Use of e/s to 100% of the network

Similar Questions

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• Using too much CPU only when loading the network

  When FF works closely with the network (wired or wireless) card for access to the network, CPU utilization spikes in way more than 70% and he stayed there until the page loading process finishes web.
  After the upload is complete, the CPU usage remains somewhere between 5-10%.

  When I look at clips youtube 1080 p, where FF is duty next buffer part of this clip I watch, new CPU use peaks above 70% with the flash plugin and gives a total of a 100% of cpu for a few moments and use which make this clip to stop playing or to frame bad times, and ties.

  I have been activated in about: config webgl acceleration to activate the force and that much improve the initial problem, then I activated gfx.direct2D - activated force and also to improve the problem remaining.
  I also disable the safe_mode parameter file adobe flash config protectedmode = 0.

  I have to mention that the initial problem was way to bad ... 
  

  Now I get to point when I don't know what to do so that FF does not use much CPU loading pages.
  As you can see I use to publish this version of Nightly 64 bit (I think it's the 64-bit version...) which is much more better and I would like to read youtube 1080 p clip normally, after that I have wait a few moments to buffer, before starting to play.
  Version 32 bit FF won't let me watch YouTube without framing hurt when the clip is buffered.

  I was monitoring the Task Manager and all the processes listed... and there, I can't blame antivirus or firewall to the peaks of the processor. Also if I do the rest of the network traffic, as well as inside the network custom CPU even file copy flinch.

  Can someone help or give an opinion on what setting to do, so I can eliminate these spikes?

  Thanks in advance!

  Problem solved partially:

  I have observed that the CPU spikes occur not only while I use FF or mozilla nightly, but on all web browsers (Chrome, IE, Opera, etc) that I have used, while these browsers accessing the network.

  Uninstalling the firewall of the solution of the AV portion has helped a lot and by also disabling the bed in the firewall solution of W7, but for long term use, this isn't the right answer (for my at least). Without any firewall FF work or installed works like a charm, while the CPU usage is increased at a decent level of 50% max (total tasks and running services)!

  Anyway, as I said earlier, my pc without any firewall operation is not a good think to do, so I'll replace my computer with a faster, or I'm going to overclock it at a level that zapping INTERNET and navigation will not infringe too much on the performance of the system, or... I live whit it and I accept the limitations...

  Perhaps, in the development of the FF, programmers will keep in mind that not everyone on this planet has powerful processors - and... give a few options... to decrease the CPU at acceptable levels, event, even if they use the firewall solutions that violate on the CPU while FF is buffering of data across the network.

  I should also mention that Mozilla nightly (64-bit) and FF, are always better then IE - in my opinion - which is.

• use time capsule 4th generation to extend the network

  Can I use the time Capsule (4th generation) to extend a network? I would like to connect via Ethernet to a router (Belkin) of non-Apple. Thank you.

  -> Belkin router-> Ethernet cable modem-> Time Capsule-> wifi network products in another part of the House

  Yes, it works perfectly.

  The TC will be in bridge mode...

  

  The wireless will be defined to create a wireless network.

  You can use the distinct name to the Belkin Wireless... or you can use a name identical to the Belkin with identical password wireless and security setting... This is called roaming network, so in theory, you can wear around your wireless devices and they swap "tours" as a mobile phone... Sounds good in theory... a little less than the sum of the parts actually.

  

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Exclude the network using BGP network command

  Hello:

  I am using BGP and I do redistribution of OSPF into BGP while I read the best way to do it is to use the network command.

  Now, I do the redistribution of OSPF in BGP using a list of prefixes that specifies the network to redistribute.

  Is possible to do so by the order of network?

  My network to redistribute is the 8.0.0.0 / 8 but the 8.0.0.0 / 16 is excluded.

  The IGP network is with specific directions of IP, so I think I also use the Auto-resume option or set the order of the aggregate-address.

  Another option that I prefer is to advertise the network into parts because some routers of entry to ACE are better for the first part of the network and the other are better in the second part. So I intend to announce that this networks.

