Use of BPMN diagrams on different levels (11 GR 1 material Business process architect)

Similar Questions

• Measures at different levels of concentration

  I'm working on a cube. I have 6 dimensions and aggregations are supposed to do at different levels for me to get the correct results, but I'm unable to implement this. I I have a fact Table equipped with all measures, I need, including sales, quantity, amount Total savings, Total etc edits. The challenge is that these measures require complex calculations, so I have a level of data in the fact table, but I think that this is the origin of the problem. How can I build complex measures calculated in the Olap Cube using a sql statement. What are the functions I should use to do this.
  
  The challenge is that, I've separated the totals of the details and I don't know of a way to get consistent results with 2 levels of granularity of diff
  
  Thank you

  You must come with some examples to get a better answer.

  A few general points.

  *(#1). * for calculated measures, look at the Expression of OLAP syntax which resembles the features of relational analytical ROLAP.
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e23381/TOC.htm

  Use this syntax to create your measurements calculated (in minutes).

  In the "Calculation Type", select "Syntax of Expression of OLAP", and in the Expression box, type the logic.

  .
  *(#2). * If for any reason, an Expression OLAP syntax cannot be used because of some complexity, then you can use old fashioned OLAP dml syntax.
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_basics.htm
  http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_functions_1.htm#BGEGGBAE

  In the "Calculation Type", select "OLAP DML Expression" and in the OLAP DML type logic.

  .
  *(#3). * You can load the relational data into different levels of OLAP cube.
  Facts on multiple levels of loading

  .
  *(#4). * You can start the aggregation of the cube to a specific level in a dimension. It is very important, because the aggregation of the cube always go leaf-level and currently there is no way in AWM to set a higher standard as the starting point for the aggregation.
  For example, let's say your time dimension a YEAR-> QTR-> MONTH-> DAY levels, and you want to leave aggregation of quarter level and not at the level of the DAY.

  You can do DBMS_CUBE. Order IMPORT_XML and provide the following syntax, so that the cube is always aggregated level quarter.

  SUM WITH 'TIME' OF MEMBERS WHERE "TIME". LEVEL_NAME = "QUARTER."

  .
  .
  Regardless of the level of complexity are your calculations, it can be done by means of (#1) ou (2).
  Best is to use "syntax of Expression of OLAP.

  I mentioned (#3) and (4) just to make you aware of other available functions.

  .

• How can I erase different levels of opacity of a color?

  I was thumbnail sketches using the Brush tool, in a single color (black) with different levels of opacity for the shading. I had milked on a single layer and on the other, but accidentally shaded shading on the line drawing and can no longer cancel/step back. I need to delete/remove shading and keep the intact black line drawing, but the PS does not seem be able to differentiate between the different levels of opacity and treats as a single colour when I try to use the erase special as Magic Eraser no matter how high I set the tolerance or selection tools, etc.. It's a simple sketch and I could draw it again, but I'm very rusty with PS and I would like to know if there is a solution in case I met this new. Prescheduled A below. Suggestions?

  

  Part three fix

  Levels adjustment layer and drag the slider of Pentecost slowly to the left.  This will gradually move the nuances that darkens the white full.  Move the black slider until it is in the fleshy part of the shadows (black) and adjust the slider to the Middle for the best effect.  You will fix with this step.  Just do a lot better.

  NOTE: you must change the blend mode of layer of brightness levels.

  I'd be inclined to remove all the colors of the image as well.  (Hue saturation, B & W adjustment layer, but do not change gray scale)

  Now select the layer levels and do a layer of copy merged top Ctrl Alt Shift (Shift Cmd Opt e) e

  Now select the brush, and then change the brush in overlay blending mode (in the options bar)

  Carefully paint on the black lines with black to strengthen and shading with white to remove it.  Need you a bit of practice.

  It took me about two minutes.  Another ten and you'll have it right, (assuming that the original is a higher resolution)

  

• Navigate trough different 'levels' in the XML file from the known item?

  I am quite new to this, so I have to ask even if it's a stupid question...
  
  I am trying to build a generic oracle procedure that can insert data into a table from a file XML so that message that it contains, but of course the messages has the same structure.
  
  I need to find the first item after data, in this case "CUS_ORD_HEAD", but it could be any message as PO_HEAD.
  So I need to somehow find the element without knowledge is the name of the element. It goes same for CUS_ORD_LINE that might be PO_LINE. Is it possible to navigate through the different 'levels' in the XML file from a known element.
  
