Use both WiFi & printer cable or Cat5 to router?

Similar Questions

• Can I use Dell printer cable with an HP printer?

  Hi all I'm a newbie here. I think I have a HP Photosmart C4680 all-in-One Printer and I know that it does not come with a printer cable, anyone know if I can use my Dell printer cable? It is not a permanent cable. Thanks for any help.

  If the cable looks like one below, then you can certainly use it.

  

• HP Deskjet F2410: How to print using a normal printer with just a smartphone Wifi

  Hi Experts,
  
  I tried to print from my normal with a printer HP Wifi Android smartphone but do not work even though when I installed print
  Apps. I know it's because my printer is not just a Wifi wireless printer is if there is a way for me to print documents using my normal printer? What should I do?
  
  Waiting for your answer, thx
  
  Have a wonderful day,
  Jerica

  Thanks for posting the question.

  In law, there is no support if the printer is not wireless.

  But some forums States that it can be done via OTG cable. I suggest you buy active wireless last printer.

  It might be possible to implement. It seems that the phone and the operating system has the means to print pre-installed. You also have a good OTG cable.

  Ensure that under settings > impression that the HP plug is installed and turn it on. If you do not, there are the PlayStore. Plugin of HP Printing Service< -.

  After that, just the connection to the telephone cable and the printer will allow you printed media.

• is it possible to combine ethernet and wifi connections to use both at the same time

  I want to fill the two connections without using third-party software can do this combine is wifi and ethernet, all use both faster speeds for

  Ethernet is the fastest connection to use your modem/router and it will not combine or run them both at the same time.

  To test your speed, try > http://www.speedtest.net/

  or > https://www.speakeasy.net/speedtest/http://www.speedtest.net/

  If you are unhappy with the speed of your ISP, you need to communicate with them or another ISP.

• How to print the page on WiFi printer using ideapad a1

  How to print the page on wifi printer using ideapad a1

  Cloud Print (available in the game store) use Google chrome to print from the A1 motorway. You must have Chrome installed on your computer. If not connected to Google (required) or your PC/Mac/Linux computer is turned off, it will be printed when you log-n.

• HP print printable using both sides of the sheet

  I would like to be able to take advantage of the ability of the printer to print on both sides of the paper.  When I print from my computer, it is not a problem.  However, when I set up the automatic broadcast of an ePrint application (Comics, for example), the print is only on one side.

  Does anyone know how to set up connected HP Print Center to use both sides of the paper?

  -mgg4

  Hi Mgg4,

  I see you are trying to print two-sided when you use printable Hp.

  Currently, the duplex printing option is not available for Hp Printables(ePrint apps).

• I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  I have a LaserJet P1606dn - all of a sudden, I can't use the automatic on both sides print - Please help!

  Hello

  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > printers

  Right click on the printer icon, and then click Properties (printer properties for Windows7).

  Click the Device Configuration tab.

  Make sure that the option allow automatic duplex printing is checked.

  If there is no change, try to uncheck the print manual duplex option below, then check any change.

  The terms may be a little different because my OS is not in English.

  The front part / duplex must be placed at the bottom left part of the device Configuration dialog box.

  Please let me know of any changes,

  Shlomi

• sharing Windows 7 printer cable on my desktop and connect wirelessly to laptop both running Windows 7

  On my desk, I configure printer sharing, but it cannot add my laptop.

  I can use internet from my laptop using the network but no printer?

  Any help would be really appreciated

  Thank you

  Ray

  Hi Ray,

  We would like to know more about details to help you better.

  (1) what happens when you try to print by using the shared printer from your laptop? You get the error message?

  (2) is the shared printer is detected on your laptop?

  (3) what happens when you try to add the printer to your laptop?

  (4) have you enabled file sharing and printing on your laptop?

  (5) did you share the printer on the network?

  (6) you are able to print from the desktop?

  You can view the steps in the link below and then check if it works.

  Share a printer

   

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Write us with the details asked so that we can understand the question better to help you.

• AirPort Extreme A1408 (5th generation) low flow on both WiFi and wired

  Hi all

  I have an extreme A1408 Airport (5th generation), which is connected to the internet via a cable UTP (wall plug, the internet provider has its routers in the basement of the apartment building). My plan is to 1000 / 200 MB (down / up - Romanian RCS & RDS, Fib), however, I'm getting averages of 90 / 80 MB speeds on speedtest.net. The best I've ever had was about 180 / 200 Mbps, but that happened once.

  The low speed produce on both WiFi and wired (I have an iMac, a MBP, a 6s iPhone and an iPad Mini that connect through WiFi, on the 5 GHz network and a Mac Mini that is connected to the router), with my wireless devices to full signal strength and connection to 450 Mbps. Since low speeds correspond to the cable wire / WiFi (I expected to the Mac mini to outdo the other, since its on gigabit ethernet), this is not a discussion on how to choose the best channel (I tried auto or manual installation, with it on different channels) or change its placement (this corresponds with the MBP even right next to the router) to get the best reception.

  I tested the connection directly paste the cable in the MBP (via the adapter ethernet of love at first sight) and got 850 / 200 Mbps, then my provider connection works as expected.

  I also changed all cables UTP CAT 5, in order to support gigabit speeds to.