  • 8.0.0.0 / 9 (excluding 8.0.0.0 / 16)
  • 8.128.0.0 / 9

  Thank you very much for your help. In this case, Juan.

  Hi you

  By default, network control announce only mask what u applied and it should be existed in the routing table.

  Another option, you can use the roadmap as well with the network command

  Respect,

  Kazim

  "Please miss me so useful post.

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Unable to connect to the network share after the Microsoft Account

  I am running Windows 8 Pro and if I setup with a local account, I can access my server to NetApp files very well. As soon as I switch to a Microsoft Account, I can't connect to file shares. I get "the specified server cannot perform the requested operation."

  How can I use my Microsoft Account and still access the network share?

  Also, I have a laptop running Windows 8, connected to the same network that can access the share file very well. I already tried a "system refresh" and complete a reinstall.

  Any suggestion?

  If you map a drive to the share and select Connect using different credentials and enter your local account information it works?

  You can map a drive by:

  1. Right-click on computer.
  2. Select the network drive mapping...

• The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

  Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?

  Hello

  1. have you made no hardware/software changes before the show?

  2. using an internet connection wired or wireless?

  3. are you a specific error message while trying to go online?

  Follow the steps mentioned below

  Method 1: Restart the computer using safe mode with active network.

  a. restart your computer.

  b. When you see the logo of the manufacturer of the computer, press F8.

  c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  Now check if you are able to connect to the network, if the problem persists, follow the next method

  Method 2:

  Follow the steps mentioned in the link and check with the question.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Method 3:

  Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.

  It will be useful.

• CPU use 100% for the NT kernel & system

  On the Task Manager CPU usage is 100% for the NT kernel & system so my PC is going very slowly
  AMD Athlon X 2 7750 2.7 Ghz
  2 Ghz of RAM

  Hello

  See following message if you suspect malware has a role to play.

  CTRL SHIFT ESC or right click on taskbar - task manager.

  Manager of task - performance tab - resource monitor - any info on what might be executed on the
  CPU box (click on the small neighborhood down right).

  What happens in Mode without fail - repeatedly, press F8 as you boot?

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac.

  I can't download contact sheets to the site ftp continues to receive "an error occurred sending the file: access denied" it used 100% of the time, then about 70% not at all, having to send boards contact my clients. Using Version 6 on Imac. Any suggestions on how to make it work again?

  Hi Dayg,

  Please check your FTP settings in Lightroom.

  Are you able to connect and download using another FTP Client?

  Also try the steps below: -.

  1. from the Web in Lightroom module, click export instead of loading.

  2. save the Gallery to a location that you can find easily (like your desktop).

  3. manually copy the Gallery of his location to save to your FTP server.

  Let us know if that helps.

  Kind regards

  Assani

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Best way to extend the network of Apple using Cat5 and wireless, but with access to the same network

  Appreciate any help here.

  I need to extend my network coverage for the part out of my house where the current signal does not cover.

  I have a Time capsule in the office connected to my Modem and then created a wireless (XXXX) network that connects to the extreme in my front room... .well when I'm in my room before the signal does not increase when I go near the extreme... and maybe it's that I'm still picking up XXX to my Time Capsule wireless network.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5 and therefore the extreme would be able to stream my network wireless XXXX?

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which currently gets no signal... then do cela via Cat5 to the EXTREME at the 3rd device... or must it come directly from the TC?   (and again... the 3rd device will also be able to broadcast the network XXXX?

  Ideally, I want the network to be possible STB and flavours around the House, and I think that the connections between Ethernet devices would accomplish that... but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX wifi network I have printers, VPN, etc all together towards the top on.

  Oh... and 1 other point, I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... is - it possible... and that has to be directly connected to the time Capsule and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Hope that makes sense... but please let me know if you need more details.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5

  Yes. Hate to be picky here, but I hope you'll use CAT5, CAT5e cabling being quite a bit obsolete.

  wireless network and if so the extreme would be able to stream my XXXX?