  < CustomerOrder >
  < metadata >
  < TransActionIdentity > 1 < / TransActionIdentity >
  < / metadata >
  < data >
  < Client CUS_ORD_HEAD = 'ABC' CustomerOrderNumber '1234' = >
  < CUS_ORD_LINE CustomerOrderNumber = "1234" OrderedQuantity = "10" ProductNumber = "1001403" CustomerOrderLinePosition = "1" / >
  < HAPI_CUS_ORD_LINE CustomerOrderNumber = "1234" OrderedQuantity = "1" ProductNumber = "2530" CustomerOrderLinePosition = "2" / >
  < CUS_ORD_LINE_TEXT CustomerOrderLinePosition = '2' Text = "Test" CUSTOMERORDERNUMBER = "1234" / >
  < / HAPI_CUS_ORD_HEAD >
  < / data >
  < / CustomerOrder >

  the tablename parameter is identical to the XML element and attributes are the same as the columns

  OK, understood.

  You can retrieve the name of the element and attribute names in the same time by using something like the following.
  Attribute names are stored in a collection that is accessible iteratively in order to build the dynamic parts of the query:

  SQL> CREATE OR REPLACE TYPE TColumnList IS TABLE OF VARCHAR2(30);
    2  /
  
  Type created
  
  SQL> set serveroutput on
  SQL>
  SQL> DECLARE
    2
    3   xmldoc   xmltype := xmltype('
    4  
    5  
    6  1
    7  
    8  
    9  
   10  
   11  
   12  
   13  
   14  
   15  
   16  
   17  ');
   18
   19   --t_column_list TColumnList := TColumnList();
   20   --v_table_name  VARCHAR2(30);
   21
   22   tmp_cols      VARCHAR2(1000);
   23   tmp_paths     VARCHAR2(1000);
   24   tmp_qry       VARCHAR2(4000);
   25
   26  BEGIN
   27
   28    FOR r IN (
   29      SELECT table_name
   30           , set(cast(collect(column_name) as TColumnList)) as column_list
   31      FROM XMLTable(
   32           'for $i in /CustomerOrder/Data/descendant::*
   33              , $j in $i/attribute::*
   34            return element e
   35            {
   36              element TABLE_NAME {name($i)}
   37            , element COLUMN_NAME {name($j)}
   38            }'
   39            passing xmldoc
   40            columns
   41              table_name   varchar2(30)
   42            , column_name  varchar2(30)
   43           )
   44      GROUP BY table_name
   45    )
   46    LOOP
   47
   48      tmp_cols := NULL;
   49      tmp_paths := NULL;
   50
   51      --dbms_output.put_line(r.table_name);
   52
   53      FOR i in 1 .. r.column_list.count LOOP
   54
   55        tmp_cols := tmp_cols || ', ' || r.column_list(i);
   56        tmp_paths := tmp_paths || ', ' || r.column_list(i) || ' varchar2(35) path ''@' || r.column_list(i) || '''';
   57
   58      END LOOP;
   59
   60      tmp_cols := ltrim(tmp_cols, ', ');
   61      tmp_paths := ltrim(tmp_paths, ', ');
   62
   63      tmp_qry := 'INSERT INTO ' || r.table_name || ' (' || tmp_cols || ') ' ||
   64                 'SELECT ' || tmp_cols ||
   65                 ' FROM XMLTable(''/CustomerOrder/Data/descendant::' || r.table_name || '''' ||
   66                 ' PASSING :1 ' ||
   67                 'COLUMNS ' || tmp_paths ||
   68                 ')';
   69
   70      dbms_output.put_line(tmp_qry);
   71
   72    END LOOP;
   73
   74  END;
   75  /
  
  INSERT INTO CUS_ORD_HEAD (CustomerOrderNumber, Customer) SELECT CustomerOrderNumber, Customer FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_HEAD' PASSING :1 COLUMNS CustomerOrderNumber varchar2(35) path '@CustomerOrderNumber', Customer varchar2(35) path '@Customer')
  INSERT INTO CUS_ORD_LINE (CustomerOrderNumber, OrderedQuantity, ProductNumber, CustomerOrderLinePosition) SELECT CustomerOrderNumber, OrderedQuantity, ProductNumber, CustomerOrderLinePosition FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_LINE' PASSING :1 COLUMNS CustomerOrderNumber varchar2(35) path '@CustomerOrderNumber', OrderedQuantity varchar2(35) path '@OrderedQuantity', ProductNumber varchar2(35) path '@ProductNumber', CustomerOrderLinePosition varchar2(35) path '@CustomerOrderLinePosition')
  INSERT INTO CUS_ORD_LINE_TEXT (CUSTOMERORDERNUMBER, Text, CustomerOrderLinePosition) SELECT CUSTOMERORDERNUMBER, Text, CustomerOrderLinePosition FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_LINE_TEXT' PASSING :1 COLUMNS CUSTOMERORDERNUMBER varchar2(35) path '@CUSTOMERORDERNUMBER', Text varchar2(35) path '@Text', CustomerOrderLinePosition varchar2(35) path '@CustomerOrderLinePosition')
  
