NAS via the dashboard or a TwonkyServer-> ok

  -When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).

  -J' changed my IP address (dynamic even static) and connections, password-> without success.

  -J' tried SFC with the result that found no violation of integrity. -> ok.

  Any idea?

  Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.

  You have another PC or laptop which has Windows 7/8 and try to access the NAS?

  You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.

• My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  My space free icloud is full, so I want to download all my files on my Mac and use a hard drive instead of icloud. I'm not happy to pay to store my files in icloud. How can I do this?

  Welcome to the Apple community.

  Locate in iCloud drive in your Finder, drag to where you want to save them on your Mac, confirm, you want to move them when the Finder prompts.

• Utility disk first aid indicates that it is a wrong number of hard file links

  After various software update yesterday the Mac mini has had several problems. I ran disk utility first aid, and he says 'wrong number of hard file links.

  Which allows to fix this?

  The drive has been successful to repair by disk utility?

  You must boot from recovery to repair the startup disk

  OS X: on OS X Recovery - Apple Support

  What problems did you have?

• Svchost.exe using excessive hard disk

  After the latest version of windows update 29 June downloaded the file SVCHOST. EXE is using memory and excessive hard drive. I have 6 GB of memory and an Intel! 3 processor.

  The svchost.exe blocks all other processes and prohibits the normal use of the computer. I tried the system restore, but could not restore to any restore point, even in safe mode.

  Thank you very much for the help.

  Huib.

  Hi HuibKeizer,

  Method: 1

  I suggest you to download Microsoft Safety Scanner from the following link and scan your computer for viruses and malware.

  Microsoft safety scanner

  Method: 2

  Also I suggest you perform a file system check to find all of the corrupted system files.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files

• Clone several nodes and appl_top shared using the XML file backup

  Can I use work save file of application context to repeat the clones and avoid to perform following steps:
  
  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile = < context of Applications for the existing node file >' and ' perl-I < AU_TOP > / perl txkSOHM.pl"orders ")
  
  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  ma_apps wrote:
  Can I use work save file of application context to repeat the clones and avoid to perform following steps:

  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile =' and 'perl - I /Perl txkSOHM.pl"orders)

  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  You should be able to use it. However, according to the Oracle docs support is to clone the main node and add more nodes by cloning the context files.

  Cloning Oracle Applications Release 11i with rapid Clone [ID 230672.1]
  Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]

  Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]
  Share Application-level file system in Oracle E-Business Suite Release 12 [384248.1 ID]

  Thank you
  Hussein

• Problem writing files in the shared documents directory.

  Hello

  I'm new in the development of the PlayBook. I am trying to create an application that can save image file within the shared documents directory (so another image viewer application can find). Here is my code:

  var file:File = File.documentsDirectory;
  /////////////////////////
  Try to write a file...
  var jpgEncoder:JPEGEncoder = new JPEGEncoder();
  var jpgData:ByteArray = jpgEncoder.encode (bmp);
  file.addEventListener (Event.COMPLETE, onFile_SaveComplete);
  leader. Save (jpgData, filename);

  I got a file save dialog box when I call «file.save (...)» However, once I typed in the name of the file to save and press the 'OK' button, I got the exception like below:

  Error #2044: Unhandle IOErrorEvent:. Text = Error #2038: file IO error.

  to flash.filesystem::File$/getFile()

  to flash.filesystem::File$/get_documentsDirectory()

  .....

  .....

  The same code run perfectly on my desktop, so I wonder if there is some other restriction in OS PlayBook to stop me from saving the file in the shared document directory? So, should I sign my application with certificate?

  [I read the document and understand that 'File.documentsDirectory' must be writable...] May I have I'm misunderstanding... ? ]

  Best Rergards,

  Hey,.

  Welcome to the forums! This has just been discussed in a previous thread of yesterday. Basically, file navigation dialog boxes are unfinished and lead erros weird whenever you try to use a method that requires a browse dialog box. work around right now must use the FileStream class to write your files on the hard disk of the playbook, until all the dialogues are fixed on the platform.

  Here is the link to the previous thread. inside, you will find the work around the code that you can adapt to your needs. also, there is a little more explanation:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/saving-syntax-incorrect/m-p/78610...

  hope that helps. Good luck!

• I can storage vMotion two popular VMS with shared disks?

  I have an ESX 3.0.2 Server with local storage and two ESX 3.5 with fiber channel SAN servers. Two VM sharing disks and run it on the computer with only the local storage. Can I use storage vMotion to move these to a 3.5 servers and more at the SAN?

  If not; can I migrate the servers (when closed) to the SAN and 3.5 servers without breaking the links on shared disks?

  If you close the virtual machines and migrate them, you should be able to access the disks - as the sVmotion update pointers in the vmx file.

  If you upsize and lose access to the disk, you will need to do is open the.vmx file for each virtual computer and update the path specified for each disc, not too hard to fix at all. -If you don't like that, you can simply remove and re-add the disc in the VM properties

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily?

  the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily.right now my external backup just my computer that isn't doing me good

  original title: external hard drives

  You don't want to change your external drive to your main drive.

  You can move your music files on the external drive - or you can move other data on the disk to make room for your music on the internal drive.

  What applications do you use to play music?

  As described in the first link below, you can move your full "My Documents" folder on the external drive.  Alternatively, you can simply move your music files.  If such an arrangement would give you a satisfactory performance, however, depends on how your external drive is connected (for example, USB 1.1, USB 2.0, USB 3.0, eSATA, Firewire, network) and other hardware features of your computer.

  Not all of the following conditions will be applied to you, but some of the tips can be useful.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location.  You can not simply move the files.