  Yes

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which gets currently no signal... then do cela via Cat5 to the EXTREME at the 3rd device

  Yes, but it would be preferable to cables to connect the 3rd to the main TC, if that's an option.

  or does have to come directly from the TC?

  No, but it would be better if she could, if this is an option.

  and once again... the 3rd device will also be able to broadcast the network XXXX?

  Yes

  and I think that the connections between Ethernet devices would achieve this

  That is right. Ethernet is always the best choice in terms of performance.

  but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX same wifi network I printer, VPN, etc all together towards the top on.

  That should work well.  However, you may not aware that most of the PC and iOS devices not 'automatically' between different wireless access points as they move from one place to the other.  For example, you have your iPhone near the time Capsule, so he'll be looking for a strong signal from the time Capsule. If you move the close AirPort Extreme iPhone or any other device 3rd... the iPhone usually will stay connected to wireless Time Capsule... even if a stronger signal may be available in another wireless access point. Nature of the beast with IOS devices.

  Thus, with most of the PC and iOS devices, you will have to get used to temporarily turn off the WiFi on the iOS device when you move from one place to the other, then re - turn on WiFi once the device is close to the other wireless access point. The iOS device then generally will pick up the strongest signal from the nearest access point.

  Portable Mac computers will generally do a good job of automatically 'switching' to pick up the best signal of different access points in you walking the laptop around the House.

  I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... It is possible.

  Yes, but the Time Capsule and AirPort Extreme Gigabit Ethernet ports or 10/100/1000, then the switch is going to limit the maximum speed on the network at 100 Mbps when the devices are capable of much higher speed.  If you plan to invest in the installation of Ethernet wiring around the House, then you also want to invent a new Gigatibit Ethernet 10/100/1000 switch, because it will allow up to 10 times faster compared to a 10/100 switch network connections.

  can do this via Cat5 to the EXTREME at the 3rd device... or need to come directly from the TC?

  Yes, but it would be best to connect the switch to the time Capsule if it is an option.

  and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Yes

• Satellite 1800-100: moves the pointer of the Touchpad is

  Hello
  I use my Toshiba Satellite S1800-100 with Accupoint II Touchpad.

  But when I do not use the touchpad, the pointer moves itself. I use Windows XP Professional and tried to disable the option "Enhance pointer precision" in the properties of the mouse, but it still happens. I use the XP driver internal standard mouse PS/2.

  I also contacted Toshiba support team,

  Any idea?

  Thanks from now.

  Hello

  I had the same problem on my Tecra M1. First of all, I tried to remove the blue cover since the pointer of the mouse and remove dust. Unfortunately, it was not better and I made contact with the technicians. The result was changed to keyboard. The pointer of the mouse was defective. Now, I have no problem.

  I recommend you to swap the keyboard.

• automatically optimize for costs of life battery batt to 100% within the parameters of the power manager

  In the settings of my ThinkPad Power Manager W530, I chose the option "automatically optimize for life battery" (battery-> maintenance-> Mode of Charge of the battery). Nevertheless, he always fresh and keeps the battery at 100%. Is it normal for a battery 9 cells?

  Link to photo

  But many articles and discussions here at the forum State, actually in charge at 100% is not tor good battery life (see for example this article http://forums.lenovo.com/t5/Welcome-FAQs-Knowledge-Base/How-can-I-increase-battery-life-ThinkPad/ta-... ). Do not miss anything?

  Thank you!

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  No matter how many charge cycles the battery on it, just the time where you change the batteries maintenance mode. If you have configured to maximize battery life, the battery may charge at a lower percentage (somewhere around 90%, more or less a few percentage points), but will show this figure as "integral" or 100% for the system. If you change the mode to load completely, then the maximum capacity will change to read the actual capacity of the battery.

  The only way your situation would be a concern if, after setting the battery in order to maximize the battery life, then using the system on battery and load up once again, the battery always charged up to the full 94 w/h instead of reducing the number.