Use of high battery of passport blackBerry 10.3.2.2876

Similar Questions

• Can I use a Latitude battery in my Inspiron?

  I ran the battery down in my Inspiron 5720 while I was working there and in desparation he swapped for my Latitude E6540 battery so I could continue to work. To my surprise, it works very well. She normally perceives and the laptop shows the percentage of battery normally. As the Latitude battery has a capacity higher than the Inspiron battery I get a longer battery life.

  So my question is can I carry on using the Latitude battery or it will damage my Inspiron?

  The battery model number Latitude is N3X1D while the original Inspiron battery is a 8858 X. The batteries are physically identical.

  Hi johnhsrennie,

  Thanks for joining Dell Community Forum.

  You can use the battery at your discretion that we recommend to use the E6540 Latitude on an Inspiron 5720 battery.

  Please private message us the serial number of the system with your email ID, if you have any questions.

  (Note: Please do not mention the id of service tag or by e-mail on the public forum because it contains your personal information).

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!

• Use of the battery by app is no longer visible

  When my iPhone was brand new I used to see the use of the battery by app, but the small blue clock next to the "use of the battery" icon in settings/battery disappeared after a week or two. How do I get it back?

  How many minutes he normally brings to see app use? It looks like half an hour is not enough.

  I have the latest version of the system 9.3.4.

  The first thing to try, if you have not already, is a reboot or a forced reboot:

  Restart your iPhone, iPad or iPod touch - Apple Support

  If this does not help, then a backup/restore may be in order:

  The backup of your iPhone, iPad and iPod touch - Apple Support

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  If this does not help, you may need to reset as a new device (which will lose your settings current, data, etc.):

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

• Use and standby battery Iphone6s time

  A few days ago, I got a replacement from apple (iPhone6s) phone and drains battery much faster compared to my previous iPhone6s. So I went to check the use of the battery and the day before, the usuage and Eve has the time (1 to 2 minutes of different sometimes). Is this a problem? All my friends who have the same phone as me doesn't work not I have this problem. Their sleep are usually much longer and their phones have a life better battery.

  Hi there Anson_,

  It seems that the software on your phone is not properly read the queue time and use. I would start by quitting the application settings on your phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Who should get the info to update properly, please use the Apple Support communities.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• Mail uses my iPhone battery 6

  I have an iPhone 6 with 9.2 running on it.  When I finally upgraded, I continued request to enter my iCloud password settings.  I think that I have fixed (somehow), but now my battery runs completely in 12 hours.  The info on my phone says that my e-mail program uses 81% of my battery, especially with the background activity.  I basically do not use my phone to check my emails, except very occasionally if I'm away from home.  I turned it off iCloud mail now, but the phone is still losing power.  Any ideas?  Oh - and I have my setting to manually extract any message.  Thank you-

  Hi Nancy,.

  The resources below provides a few additional ways to save battery life on your iPhone.  Try these options.

  On the use of the battery on your iPhone, iPad and iPod touch

  Check the battery usage

  Go to settings > battery.

  To see how long each app has been opened and the screen and running in the background, press on . Under each app, you might see these usage types:

  • Background activity means that your battery is used while the applications running in the background.
  • Audio means that apps to read audio data when running in the background.
  • No cell phone coverage and the weak Signal means that your device is looking for a signal or used with a weak signal.
  • Backup restore & indicates that your device has been backup on iCloud or restore from a backup to iCloud.
  • Rental and leasing of background means that your battery has been used in the follow-up of your device.

  Settings to improve the battery life

  As you watch your battery usage, you could get a suggestion as activate the auto brightness or brightness adjustment. This is because iOS has determined that the change of these parameters might improve your battery life. You can also see use since last full charge times.

  Use the low power Mode

  If you wish to extend your battery life, turn the low-power mode. This reduces power consumption until you turn it off or charge your iPhone at 80%. When low power mode is enabled, certain parameters and features like fetch mail, Hey Siri, background App update, and some visual effects are reduced or turned off.

  To enable or disable the low power Mode, tap Settings > battery.

  Your iPhone will last longer before that you need to load, but some features may take more time to update or complete. Some tasks may not work until you disable the low-power Mode, or until you charge your iPhone at 80% or more. After that you charge your iPhone at 80% or more, Low Power Mode turns off automatically.