  My AirPort Extreme is on firmware 7.6.4, set up as follows:

  • PPPoE: always on
  • IPv6: link-local
  • Wireless:
    • WPA2 Personal (faster)
    • No network comments
    • the radio 802 mode value. 11A / n - 802.11b/g/n (self)
    • country of Romania
    • tried auto and manual selection of channels 2.4 Ghz and 5 GHz (by analyzing other autour networks)
  • Router mode: DHCP and NAT (NAT Port Mapping Protocol active)

  All iDevices I use are updated to their latest version of the OS.

  Is there something that I am missing? Any ideas?

  Thanks in advance for your time!

  Most likely the problem you see is that Apple has not designed the more practical to work with fiber Internet airport base stations. Although, the 5th generation 802.11n AirPort Extreme can manage, at best, 400 - 500 Mbps of throughput (in bridged mode) via its WAN - LAN interface, you will see about half of this when it is enabled as a router (as yours is.) In addition, if your ISP has their router activated ahead of yours, you can also receive a "Double NAT" error as well.

• AirPrint and WiFi printing stopped working on Photosmart 5520

  I have a HP Photosmart 5520 that worked reliably until recent days. I can print is no longer my OS x, using print wifi or iPad, using Airprint.

  My configuration:

  router - apple airport extreme ac

  MacBook pro connected by ethernet to the router cable

  iPad wifi connected to the same router

  HP Photosmart 5520 connected wireless to the same router.

  1. the 5520 has an IP (10.0.1.13) and can address the internet

  2. the router reports the 5520 is connected.

  3. the Macbook can see the scanner of the printer (such as a scanner of Hello) but not the printer.

  4. safari on the macbook can connect to the web server integrated with 10.0.1.13

  5. the ipad can't see the printer via Airprint

  I unplugged and reset the printer, put off the iPad and the MacBook, nothing helps.

  How can I restore WiFi printing and Airprint?

  Have you tried printing via a USB connection to the Mac? Because the printer will print the iPad with a direct wireless connection, there may be a hardware problem.

  At the moment, contact HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• Equium L40 - unable to connect via wifi or cable plugged ubs

  Hello

  I have an Equium L40. I can not connect via wifi or cable plugged ubs.
  It is a "Internet Explorer has stopped working. a problem caused the blocking of the program works correctly.

  He said in am connected to my hub and have a signal strong.

  Can you help me

  Thank you

  Steve

  Hello Steve

  Have you tried using another browser?
  Using Skype or some other messenger? None of them can connect properly?

  I put t know what is the real problem. Work not Internet Explore or WLAN connection in general?

• Why the Pages and Numbers do not use the default printer?

  Recently, I added a second printer to my home network and selected as the default printer. But when I try to print, the correct printer is selected in the dialog box print only part of the time and apparently depends on which application to print from. I believe that Safari, Mail, Contacts and calendar properly use the default printer, then the Pages and Numbers and instead do not the old printer unless I have change the selection in the dialog box impression every time I print.

  How can I get Pages and Numbers to correctly use the right default printer?

  The problem that is happening on my machine (OS X El Capitan 10.11.2, 5.6.1 Pages and numbers 3.6.1) and my wife (running Maverick 10.7.5, Pages ' 08 3.0.3 and Numbers ' 08 1.0.3) and has persisted through a reboot. The old printer is a HP OfficeJet Pro 8600, accessible via WiFi. The new printer is a Brother MFC-7340 connected by USB to a Time Capsule that is accessible via WiFi.

  In the print... dialog you select

  View the Presets...

  in the menu presets. In the sheet drops down, uncheck the box marked

  Reset the Menu Presets for "Default settings" after printing

  Click OK. Then select

  Last settings used

  or a custom preset that you created in the menu.

• I have a FAX failure on is not the use of the telephone cable provided.

  I have a printer HP Officejet Pro 8600 N911a. I get a 'fail', even when I use the supplied telephone cable?

  Hi Tony,

  See the following link, it contains troubleshooting you should do to solve this problem:

  http://goo.GL/cfg5x

• HP Envy 4500: Problem with WIFI printing

  WIFI printing worked both MacBook and iphone. Then stopped. Was able to print e-mail with difficulty. Implemented AirPrint, but always had problems. Finally got Apple Support help me in removing the AirPrint service and return to the regular WIFI printing. I am now able to print from the MacBook, but my Iphone says "No. Found AirPrint printers". How to reset iphone to locate the printer?

  Hi @savelad,

  Please become a member of the HP's Support Forums. I understand that you have a problem with printing from your iPhone. I'll be happy to help you.

  I can not help you reset your iPhone, but should not have to.

  May iPhone airplane mode is off.

  Make sure the iPhone is on the same network as the printer.

  Test print.

  HP also has a great app for printing from the iPhone app HP Eprint.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• How can I create a network and put in on my iphone 4S for use with wifi?

  I have a phone, a personal hot spot 4s, a router and a broadband cable. Everything is running but I can't figure out how to get my network on my iPhone for use with Wifi.  Also, I don't know how or where on the phone to set the password and since I don't have a different password, I can't use my wifi?  Help, please!  My iPhone tech is exhausted and I'm going against a brick wall with my internet service who refuses to provide me with their ISP, etc.

  Hello

  Please ask your question the following support forums.

  iPhone: Apple Support communities:
  https://discussions.Apple.com/community/iPhone?CategoryID=201

  Concerning