  PL/SQL procedure successfully completed
   
  

• Export data to different levels

  Hello
  
  I am trying to automate pulling a report out of essbase. The Calc of data export creates a Level0 txt file that is difficult to validate against one online report from oracle. I'm pretty much wanting to pull all top-level except accounts whiich dimension must be at level 0, I can compare the balance in Oracle Hyperion. This must be an automated solution and I will use VBScript to run Oracle sql queries. Is it possible to pull a report at different levels in essbase maxl or any other form? I'm really not familiar with Hyperion reports. Is it possible to run a report of Hyperion via a script and do produce a txt file?
  
  I really appreciate any information on this and hope someone can help.

  Out the data is quite simple using a report script. In a script to report unspecified dimensions by default to the top of the dimension, so if that's really all you need (i.e. you have no dimension that do not consolidate the Summit or otherwise should be noted) something as minimalist as...

  {NOINDENTGEN}
  {SUPPAGEHEADING}
  
  !
  .. could actually be sufficient as the report script. Script editor for the report of the Administration Console allows to develop and test the script before trying to automate. Much better control the missing / zero suppression and substition, formatting, etc. is possible. The Builder of the technical documentation section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?rw_commands_chap.html

  To integrate the report script in automation, you can watch the execution of the script of report using the MaxL "data export" command I'm assuming you can afford in your scenario. "export data" allow us you to specify a file for the output .txt. For more information, the MaxL in the technical reference section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_chap.html.

• Easy way to locate the function used on the diagram by name?

  Is there an easy way to locate the functions used in the diagram under the name of the generic function?

  I have user appears somewhat to the user on my diagram functions to help me debug a difficult sequence of agross events live multiple now that it works, I want to go back and disable most of these postings. Most of them went up to now within the layers a little structure and is not easy to find.

  So is there an easy way to get a list of where these functions are used so that I can quickly go and edit them?

  I find the function is with the display hierarchy that does just what I need.

  Thank you.

• To use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows

  Original title: change the version of Windows

  I have a computer used only for Flight Simulator and is running Windows 7 Home Premium 64-bit.  I want to use the computer with the different Flight Simulator equipment that is only compatible with 32-bit versions of Windows.  Is there a way I can upgrade to Windows 7 64 bit for Windows 10 32 bit and enjoy free upgrade of Windows 10?

  No, the upgrade program will replace existing windows with the same number of bits, 32 to 32 and 64 to 64.

  Even within the same version of Windows, passing from 32 to 64 and vice versa requires a clean installation.

• syslogging to 2 host with different levels of severity?

  I have a PIX that sends the logs to a host with Cisco syslog installed. It is configured to send messages of level 3 (as required by the internal standards) of gravity.

  I have another host which collects the theses papers too, but I want some info - level 5 or 6.

  ? is it possible to config the PIX to send logs on 2 different hosts with different levels of severity?

  you configure the pix to send to 7 on a syslog server. configure you this server to send events to the level 3 to another server. I think that it should be possible

• I'm looking for a simple list of available applications with different levels of creative cloud subscriptions?

  Boy, the Adobe web site is incredibly frustrating. It is very difficult to accomplish some very simple tasks. First of all, there should be an email address for contact. I shouldn't be forced to submit my question on a forum. It's cheap and lazy on the part of Adobe, especially when they charge a lot for their subscription applications.

  My biggest complaint is that I can't find a simple list of the applications available with the cloud creative in different subscription levels. When I search, it sends me to a video of slick 'overview' of the creative cloud which tells me zero in on specific applications available. It should be a simple list of available with creative cloud applications and a side-by-side comparison of the applications available with the different levels of subscription creative cloud. Why can't I find something like this on the web site of Adobe? I found a page that lists 15 adobe applications, but not a page that describes to me what apps come with what levels of creative cloud subscriptions.

  There are only 3 shots of cloud. Inclusions are the same for both commercial or student.

  All applications

  Desktop: desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Mobile applications: Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Same info differently formatted: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Plan of photography: Photoshop + Lightroom

  Single App plans (applications available for the unique implementation plans are in the drop-down menu on the page of the plans of cloud)

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• In the levels layer, I have only the option of 'grey '.  When I create a fill layer, I can only see different levels of grey, not the color I chose.  How can I change this?