  Low power mode reduces or disables these features:

  • Email extraction
  • Hey, Siri
  • Background app refresh
  • Automatic downloads
  • Associations of Wi - Fi
  • Some Visual effects

  When low power Mode is turned on, the battery in the status bar will be yellow. You will see and load as a percentage.

  Low Power Mode is available only on iPhone.

  Last modified: 18 September 2015

  Take care

• Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new

  is it because of power problems?

  Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.

• Signal low iPhone in the use of the battery (6 apps with weak signal)

  Hello world

  I bought a second hand Iphone, it works fine but the battery runs out quickly when I use it (especially on safari). In the use of the battery, I see always weak signal under the apps and always under phone, even though I have 4/5 bar. I have yet found a solution...

  https://drive.Google.com/file/d/0B0aW-K-0VfulQW1LVVJCVHc0OW8/view?USP=sharing (here's a screenshot)

  Thank you in advance, I hope that your answers will help me.

  Hi luca9903,

  I see you are a new user here in the Apple Support communities - welcome! I hope we find you often contributing in the future.

  If you have short battery life when you are using your iPhone, you can use the information on this page to help extend - Batteries - maximize Performance - Apple

  Thank you for using communities of Apple Support.

  Sincerely.

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• My new battery of curve blackBerry smartphones is nt get on...

  Help, please... I bought a new battery for my blackberry curve 9360 and I put it inside my PPC but its nt powered... after that im load for the last 24 hours continiously but my power is not only a burden for the symbol appears... Please help as I need to do now...

  @Rajdeep-Rishi

  Remember, it is a community user support forum. It might take a little longer than 7 to 8 minutes for a person to answer, so there is no need to post "Please help" of a second.

  1. Why do you have a new battery?

  2. after loading the battery IN the 9360 for the last 24 hours, remove the battery and reinsert again, what is happening on the screen and with the upper red LED?

• has anyone used webserive with kxml library to blackberry?

  has anyone used webserive with kxml library to blackberry? If so can u please guide me and give me the example for the same...

  I mean examples of code for blackberry...

  Yes I want to read the xml response, but I want to read using xpath, which is possible using the kxml2 library. but for this I couldn't find the example so I need...

• Impossible to use the extended battery T420 extension

  It is quite disconcerting to have the laptop stop and be empty when the battery life indicator said there is more than 6 hours of life left.

  My T420 has a senior 55 + and 27 ++ long battery life.  If the main battery is used to power, when the main battery reaches 0%, it will fail to pass the long battery life and die.  It's not only to stop, it will stop.  Windows don't like this.  If the computer is using the extended battery for power, it can switch successfully to the main battery when the battery reaches 0%.

  There seems to be no way 'approved' to force the first laptop using the extended battery.  I got this laptop a few weeks, but in my experimentation, the laptop uses preferably the battery with the lowest percentage of all.

  For normal use, long battery life load profile I programmed to stop at 95%, this will get the laptop started on right stack when the two are connected, but not help if I'm out and on the use of the main battery and want to extend by adding the long battery life.

  The only method I found to force the laptop to use the battery when the main battery is low-capacity must simply remove the main battery.  Of course, to do this, I have to either stop the laptop or the put it hibernates in.  Then, remove the main battery and attach the long battery life.  Reboot the laptop.  So far, I have no problems with this method. The laptop is perfectly happy with just 27 ++ battery attached.  But if I'm going to pass the batteries, I might as well have an extra 55 ++ lying around and waive the 27 ++.

  Would be nice if Lenovo could provide instructions or a software patch that would allow me to tell the laptop to use preferentially the extended battery as soon as it is available.

  The way the system is designed, it's that you won't always unload the 2nd battery first, not the main battery. If this is not the case, check the switch on the 2nd battery. Make sure it is in the position "on / green.

• Passport Passport blackberry blackBerry battery

  Hey I just got my passport I must charge for 12-24 hours for the first time?
  Or use it until the end of the battery and then load it?
  Thank you

  good reading

  http://supportforums.BlackBerry.com/T5/BlackBerry-PlayBook/lithium-battery-myths-dispelled/TD-p/1043...