  In the levels layer, I have only the option of 'grey '.  When I create a fill layer, I can only see different levels of grey, not the color I chose.  How can I change this?

  Hi elizabethu,

  Greetings!

  Make sure that the image is not in gray mode.

  If it is to change it to RGB mode.

  Image-> Mode-> RGB

  And try again.

  Concerning

  Jitendra

• (1) now I use Lightrom 5.7 How to level 6 or CC? (2) what is the difference between the 6 and CC vercion? (3) when I used lightromm 3, inEXIF the distance in metres to the object that I took, in the virsions later that the function has disappeared, I coul

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  (2) what is the difference between the 6 and CC version?

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  Buy the standalone update from here: products

  Download CC version here: Adobe explore desktop apps | Adobe Creative Cloud

  (2) what is the difference between the 6 and CC version?

  See this comparison chart: Lightroom compare versions. Adobe Photoshop Lightroom CC

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  Plugin ExifMeta of Rob Cole displays the distance between the subject field (and much more).  Unfortunately, his Web site seems to be down again.  He has been very active here, but he has not posted in several months.

• How can I add a donation page with different levels to give for example $ 250, $150, $50, other

  How can I add a donation page with different levels to give for example $ 250, $150, $50, other.  I'm with Foxy cart... is it possible?

  Since the end of the Muse, you can add texts as the value of the donation with paypal button that would take users to the paypal for the payment site, with Foxy cart you can try the suggestion mentioned here:

  https://Forum.FoxyCart.com/discussion/4417/donation-page-radio-button/P1

  Thank you

  Sanjit

• Use the same script in different areas?

  Is it possible to use the same script in different areas?

  I had several scripts that will validate and modify the entries in the user on different areas. Since they do exactly the same thing, is it not possible to just get out the 'real' on a field script and refer to other fields to this script?

  Of course - we have a fragment of 'commonScriptObjects.xdp' that we all have

  our common methods of javascript in.  Then we add to the form and hide it.

  then use the following reference to point to the script object:

  GET A HANDLE TO THE SCRIPT OBJECT

  var commonScript =

  xfa.resolveNode ("commonScriptObjectsFrag.fragmentScript");

  CALL A JAVASCRIPT METHOD IN THE SCRIPT OBJECT

  commonScript.setupSearch ();

  Here's something else you can do to validate our mandatory fields.  We spend in

  the real to validate field and the name of the field as a text string:

  If (! commonScript.validateRequired (mainContentSubform.customerName,)

  False return 'Customer'));

  and the validateRequired method, which is in our commonScriptObject xdp

  file, looks like this:

  validate required fields

  function validateRequired (oField, fieldName) {}

  Console.println ("enter validateRequired");

  var commonScript =

  xfa.resolveNode ("commonScriptObjectsFrag.fragmentScript");

  If (commonScript.isNullValue (oField.rawValue))

  {

  xfa.host.messageBox ("Please fill out the '" + fieldName +)

  ("' field.", "Error", 3);

  xfa.host.setFocus (oField);

  Returns false;

  }

  Returns true;

  }

  Hope that helps,

  Elaine

  ocen12 [email protected]>

  29/07/2009 09:26

  Please respond to the

  [email protected]

  TO

  Amal [email protected]Schmitz >

  CC

  Object

  Use the same script in different areas?

  Is it possible to use the same script in different areas?

  I had several scripts that will validate and modify the entries in the user on

  different areas. Since they all do exactly the same thing, is not

  possible to just get out the 'real' on a field script and refer to the

  other areas of this script?

• When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details"

  When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details". Unfortunately, there are no errors listed below and the green bar is frozen on the screen. The message remains in my Outbox and repeated again and again sending. There is absolutely no record and file sent in my sent box. TIA - Ernie

  You have apparent dbx file corruption. A common problem.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• If I go to your stand at the NEC photographic show (21-24 March) can I expect to get personal help with using of items 13 - esp. vertical correction and the addition of sky to architects plans?

  If I go to your stand at the NEC photographic show (21-24 March) can I expect to get personal help with using of items 13 - esp. vertical correction and the addition of sky to architects plans?

  No, but Adobe offers a discount on the price of admission to the entire show. Adobe seminar room will be back this year yet, but are of demonstrations and public seminars. A number of speakers UK will be available, but the emphasis is on creative cloud, Lightroom and Photoshop CC.

  http://blogs.Adobe.com/richardcurtis/?p=4100